El CUPID610 es un canal de interior planeador dos ultra ligero. Equipado con la BA-K1 micro RX / ESC combinado y micro servo, su peso es un simple 60g.
Los principiantes les encantará este plano, así como aquellos que buscan algo un poco diferente.
Fusible Longitud: 610 mm
superficie de las alas: 11dm2
Ala de carga: <4,3 g / dm2
Peso total: 60g
Receptor: combo BA-K1 Micro Rx / ESC
Batería: 200mAh 7.4v
CUPIDO avión 610 RTF
Receptor / ESC / Servo / motor / hélice
paquete de 7.4V 200mAh Lipo.
Todo lo que necesita es un transmisor de 35Mhz y cristales (Tanto Rx / Tx)
**** Nota: Este es cero y STOCK DENT. NO garantía ofrecida
SKU (Número de Referencia):
Capacidad ( mAh )
Peso ( g)
- SKU (Número de Referencia):
One wing was broken but with a little glue it was fixed. Flies real relaxed. Picyure shows one servo for rudder, but came with rudder servo included. Main wing can be trimmed.I received a broken tail, but very promptly a spare tail has been sent to me.
The plane flies very well, only a minor adjustment was needed to reduce the negative angle of the motor.
The Cupid is extremely easy and turns in 1-2 meters, it flies very slow, it is very appropriate for small closed places. However outside is fun, with just a little wind you can over, or even fly backward, but always with nice control.
I really suggest this toy to those that wants something unusual, and those that like slow fly.
Can anyone suggest a 36mhz or 2.4gig replacement rx?The SlowFlyer I have got is even much better that in the description. Wow, it has 2 servos installed for rudder and elevator instead of one. The propellor is also light yellow-very nice. It flys very smooth with a bit gas and with full gas there are even loopings possible. Super-Thank you Hobbycity!
Here are 3 photos of the new Version:
3. http://item.slide.com/r/1/144/i/cokNK-Lt6D8-9R1K13vVXyX2VPabSgQO/Excelente, listo para montar. Ligerisimo para volar indoorThis model arrived in about a week to the UK and nothing was broken! However, near the end of the indoor session, the common fault where the tail boom snaps, did in fact snap. No problem..... to carry on flying, I gaffed it up with tape and cyano. A more permenant repair is to drill two x 1mm holes paralel to the tube into the fuselage body.... and glueing 1mm carbon rod inside. Then bind the rods to the boom and cyano it. the pane is now perfect. It did need a tail skid though, and once again, a 1mm pice of carbon.
The plane glides very well and slowly. I have tested it in a big gym and outside on a flat calm night. Just throttle up, and the plane gets in the air in about 1.5 metres. It is very easy to fly, So its a plane for indoor beginners! It won't quite loop, but will make tight turns and rapid ascents.
The model is in fact a version two, which has elevator now as well as rudder and throttle.
One last thing to note, the battery charge lead is not one I can lay my hands on. I cut off the plug and made myself one in line with other indoor model batteries.Great little indoor floater. Plenty of control and a surprisingly long flyte on such a small battery. I eventualy converted mine to a 2.4 gig radio system and found the BEC overheated so I had to change the ESC as well. I am very happy with the planeEin super Flieger macht in der Halle riesig Spa kann mann nur empfheln.
I recived the Flyer today after 4 weeks
after the order placment ,looks nice ,within 45 min everything was ready to fly you need a mini crystal 35 Mhz to make it ready.
Flyes very slow,a little more power would be helpful (maybe I will try a different Propeller,less pitch . For outside use you need almost no wind condition!!!
It is a great buy for the moneyThe Flyer arrived in just eight days and nothing was broken! I was very surprised, because the plane glides very well and slowly. I have tested it in a big gym: Just pull the engine forward, the plane gets in the air. It is very easy to fly! So its a plane for beginners! But if you want to make a turn, the modell wants to go to the ground. It is because, you have just one rudder. It works to make a turn and it is nice to fly, but I have built in an another servo. This was no Problem. And now Im very happy. Try it!! Even the price is less than you have bought it in europe!
Der Flieger erreichte mich in nur acht Tagen und Nichts war zerbrochen. Ich war sehr berrascht darber, dass das Modell in einer groen Turnhalle nur durch die Bettigung des Gashebels zugleich in die Luft aufstieg. Das Ding fliegt schn langsam und ist deshalb schon etwas fr Anfnger. In Kurven singt das Modell schon mal Richtung Boden, da nur ber "Seite" gesteuert wird. Ich habe einfach ein zweites Servo fr "Hhe" eingebaut.
Insgesamt ist der Preis, trotz des Versand, immer noch toll!