Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

BMS-2514 sin núcleo digital de la aleación del engranaje servo - 33.2kg / 0.13s / 7.4V (Alta Tensión)

BMS-2514 sin núcleo digital de la aleación del engranaje servo - 33.2kg / 0.1...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
160 g
SKU:
BMS-2514

Combine

essential items and
acc
Descripción
del

El BMS-2514 es un alto voltaje (7.4V) sin núcleo Servo digital con engranajes de titanio y un disipador de calor de aluminio caso. El BMS-2514 incluye un conjunto servo de alta resistencia.

Especificación:
Peso: 69 gramos
Dimensiones: 40,5 x 20 x 39 mm
Torque @ 6V: 27,1 kg / cm
Torque @ 7.4V: 33,2 kg / cm
Velocidad @ 6V: 0.16sec / 60 grados sin carga
@ 7.4V Velocidad: 0.13sec / 60 grados sin carga

caracteristicas:
Caso del disipador de calor de aluminio
engranaje de titanio
Motor sin núcleo
Servo digital
Doble cojinete de bolas
conector de tipo JR
Compatible con 2s Lipo (7.4v), de 6 celdas de NiMH y 2 A123 de células (6,6 V).

El El BMS-2514 es servo de alto rendimiento fabricado en Taiwán y se recomienda para todas las aplicaciones.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    BMS-2514
  • Brand:
    N/A
  • Peso ( g)
    160.00
  • Longitud
    66.00
  • Ancho:
    11.00
  • Altura:
    33.00
  • Velocidad ( Sec / 60 grados )
    0.13
  • Par ( kg ) ( min . 0,01 kg )
    33.20
  • Unit Weight (g):
    71
  • A ( mm ):
    43.00
  • B ( mm )
    40.00
  • C ( mm )
    38.00
  • D ( mm ):
    20.00
  • E ( mm ):
    54.00
  • F ( mm )
    28.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Its no titanim gear . Power gear broke - It is aluminim or other soft material. I crash 2,2m model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This servo are dead after 6 onths on my little axial scx10.

Pinion hs...not good quality like savor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
.

.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
servo de muy buenas cualidades , se puede conectar a 7,4 v , espero que me cumpla con lo descrito en las especificaciones

montado en mi Gmade R1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok guys I ordered over 8 pcs of these servos for testing purposes and to install in my planes. All 8 were tested under extreme pull stress starting from 12kg/cm to 19.5kg/cm at 7.4V. The servos easily reach 16.4kg/cm without any problems. The issues begin after 20kg/cm, some of the servos began to buzz and not operate properly. They vibrated and did not move smoothly.



I tested electronics and all was well-made. The gears are good and smooth. Overall, the quality of these servos are okay for those who only need 18kg/cm performance, not more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fast and powerful. Accurate, a bit more noise than my hitecs. But great quality at a better price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awesome servo, very strong, I replaced a hitec 7950 with this its a hair weaker, i'd compare it to a hitec 7955, so far i'm very happy. it is power hungry, I had a HK3a UBEC and it would overdraw it and the RX would lose bind, I have that BEC with a reciever capacitor and it works fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a very strong and accurate servo.

I've installed it in my traxxas 1/10 summit instead of 2 pre-installed traxxas 2075 servos.

I'm very happy with this servo!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.