-
Descripción
del -
No se enoje, se enoja! Tener algún gran diversión en el parque o en su club con este fantástico modelo Mad Bird. Hecho de espuma dura impresa PPE es virtualmente indestructible y se ha cortado con láser para un montaje rápido y preciso.
Se suministra con fibra de carbono de refuerzo, varillas de empuje de metal y un motor de montura de madera, todo lo que necesita es algunos servos, un motor, ESC, su receptor y una batería 3S para conseguir este amigo de espuma de pluma en el aire y en lugar de estar loco, será sonrisas en todo!
Especificaciones:
Longitud: 690mm
Envergadura: 800mm
Peso: 160 g
Se requiere: (Recomendado)
Motor: 2208 - 2212size 1400 - 2600kv
ESC: 20-40A
Servos: 9g x 3
Objeto: 5-8 pulgadas
Batería: 1000 - 1500mAh 3S -
Product
Specifications -
Información adicional
-
SKU (Número de Referencia):
9700000003-0
-
Brand:
H-King
-
Peso ( g)
954.00
-
Longitud
820.00
-
Ancho:
31.00
-
Altura:
515.00
-
canales
N/A
-
Motorsize ( diam - o - cc )
N/A
-
Envergadura ( mm ):
800.00
-
Length(mm):
N/A
-
SaleWeight ( g )
N/A
-
Marco / PNF / RTF ( mm )
KIT
-
IC / 2 : Elec:
N/A
-
Capacidad ( mAh ):
No
-
SKU (Número de Referencia):
-
Community
Discussions -
-
Rate&
Review -
This plane is easy to build and easy to fly. I'm using a Blue Wonder in 1500 kv,,HXM2730-1500, 10 amp esc, 8x4 prop, and a 1100, 3s nanotech batt. I put extenders on the elevon servos as more aileron travel is needed to get a good roll rate. It takes a licking and keeps on ticking due to the EPP construction.I was amazed at how well this odd-looking Bird flew. It's fast or slow, whatever you want. I'm not a great flyer, but even I was able to keep the Mad Bird airborne. The elevon setup is really all you need to fly well. It has a huge rudder, but I never even used the rudder to fly with all kinds of loops and rolls. The EPP foam is thick, tough and well cut. Even after a few rough landings it looks new. The color is not especially bright, so I wouldn't recommend flying in low-light situations. I'm using a 2212-1400kv motor, 30 amp ESC, 7x6 APC slow-fly prop and 1100mah 3s battery. It's a good, unique fun flyer.Kit is very minimal but everything you require to build except glue.I used the UHU poly glue all round and it was very easy to assemble.Use the information for the power plant and it flew straight out of the "box",great fun to fly and very stable in slow flight.almost down to walking pace no problem.This bird is noy mad it is absolutely brill.This kit is OK. but ht ecarbon reinforcing rod broke twice when I applied hot glue to the joint where it passes through the side wall of the fuselage. Obviously the heat softenes the carbon strip and it hen fold under the tension. I had to cut the strips to 4 equal lengths and glue them in place instead.
-
Upload
Videos -
Upload
Files
- esc
-
-
Turnigy AE-25A Brushless ESC
8,30 €
-
- battery
- servo
- motor
- acc
