Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

C05XL Micro sin escobillas 10800kv outrunner

C05XL Micro sin escobillas 10800kv outrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
23 g
SKU:
C05XL-10800
Descripción
del
C05XL Micro sin escobillas 10800kv outrunner

Especificación:
Peso: 6,8 g
KV: 10800rpm / v
Tamaño: 24 x 13,9 mm
Corriente máxima: 4A / 40W
Actual: 4.2V / 0.82A (sin carga)
Eje: 1.5mm
Longitud del eje: 7mm
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    C05XL-10800
  • Brand:
    No
  • Peso ( g)
    23.00
  • Longitud
    70.00
  • Ancho:
    14.00
  • Altura:
    50.00
  • Kv (rpm / v)
    10800.00
  • Unit Weight (g)
    6.8
  • Corrientes max (A):
    4.00
  • Resistencia ( MH ):
    0.00
  • Max Voltaje ( V )
    4.00
  • Potencia ( W )
    40.00
  • Un eje ( mm ):
    2.00
  • B Longitud ( mm ):
    15.00
  • C Diámetro ( mm )
    14.00
  • Puede longitud D ( mm )
    9.00
  • Longitud Total E ( mm ):
    22.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor I use it on my walkera 4#6S , replaced the old inrunner motor.Now I could see the flight difference ,longer flight time and good headspeed match it with 15 or 16 pinion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good head speed with a 9 tooth but not much power. I would start with 8 tooth. Not sure if its the motor or the speedo but have to hand start this with hk 7a speedo w/convertor. Runs well once started.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice little critter. HK got the specs WRONG, the shaft diameter is 1,5mm, not 2mm!! Runs well on my v120d02 as a drop-in replacement with a 15T Pinion. Make sure that you use 1mm spacers when using the original motor screws, otherwise they will block. Has even a little more grip with 17T Pinion but then you get over one minute less flight time than with 15T.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
its been getting a lot of reviews so i order 1 , ill follow up on the result once i get it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You gotta have this one for your 4G3, 4G6 or V120xxx! Use mine with a 18 teeth pinion on 600mAh15C lipo's on a 4G3. Better than HP06, makes it feel powerful. About 6-7 minutes of fast flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. I use it in a Walkera V120D01 with the stock ESC and it makes the heli so much more alive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100. You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100.
You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Once installed on the 4 # 6S with 20T pinion it into a beast ..... When you first start ended on the ceiling, with broken rotor. :-(... Engine seems fine, does not heat as the original. Time will tell how durable it is.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i just got one on the last day. It 's aweesome motor when I put it on wk HM 4#6 with 16 T pinion and stick ESC. I like it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.