Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

Hélice de madera de cerezo 20x10 (1 unidad)

Hélice de madera de cerezo 20x10 (1 unidad)

QTY:

Now save guardar 0,00 € 0,00 €

9,12 €
Stock:
Peso:
159 g
SKU:
LY90520-20x10

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

El peso ligero pero resistente madera de cerezo es maravillosamente hecho a mano y laminado.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    LY90520-20x10
  • Brand:
    N/A
  • Peso ( g)
    159.00
  • Longitud
    505.00
  • Ancho:
    21.00
  • Altura:
    50.00
  • Y de paso ( pulgadas )
    10.00
  • Material
    Wooden
  • Rotación:
    CCW
  • Unit Weight (g):
    N/A
  • Tipo
    Normal
  • Contador de la cuchilla
    2
  • Diámetro X ( pulgadas ):
    20.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Hatte den Prop. an einem OS FT 300. Vor dem zweiten Flug, zum Glck noch am Boden zersprang der Prop. bei einem Gas stoss! Wenn ich die Bewertungen da sehe, scheint dies aber ein Einzelfall zu sein. Seit bitte zrozdem vorsichtig beim Motoreneinstellen mit diesem Propeller.
Quality
Value
Overall
Quality
Value
Overall
HELICE DE PRIMEIRA, MUITO BOA
Quality
Value
Overall
Quality
Value
Overall
Just received 2 of these. After enlarging the center hole (it was 9 mm instead of 10) and drilling the other 4 for a DL50, props weight 95 and 97 gr. Considered as light, compared to others. Slightly out of balance, but easily balanced. Stiffer than Master Airscrew, but not as stiff as XOAR or Menz (wooden of course). But Menz and XOAR are heavier as well. Bottom line, for $10, they really worth their price.
Quality
Value
Overall
Quality
Value
Overall
I bought these hoping they would be OK at the price. I drilled out the mounting holes to suit my DL-50, Balanced them, and went flying. I was amazed at how well the aircraft performed. They pulled like crazy and verticals to out of site from take off were easy. They also provide good breaking on vertical downlines. My RPM increased to 7200 from 6600. They are a little noisier than my previous brand but good throttle management controls that.
Quality
Value
Overall
Quality
Value
Overall
Tres belle helice. semble bien faite . pas de defaut apparent. on doit la perc un peu poue qu elle entre sur le shaft d'un 50cc
Quality
Value
Overall
Quality
Value
Overall
They look excelent. I have not tested yet
Quality
Value
Overall
Quality
Value
Overall
Nice glossy finish, beautiful wood. Has some minor imperfections (dust, I believe). Hole diameter is 9mm, thickness is 16mm.
Quality
Value
Overall
Quality
Value
Overall
Great prop! Took a little spray paint on one tip to balance perfectly. Used on a Fuji 50cc gasser mounted on a Great Planes 1/3 Pitts Special. It ran beautifully on the first flight. It also probably saved the crankshaft, as I landed it some long grass and flipped the plane. Broke the prop, but it took the brunt of the crash. The only issue I had with the prop is that the mounting hole is too big, even for a 50cc engine. Wish they had more!
Quality
Value
Overall
Quality
Value
Overall
Nice finish wood propell.

You can not find this propeller for this price in any other place.
Quality
Value
Overall
Quality
Value
Overall
very good finaly and very resistent.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.