Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Boeing P-26A Peashooter EPO 800 mm (PNF)

Boeing P-26A Peashooter EPO 800 mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2612 g
SKU:
P26A-PNP

Combine

essential items and
battery
acc
Descripción
del

El Boeing P-26 fue el primer avión de combate producción de todos los metales de América y fue el primer monoplano de búsqueda utilizado por el Cuerpo Aéreo del Ejército de los Estados Unidos. Diseñado y construido por Boeing, el prototipo voló por primera vez en 1932 y se convirtió en uno de los combatientes de primera línea utilizados por el USAAC entre 1933 - 1938. Cabe destacar que el P-26A estaba todavía en uso con el cuerpo de aire del ejército de Estados Unidos en fecha tan tardía como 1941 en las Filipinas.

El diminutivo "Peashooter" - como se hizo conocido cariñosamente por los pilotos de servicio, era más rápido que los aviones de combate estadounidense anterior con una velocidad máxima de 203 nudos. El diseño anacronismo con alas con cables tensores, tren de aterrizaje fijo y cabina abierta representaban un marcado contraste con los combatientes europeos de la época.

entusiastas escala disfrutarán de los cables del aparejo de acero inoxidable, magníficamente detalle Pratt & Whitney motor simulado, líneas de panel y la cabina escala, mientras que los colores brillantes representan fielmente los esquemas de la pintura USAAC de la época. El fuselaje está construido a partir de espuma EPO durable y ofrece un gran rendimiento de vuelo para un modelo de su tamaño. Tiempo de forma- se mantiene al mínimo con funciones inteligentes tales como un tornillo en el ala y la cola. Con los servos, ESC y el motor de todo ser instalados por la fábrica, todo lo que necesita hacer es instalar su propio receptor y la batería para tener su Peashooter en el aire en ningún momento. Los cables del aparejo de escala son fácilmente extraíbles para su transporte y hay un montón de potencia desde el motor outrunner pre-equipada. acrobacias aéreas clásicos como puesto de vueltas y rollos barril son un pitido, sin embargo, la P26A es igual de feliz que vuela a la velocidad de escala.

caracteristicas:
Alto nivel de detalle escala incluyendo el motor radial simulado
Super resistente construcción EPO
Plug and Fly, sólo tiene que añadir su propio RX y Lipoly!
Asamblea fácil y rápida
Excelente acabado de pintura antes de la guerra con la experta Aplicadas Tobogán Adhesivos
Aparejo alambre incluido
Fácil acceso a la portilla de la batería
Bajo Tough-carro con el diámetro grande, ruedas estrechas, ideal para las tiras de hierba
Perno de montaje de cola
2 x Puntales Incluido

Especificaciones:
Span: 800mm
Longitud: 682mm
Peso: 600 g
Motor: Outrunner 1200KV
ESC: 20 w / BEC
Servo: 9g x 4

