Aleación de disipador de calor del motor para el motor 36 de tamaño. Esto está diseñado para adaptarse a un motor de 36 mm de diámetro.
Longitud: 28 mm
Diámetro: 36 mm
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):
Fits well, seems to do a good job at dissipating heat. Looks really niceBought because no other motor heat-sinks were available in EU warehouse during purchase. The quality of the material is great and the cooling fins are quite long, but on the other hand the cooler covers only about 190 degrees (it "snaps" to the motor, no additional fastening required) so only 50pcnt of the motor is cooled (other coolers usually cover 3/4 of the motor). Also it's only 28mm wide so you need 2 pcs to cover larger motors.
OK item but you can get much better value for your money from other products. Use only if you are space constrained.I use this heatsink on a velineon 3500 motor. It fits perfektly. It is better as the red heatsink with cooler.pasuje na540 chlad dobreCheap insurance for motor health! It fit tightly onto my Traxxas Stampede 4X4 VXL stock motor (Velineon 3500) and got quite warm after a hard run with a Nanotech 2S pack. Works well.
For 3S running with this motor, I smeared a small (SMALL!) amount of thermal transfer compound under the heatsink to maximise heat transfer, then screwed in a couple of 5V fans (wired in parallel to the ESC's fan JST output plug) to keep it operating under Traxxas' recommended temperature of 93 deg C (which it does with plenty to spare).
Easy to recommend.Fits nicely on 540 motor, however it doesn't quite fit in slash 2wd chassis.. It fits, but not by it's all area. It may fit perfectly on slash 2wd with 550 motor., , ,fits 36 size motor perfectly. one thing I didn't like - the edges were too sharp so I had to grind it slightly down with a file. overall the sink gives a good cooling for a motor