Controlador afro Delgado 20Amp del Multi-rotor de velocidad del motor (SimonK firmware)

• Overall
• Quality
• Value

Excellent ESC's!

Jan 12, 2018

I have been using these ESC's for the last 6 months with an accumulation of 70 flights. They have stood the test of many very hard crashes without a hint of problems. I would buy more but these are still going strong! Most definitely recommend them!

• Overall
• Quality
• Value

Great esc

May 16, 2017

Fit well in my Phantom1.
You can flash blheli on them.
Over an year and no issue.

• Overall
• Quality
• Value

Customer Rated

Jul 07, 2016

Great little esc, fits nicely in my 16mm arms. I was a little concerned about cooling with it inside the arms, but it was never an issue. Although the esc board is rated for 30a and the wires limit the esc to 20a, I would not recommend exceeding 20a per esc especially if you are running the esc in the arms. I was easily able to flash this with the afro flash tool, and found that running BLHeli ran the motors smoother than SimonK. Overall this is a great light weight solution and allows for clean wiring. Note that the esc is very slim and long so make sure your arms are long enough if you plan to run internally.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 28, 2015

What a helpful size, i used 4 pieces in my Quanum XJ470 multicopter. They find a place in the motorarms with a inside diameter of 15mm. I use them with 2113 motors up to 4s!

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 27, 2015

Excellent esc for racer...its very lite and fist for my 250 racer...willing to give 3 stars for the late shipping, Hk had removed all other option of shipping...Thank you HK

• Overall
• Quality
• Value

Customer Rated

Jul 09, 2015

I've purchased the "Afro" brand ESC's in the past and was a little worried about this "smaller" one. It's nice and small and just plain "works" with no issues. I was worried about the 20awg wiring so I "upgraded" it to 18awg and upgraded the firmware to the latest version and so far I have had no issues. The "Afro" brand of ESC's are the only ones I'll buy.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 08, 2015

Good lightweight quality product for the price

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 10, 2015

commander pour rentrer dans les bras d'un tarot fy650 de 16mm de diamettre une fois tous les cable virer il est super leger et ne chauffe presque pas gain de poids et facilite d'intgration

• Overall
• Quality
• Value

Customer Rated

Feb 06, 2015

30A ESC in the size and disguise of a 20A ESC. Great for pushing the limits. One star less for quality because out of 6 one was shorted-out but price-wise still can't complain, just buy some spares.

If you use Pixhawk/HKPilot32 then make sure you set RC_SPEED to 250 (the maximum PWM frequency of which the 1KHz ESC speed is divisible) to avoid stuttering/sync issues and latest SimonK firmware!

Shame there is not more documentation about the I2C functionality because native 1KHz control frequency would be ideal and some flight controllers support that. Pixhawk too but that also lacks documentation. Anyway, it works well on Pixhawk with the right settings and firmware.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 07, 2015

these have been great on my quad and tricopter.



Don't forget to pick up a seperate BEC for powering flight controllers and servos