Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Kit de asalto helicóptero 450L Flybarless 3D

Generating Links

Kit de asalto helicóptero 450L Flybarless 3D

Precio:

Now save ahorra 0,00 € 0,00 €

108,75 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9155000263-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El kit de montaje 450L Asalto es consecuencia de la gama ya popular de Asalto 450 helicópteros. Cuenta con una gama de piezas mejorado y actualizado al no cambiar el functionalilty y la calidad que usted ha llegado a esperar de esta excelente gama de helicópteros. Aún más de los fantásticos piezas de mecanizado CNC de aluminio con muchos de ellos anodizado captura de un ojo verde.

Algunas de estas características mejoradas son como sigue:

• piñón helicoidal y el engranaje de accionamiento principal para la reducción de decantación y el desgaste
• tubo de cola más larga (385 mm), esto es 40 mm más largo que las versiones anteriores
• Mayor diámetro del rotor principal (aceptará un máximo de 360 ​​mm palas del rotor)
• Mayor diámetro de rotor de cola (67mm hojas de cola)
• bastidores laterales rediseñado y mejorado de carbono
• Cola está tubo de torsión impulsado para mejorar la respuesta de la cola
• Más piezas son mecanizadas por CNC en aluminio y menos están moldeados de nylon
• Mejora de la cabeza del rotor y el sistema de plato cíclico
• totalmente mecanizado CNC rotor de cola caja de cambios con engranajes cónicos de nylon
• Montaje de motor de aluminio mecanizado CNC
• bandeja de la batería de deslizamiento de liberación rápida

La lista sigue y son demasiado numerosos para mencionarlos aquí, pero hay uno más que es un poco diferente, el 450L tiene un mecanizado CNC servo de cola de montaje instalado entre los principales marcos bajo el cono de cola. Esta rigidez al marco en este punto y también da un buen enlace directo a la cola. También se ha hecho lo suficientemente grande como para llevar a los servos de la cola un poco más grandes y más fuertes que están en el mercado hoy en día.

Especificaciones:
Tipo: Paso colectivo Flybarless helicóptero 3D
Rotor principal Diámetro: 755mm
Diámetro del rotor de cola: 175mm
Engranaje principal: 130T
Piñón: 11T
Relación de engranajes principal: 11,82
Longitud: 765mm
Altura: 205 mm
Peso: 410 g (sólo el marco)

Incluido:
Asalto kit de montaje 450L
las palas del rotor de cola
caddie soporte de la hoja
ataduras de cables y hardware de montaje
piñón del motor helicoidal (11T)
manual de montaje

Necesario:
3 x Alto par de metal orientadas de mini servos (longitud máxima de 24 mm)
1 x de alta velocidad del rotor de cola servo (longitud máx 36.5mm)
sistema 1 x Flybarless
1 x 450 tamaño del motor sin escobillas helicóptero (1700 ~ 2100Kv)
1 x batería 2200mah 3S LiPoly
1 x 40 ~ 60amp ESC
1PR palas del rotor principal (máximo 335 mm)
1 x transmisor y receptor de 6 canales
1 x cargador de baterías 3S Lipoly

NOTA: Para obtener una lista completa de piezas de repuesto , haga clic aquí

  • Assault 450L Helicopter
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Rod | Comprador verificado

  • Overall
  • Quality
  • Value

Be careful!

Apr 06, 2018

I got mine for AU$70, so I can't complain to much. Most of the components are of reasonable quality. My advise would be to check EVERYTHING before you fly it. It comes pre-assembled, presumably by people who have no idea what they're doing. Loose bolts, jammed bearings, no grease, poor gear mesh... C'mon hobbyking, these should be kits, so people can be responsible for their own build. Anyone who risks flying this without rebuilding properly it is in serious danger...

Tim | Comprador verificado

  • Overall
  • Quality
  • Value

Very good for price

Mar 27, 2018

Very good kit and great price too, the parts are quality and flies well!
There are a couple of minor issues i had:
1. On mine the front torque tube gear needs shims to get rid of the vertical play otherwise gear is able to move away from the other gear and the tail stops turning, or the gears are stripped.. u can use 5x10x0.1mm or 6x12x0.1mm shims both will do the job
2. The tail sits low and same issue getting caught in even short grass and stripping torque tube gears again :D... solution is to buy the align 470l dominator skids - they will fit directly and they have a rake on them (shorter at front that at back) which points the node down slightly and lifts the tail off the ground by about 3-4cm. A definate improvement on the 450l
Overall would have no problems buying this again!

Antonino | Comprador verificado

  • Overall
  • Quality
  • Value

assault 450 l

Jan 06, 2017

ho appena ricevuto il kit spedizione puntuale imballo perfetto molte parti assemblate materiali di ottima qualità

michel | Comprador verificado

  • Overall
  • Quality
  • Value

Overall a good Heli.

Dec 03, 2016

Bought and build this Heli last week and overall a good Heli but has a few flaws.
One of its flaws is the quality of the aluminum. In my case it was in the swashplate and the anti rotation bracket.
In both cases the threads in the aluminum where completely gone after putting in the screws 2 times. In the case of the swashplate if i hadn't seen it a crash during the maiden was a sure thing.
But other than that it's a good Heli. Flying it with Rotorstar main blades and they don't disappoint me. Together with the turnigy s306g-hv servo's on swash and tail make it a well balanced setup. Only "brand" stuff I got on it are align esc ,motor and a beastX plus.
But a good Heli for a fair price only thing is getting used to the new battery tray system.

Memphis Eddy | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 12, 2016

Dont waste your $ on any other 450 kit. I did and just found this 450L is way way superior kit. Why? Canopy is FG. Frame is assembled and even the frame sharp edges are smooth. Shipping was 4 days and low cost. So 6s or 3s build is up to you. What a nice kit @ 1/3 the cost.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2016

Couldn't wish for better. It's fantastic value and quality.

LikarD | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2016

Have assembled it and have to say it is much better than older 450 PRO helis. Great improvement from GARTT production... The only "problem" that isn't realy a problem but a must do is mesh well all TT umbrella gaers with apropriate shims to make them fit well, but not too tight eather - like all gears in general... All the rest was OK, use threadloch everywhere and grease on thrust bearings main head grips and tail grips as well. Wil tell more after first few flights... Bye

Chris | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2015

Finally got this bird up in the air and after building it and flying I can say the quality is great. Everything fit together nicely. I always pull all the screws out of the preassembled parts and they were mostly thread locked so I probably would have been ok not doing this. flying was perfect, I didn't have to adjust anything after the 1st flight, everything was just spot on after setup on the bench. I used the ZYX - S2 and it held solid. This is a quite a difference from the HK kits on this site as I had to buy a lot of Align parts for the tail and a new swash as its quality was quite poor (RIP).

LeoTrex | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2015

il miglior elicottero classe 450 lavorazione perfetta piccolo neo viti un po deboli e alcune con testa torx

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 31, 2015

good I like it was abit battered by the post but all parts were ok

  1. 1
  2. 2
Archivos de clientes
CC3d Download [3551]
Manual Assault 450L Download [6038]
Manual Assault 450L Download [6038]
Satho Assault 450L 6S Setup Download [52]
Satho Assault 450L 6S Setup Download [48]
Satho Assault 450L 6S Setup Download [58]
Satho Assault 450L 6S Setup Download [59]
Satho Assault 450L 6S Setup Download [65]
WayToMountThrustBearings Download [133]
Manual Assault 450L Download [6038]
  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios