Dimension23mm x 24mm
WeightF25.5g 0,89 oz (kv2050) (sin incluir conectores)
Diámetro de shaftF3.0mm (EDF / EDP)
Longitud del frente shaftF8mm
El rendimiento máximo;
Objeto: 7035 (GWS)
SKU (Número de Referencia):
Peso ( g)
Kv (rpm / v)
Corrientes max (A)
Potencia ( W ):
B Longitud ( mm ):
Puede longitud D ( mm )
Max Voltaje ( V )
Un eje ( mm ):
Unit Weight (g):
C Diámetro ( mm )
Longitud Total E ( mm )
Resistencia ( MH ):
- SKU (Número de Referencia):
Gteat litlle motor work very fast for his size 2050 kv :-) great valuei ordered 4 and use it for mini fpv racing quad, and it work fine,only issue is vibration hope hobbyking can have more calibration on this motor
https://www.youtube.com/watch?v=ugVWe4anWtwI run this with a 3 cell 1000 mah battery and "AFRO" 12 amp esc using an APC 6x 4 and it takes my Graupner Terry pretty much straight up. I bought the ESC as a back up and ideally it would have a brake programmable ESC, but it runs this motor very well otherwise right out of the box.
I have the Delta Rocket plane too. This would be a good motor and ESC for that too on 3 cells with the 6 x 4 APC.
I put an APC 6-4 on this and with an AFRO 12 ESC I flew a Graupner Terry with great authority on 3 cell 1300 Nanotech and yellow HK battery.
I did not use the wooden mount. I curt down an aluminum mount from another motor to an I mount instead of an X mount (I cut off two of the four tabs).
Motor hauls the plane, which probably weighs 20 OZ with reinforcing and iron on covering, almost straight up!
Seems very smooth and powerful for 1 oz. motor. Seems to stay cool (it's stuck on a firewall on the nose in full airflow.
This would make a good motor for a 1 lb. pusher jet on 3 cells, like the Delta Jet Rocket*
*I do not know what Hobby King calls this, I have a Vin Quan Delta Rocket from another vendor.
I cannot comment on durability yet, only a couple flights so far.Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringi use this motor for my mini skywalker with a 6x4 apc prop..using 3s battery has plenty of power and runs smoothly..recommendedHabe den Motor auf einem Magnum von EPP-Shape mit SF 8-3,8 an 2S zieht 10 Amp.geht superThis C20 brushless Outrunner 2050kv is very good use for small 3D plane. I had purchase few of this motor for my own make plane. It good to use 2cell battery 1000mAh.Nice little motor. I use it a Wing Wing Z-84 with 850mA 3s and a 5x5 prop.
It works great in this setup, pulls around about 10A.
I would not recomand to take bigger probs, in my test a 6x4 prop already draw 13A and the motor got very warm. With a 5x5 prop I had not temperature problems.otimo motor preo beneficio