Se requiere:
4 Channel Radio
1300mah 3S Lipo
Cargador de batería

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    P26A-PNP
  • Brand:
    No
  • Capacidad ( mAh )
    No
  • Peso ( g)
    2612.00
  • Longitud:
    855.00
  • Ancho:
    155.00
  • Altura
    335.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wow. Had the maiden flight today, totally awesome. Now that the emotions are cleared time for facts. She has ample speed performance. If anyone wants more I wouldn't understand why. Takeoffs are predictable IF you have done your homework. The tail wheel must be set correctly, check the centering. Full up elevator must be applied in the initial taxi run to reach a point where you have good airflow over the fuse. Gentle pressure off the elevator will reward you with a very controllable rotation and you will notice that it is airborne on about 1/2 throttle. Gentle application of the up elevator will see it rapidly gaining height. Now the fun begins. It flies where you put it. Ailerons are very effective and rolls happen in the blink of an eye. It will not forgive pilot error or bad flying. Loops are huge, Immelmans intersting, chandelles exciting, high speed passes exhilerating. Now, it is probably nose heavy. Go 53 mm back from L.E. First landing saw me run out of elevator authority requiring it to be flown onto the ground as it didn't want to flare. For settings use differential on the ailerons with no more than 8 mm up and 5 mm down. Elevator 15 mm up and down rudder 25 mm both ways. If you use expo 30pcnt works for me. I fly tight sticks so these settings suit my style. This plane is energetic, looks great. You could almost do 3D but why would you? Fly it as it is meant and y
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just a few pointers that might help modelers in setting up their plane. Be very careful that you check the orientation of your control surfaces. Most servos are set to rotate cw when rudder, aileron turn right and elevator goes up. Because everything is designed for rapid assembly the focus is on quick not on correct. Also, aileron servos are not set up for differential operation where there should be more up than down. Too much down gives adverse yaw. Using ailerons is about reducing lift not increasing drag. Too much down aileron is like having a flap on one side;not good.
Modern radios like the excellent Turnigy have a plethora of functions that are often used for compensating for poor installation practice. Get all of this right and you will have an excellent flying aircraft. This plane is just so right in the air you will love it. Buy one!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am biased but have always had a weakness for Golden Age aircraft and tthe P26 is way up there on the desire scale. Have read a few articles and reviews about this bird and I have raised the odd eyebrow or two. One point in question is the wheels being in backwards, well, try orientating them first! Tail wheel was not eccentric at all, the rubber tyre just needed massaging into round. Model went together well although tight especially for the battery and esc. Rigging was fun and the springs such a good idea. Wheel spat mounting screws were difficult to set up but all the rest was fine. Tail wheel needed some adjustment to centre properly but that was only 2 turns on the clevis. Paint has not adhered well to all parts of the plane but it is a buzz to weather the plane with some acrylic. It is such a plane with character, you just have to get one! Flying review soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my P-26 and am quite disappointed in the packaging. There are several areas on the body and wings where the paint has been rubbed off due to poor packaging. Such a shame as it is truly a pretty paint scheme. I am rating it low only because of all the marks from the packaging. I will do a review on assembly and flight later.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der HAMMER!!!!
Wie echt, der Zusammenbau in krzester Zeit, kein Klebstoff ntig.
Sehr starkes Fahrwerk, das sitzt tief und gut.
Holger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The paint flaked off the parts straight from the box. The foam seemed brittle. The wiring for the external braces were no fun to install. I thought for sure this little thing might last one take-off and if lucky some kind of fixable landing or two.

With all that said it is has stood up quiet nicely and is a lot of fun to fly. Great size for transport and looks good on the shelf. If you get it please take the time to wire it properly. Not easy to fly but very rewarding.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my first product from HobbyKing, and I'd say my experience with it is a mixed bag

THE GOOD STUFF: HK is to be commended for bringing so many relatively little known aircraft to market. Their P-26 is a really attractive and unique aircraft, and for the price you're paying, this kit is a solid value. Some reviews elsewhere (RC Groups.com) have questioned whether the stock motor has enough power. I would say it does in spades! On the maiden flight, I handlaunched it at full power and it fairly leaped from my hand, and was up to a safe altitude for trimming in no time flat!

THE NOT SO GREAT: While the over structure of the aircraft and the quality of the included electronics are just fine, the documentation leaves a lot to be desired. One thing they don't address is how to put the vertical stabilizer/elevator in the too-small slot in the back. There is a 'cone' at the back of the stab that you either have to cut off so it will fit in the slot, or cut material out of the back of the slot opening on the fuselage so the whole assembly will fit. I opted for the former. Not a big deal, but for someone whose experience up to this point has been with Parkzone kits, I was a little surprised to see this not thought through, addressed, or mentioned.

Another maddening issue is paint quality. While the foam itself is fine, the paint, particularly the blue of the fuselage, f
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this plane after reading about how nice it flies. However, I was extremely disappointed with a number of things. First, the paint rubbed off very easily. I had blue and yellow fingers from just handling it while putting it together. Next, issue had to do with installing the flying wires. I had an extremely hard time crippling the metal crimps. Finally, on its first flight the ESC gave out and the plane crashed.

Recommend, to anyone purchasing this model to coat the plane with some some type of clear paint and replace the ESC.

Also, Hobbyking needs to supply parts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very charismatic aeroplane, almost Disney cartoonish. The paintwork lets go a bit, but contributes to that "worn" look. The pilot is great, complete with legs, and with a resigned bemused look on his face. Take-off is good on rough grass, with those large narrow wheels. Speed is required to maintain height, which makes for a rather lively performance; a bit skittish in any wind above 10mph. I put 20mg of lead in the battery cover. Landings are good; as the speed drops off, it slows to a stable landing with no tip stall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just picked this model up from US warehouse and all I can say is WOW! A stunningly beautiful model airplane dripping with scale detail. Paint and decals are superb. Can't wait to build and get in the air. Well packaged. Great job HK!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Boeing P-26A Peashooter EPO 800mm

  • HK P26A Peashooter

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.