Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Ángel RC 920 Velero 1840mm (Plug and Sail)

Generating Links

Ángel RC 920 Velero 1840mm (Plug and Sail)

Precio:

Now save ahorra 0,00 € 0,00 €

135,37 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
113000052-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Tome un descanso de la norma, sentarse y dar veleros RC intentarlo. No confundirse pensando en veleros son lentos y aburrido. En una fuerte brisa que pueden ser extremadamente rápida y realizar giros rápidamente, demostrando ser muy emocionante. HobbyKing que el ángel 920, trae la manera perfecta para entrar en el apasionante mundo de veleros RC.

El velero Ángel 920 viene enchufar y listo navegar. Sólo tiene que instalar su propia radio superficie de 2 canales, el montaje final completo y listo! Siguiendo el modelo de océano yates de carreras en marcha, el casco del Ángel está moldeado de material compuesto de fibra de vidrio con una capa de gel y esmalte perfecto acabado pintado vibrante. El apoyo a la vela mayor colorido impresa nylon rip-stop es un mástil principal de aluminio resistente. Todos los artículos necesarios están instalados, incluyendo cabrestante vela mayor, servo de dirección, aparejos, velas y el hardware. La protección de sus equipos electrónicos caros es una escotilla resistente al agua, escondido detrás de una cabina de pasajeros de imitación. Vestir a la modelo son algunos detalles escala como volante y los carriles de la cubierta.

La quilla pesada estabiliza el Ángel, incluso en una fuerte brisa, sin embargo, que va a seguir adelante en vientos más ligeros también. Si va a navegar predominantemente en los fuertes vientos, la quilla ponderada tiene una cavidad hueca que le permite añadir lastre adicional si así lo desea.

Deja la pista al muelle y ver lo que puede hacer. En una tarde caliente del verano no hay nada como sentarse, relajarse con una bebida fría y experimentar la emoción de navegar en el Ángel 920.

caracteristicas:
• Plug and Sail - Instalar el tipo de receptor y la batería
• casco de fibra de vidrio moldeado
• acabado de alto brillo pintada hermosa
• brillantemente impresos velas de nylon rip-stop
• timón instalado previamente y vela servos cabrestante
• quilla desmontable
• Expositor de madera soporte incluido
• mástil principal de aluminio

Especificaciones:
Longitud: 920 mm
Altura: 1840mm
Ancho: 200 mm
Área de velas: 0.40m2
Proyecto de la línea de flotación hasta la parte inferior de la quilla: 350mm
Rig Altura desde la cubierta hasta la parte superior del mástil: 1400mm

Necesario:
2 + transmisor de canal y el receptor
4.8 ~ 6.0V batería del receptor

  • Angel Sailboat
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Toylander | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2016

Excellent introduction into the world of sail boats, at a very reasonable price, just add your own receiver, an rx battery and ballast the bulb and you will be sailing in no time. It does what it says on the box. Given my first one, now bought a second one so we can have races.

Once you know what you are doing you can upgrade the rigging and fittings, the only mod i would make straight out of the box is the mast joiner, i made one from hard wood 150mm long to stop the wobble.
You will need about 1500 grams of the smallest lead shot you can get and some resin , i used acrylic with worked well but takes a long time to set.

Greg | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2016

Having had this boat for a few months now, here are my comments. The hull is excellent, well moulded and stiff. The keel bulb can take about 1.4kg of lead shot which I kept in place by pouring epoxy into the bilb. The keel fin is very flimsy and bends sideways alarmingly when the ballast is attached. I made a new fin from Douglas fir sheathed in glass cloth - much stiffer. The joiner for the two piece mast is too short and gives no rigidity to the join. I replacd it with a 6" length of wood shaped to fit inside the mast. I replaced the rigging with wire and turnbuckles and replaced the rubbish spreaders with a single set of proper spreaders at half height plus a set of lower shrouds. I also replaced the mast crane with a longer one. With a decent rig, the boat sails pretty well. The winch has too much travel and I only need half the movement of my transmitter stick to go from fully in to fully out. I am thinking of making a new mainsail as the stock one does not set at all well. Overall, good value for money but it does need some fettling to get the best from this boat.

noviembre | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 10, 2014

First navigation, just great, virtually no wind but already good speed.
I put 1,550 Kgrs Lead in the torpedo, it's perfect

Brett | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

Great new boat from the Shunbo Range, a good match for the Phantom. The wide beam and aft section of the hull gives it the most modern shape of the fleet, and longer nose section in relation to the Jib gives it more stability downwind. As with all the range several mods are required to make this a reliable craft, such as adding internal foam buoyancy (sinking prevention), waterproofing the 2 Servos, adding 1.6kg or more lead ballast. The plastic mast crane needs to be replaced with one that extends 80mm rearwards so the backstay clears the Mainsail. (see file section for photos). Optional mods include replacing the plastic chainplates with 3 position alloy ones. With a 3S 800mah LiPo and UBEC supplying power, I get 8hrs run time. Consider getting a spare Monsoon Mast and Sailset to run as a smaller "B" rig in heavier (12 knots) conditions. See Shipshape RC for lots more information.

pilotoheavy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 31, 2014

va arribar amb la cabina i tapa dels servos trencada. d'origen i no per el transport. construccio fora matusera

David | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 26, 2014

just set this boat up (07/24/2014). this is my first and must say It is very nice boat, so nice it may never see water only cause it is a very impressive piece to look at.

mxhead692 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2014

Boat comes well packaged and looks great, however, there was supposed to be a plug in a small hole in the stern (my cousin also bought one, his has the plug in it!), I didn't notice the hole, boat filled about halfway with water when I tested the boat in a swimming pool for about 15 minutes, and now the winch servo is TOAST! Servo has an O-ring so it's SUPPOSED to be waterproof, or at least water resistant, but it's not! Only replacements are in 'international' warehouse so shipping cost would negate any savings over a $50 Hitech servo. Not a happy sailer here Hobby King!!!

bill987 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 03, 2014

Bien emball. Tout simplement superbe navigue trs bien mme par gros temps

Archivos de clientes
No File Name Download [42]
No File Name Download [100]
No File Name Download [54]
Manual Download [18]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios