Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

Arkbird 433 MHz Canal 10 UHF módulo FHSS / estación repetidora con receptor

Arkbird 433 MHz Canal 10 UHF módulo FHSS / estación repetidora con receptor

QTY:

Now save guardar 0,00 € 0,00 €

91,70 €
Stock:
Peso:
270 g
SKU:
421000003-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Por largo vuelo FPV gama, Arkbird han producido este sistema de radio Módulo de estación repetidora y compatible con todos los transmisores. Usted puede conectar este transmisor en los pines del módulo en la parte posterior de su transmisor PPM o utilizarlo como una estación repetidora enchufándolo a cualquier receptor, haciendo de este el más versátil y fácil de usar para la unidad de larga autonomía de vuelo FPV. Dispone de salida de potencia ajustable de 100MW-1400mw dando una excelente gama y opera en FHSS para el salto de frecuencia efectiva.
Totalmente compatible con el piloto automático y el sistema Arkbird menús de pantalla, se puede conectar a través del enchufe de 3 hilos y proporciona funcionalidad completa del canal 10 mediante la conversión de los Ch 1-4 existente en Ch 7-10. Esto también permitirá que la unidad Arkbird para controlar un cardán cámara con el aumento de la estabilidad regulable (firmware Arkbird OSD necesita ser actualizado a v3.1020 o más reciente). Esta unidad es realmente la solución más fácil, más fiable y simple para el vuelo FPV de largo alcance y porque su hecha por Arkbird, usted sabe que va a funcionar muy bien.

* Completo y fácil de seguir las instrucciones de instalación están disponibles para su descarga desde la pestaña de archivos.

caracteristicas:
• Sistema avanzado de salto de frecuencia FHSS
• Potencia de salida ajustable (100MW-1400mw)
• Modos de sintonizador y repetidores
• No se requiere soldadura, simplemente se conecta a su modelo y el transmisor
• Salida de servo de 10 canales
• Los rápidos enlace de radio de 20 ms
• Compatible con Arkbird piloto automático y OSD
• Compatible con todos los transmisores (a través de modos de afinación o repetidores)
• No se requieren conocimientos de programación necesarios, la unidad es plug and play
• La protección a prueba de fallos
• Incluye todo el hardware y las antenas necesarias para la operación


Especificaciones:
Dimensiones (Transmisor): 73 x 70 x 24 mm
Longitud de la antena (transmisor): 201mm
Peso: (transmisor con la antena): 116g
Dimensiones (receptor): 44 x 26 x 10.5mm
Longitud de la antena (Receptor): 155 mm
Peso (con la antena del receptor): 26g
Frecuencia: 433 MHz
Radio de salida: 100mW-1400mw
Potencia de entrada (del transmisor): 2-3S (7-12.6v)
Entrada de energía (Receptor): 2-3S (4-12v)
Pico de corriente (transmisor): 400 mA @ 12v
Pico de corriente (Receptor): 120 mA @ 5V
Rango: rango completo

incluye:
10 canales transmisor y la antena UHF
10 receptor y la antena UHF Canal
Todo el hardware necesario
cinta de aluminio para el aislamiento de interferencia de 2,4 GHz (para el uso en el modo de estación repetidora)

* Nota: Compruebe si la frecuencia de 433 MHz disponibles en su región de operación RC.



Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    421000003-0
  • Brand:
    N/A
  • Peso ( g)
    270.00
  • Longitud
    240.00
  • Ancho:
    50.00
  • Altura:
    100.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I achieved 20.15km but with hand made moxon antenna and again handmade dipole receiver antenna... With stock antennas it would be max 6km around.
Quality
Value
Overall
Quality
Value
Overall
I use mine on 2 m high tripod. We fly two FPV planes simultaneously and so far so good with the side by side operation (no interference with each other) during FPV "formation" flying. They both work as relay units from 2.4 GHz receivers. Using an aluminum foil roasting pan with a hole in it sandwiched between antenna base and top of unit to act as an antenna ground base and prevent any interference with the 2.4 GHz system. Range with Arkbird receiver on plane, with no foil X under it (as suggested in manual) is about 5 km. With foil X it is significantly more but I run out of video range before control range. Overall unit works as advertised, control is smooth with no discernible lag. I am happy with the cost vs quality of these units.
Quality
Value
Overall
Quality
Value
Overall
I bought and tested it many times. I can say that maksimum limit you can achieve with this product is 6.200mt. Never hope more then this.
Quality
Value
Overall
Quality
Value
Overall
I tasted it 5.500mt without any problem. RSSI was showing pcnt50 and the weather a little foggy. Also I supplied by 7.4V instead of 12V.
I guess its possible to achieve up to 10.000mt in good weather conditions and 12V supply.
Its very easy to set up but you have to discover it by yourself. There are almost no instructions.
I will attach a video soon to prevent people to be crazy while trying to find how to set it up.
Quality
Value
Overall
Quality
Value
Overall
Got he arkbird working in repeater mode on the turnigy 9x after 2 days of struggling.
The system is very simple and works very well but the instructions SUCK.

I have only flown out to 3,5 km without any problems( that is the max range of my video system.

If you cant get the system to bind, after the receiver is flashing fast, unplug the battery from the repeater and plug back in (reset the repeater) this will complete the bind process.
Quality
Value
Overall
Quality
Value
Overall
Got mine yesterday, just getting it set up. Instructions are of course poor. So, you should have an understanding of what you are doing. It appears to be a nice piece, the only reason I didnt give it a 5 on quality is, mine came with a couple bent pins. I had to take it apart and straighten them. Also, not enough room to actually plug in the wire loom, had to grind the case down some. Outside of that, it appears to be quite awsome.
Quality
Value
Overall
Quality
Value
Overall
test it the first time today with hitec aurora 9.
very important for hitec users.
you have to move the black wire in the transmitter connector to the third hole
( it's on the fourth one ) otherwise it will never work ( you will get no output from the transmitter).
I shall write more after flying.
ilan
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.