CNC actualización de metal para la abeja de miel esky King3

• Overall
• Quality
• Value

Customer Rated

Jan 18, 2013

I never recieved all the items in the picture. The tail rotor axle was missing, as was the hillier assembly. I think that's what it's called. It is the part in the bottom row, 2nd in from the left. also tail rotor mount was very poor and would not clamp onto the tail boom. I had to drill a small hole and put in a screw to stop it from turning. In the end I reinstalled the entire plastic tail assembly.

• Overall
• Quality
• Value

Customer Rated

Dec 05, 2012

I got this for my HBK3 everything fitted fine, exept the tail axel holder part, ( i dont know its name). The problem is that the tail axel holder part is a bit longer. but it is only 2-3mm so after useing some sand paper it all went together perfectly. The tail axel holder thing, also doesnt have a schrew witch goes through the center of the tail boom but a clamp instead, but this workes fine to. So all in all it is a great part and it is a lot better then the plastik parts. But be warned there is no manual inkluded, so keep the old plastic one and asemble it, useing the old one as the manual.

• Overall
• Quality
• Value

Customer Rated

Feb 24, 2012

ok kaliteli bir iilik.tavsiye ederim.Fakat olas krmlarda hasar oran daha fazla olacaktr.

• Overall
• Quality
• Value

Customer Rated

Oct 06, 2011

Got this from the other place a year ago. Flown King3 and BeltCP (the head is identical, the only difference is tail holder) for a few hours with it. It's an ok head, stabilizer arms got floppy after some time so did some other joints. Some ball connections develop play where they are screwed into the metal parts. It survives crashes pretty well because balls break off before something can bend. I like original nylon head more although this one moves easier and with less friction. It's also very light. I'd suggest adapting HK450 head instead - way more solid although might be heavy for King3.