New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

(Terminado) Sbach 342 30cc Gas 1900mm (ARF)

(Terminado) Sbach 342 30cc Gas 1900mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Peso:
7680 g
SKU:
Sbach342_3035
WANT FREE SHIPPING? Click here to find out more!

El Sbach 342 ha sido nada menos que una sensación desde su llegada a la escena de acrobacia aérea, Philip Steinbachs masterpeice logra combinar líneas agresivas aunque elegante con una mirada moderna, que ha capturado la imaginación de los entusiastas de la aviación de todo el mundo. El rendimiento es, por supuesto, lo de corte de bordes aviones acrobáticos están a punto, y es irónico que el Sbach 342 fue diseñado específicamente para imitar el modelo 3D capacidad de la aeronave.

El Hobbyking Sbach 342 es un espectador, no hay duda al respecto y cuanto más nos fijamos en los detalles más el factor "wow" de este modelo realmente golpea a casa. El tamaño de las superficies de control de agarrar su atención de inmediato, esto se construyó para acrobacia 3D / de precisión, a continuación, mira el hardware, las varillas de empuje torniquete con una bola de enlaces, cuernos compuestos, extensiones de cuerno de aleación de servo, tire / tire del timón, etc. , todos confirman la impresión inicial. El increíble, la construcción de ultra alta calidad proporciona el stength combinado con la luz-peso, otra caja de acrobacia aérea de precisión esencial tictac!

Este modelo ha sido pensado magníficamente y diseñado, otras características dignas de mención son el compuesto / tela de tren de aterrizaje de montaje, CF tren de aterrizaje, soporte de rueda de cola y el tubo estabilizador horizontal, capucha magníficamente en punta, el tubo de ala de fibra de carbono, el dosel asegurada por una tornillos y los imanes, opción para un silenciador afinado que incluye soportes silenciador y así sucesivamente, la Hobbyking Sbach 342 es impresionante combinación de detalle escala, mano de obra de alta calidad, componentes de alta calidad y rendimiento fuera y hacia fuera.

Especificaciones:
Envergadura: 1900mm
Longitud: 1850mm
Ala Área: 69 dm2
Peso del vuelo: 5400G ~ 5700g
4 canales

incluye:
Todo Hardware
Las instrucciones completas de Foto y CD Rom

Se requiere:
Su propia 6 Canal TX / RX
6 x tamaño estándar Servo MG High Torque Digital
30cc motor de gas 40cc ~
batería RX
UBEC / regulador
Spinner 75mm

  • SKU (Número de Referencia) Sbach342_3035
  • Brand -
  • Capacidad ( mAh ) -
  • Peso ( g) 7680.00
  • Longitud 1390.00
  • Ancho 290.00
  • Altura 530.00
  • Sbach 342 22m
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I maidened my Sbach today. First impressions with the build were very good. I liked the quality of the hardware, and the model was light and seemed to be well thought out. HOWEVER, I very nearly lost it on the first flight with full flutter of the tailplane! I was not flying it fast or hard, and it was during a power off, split S that the flutter occured. By the time I got it back on the ground, total flight time would have been less than four minutes, and inspection revealed all the fuselage formers shattered aft of the wing..... I'm going to repair and beef it up, but I'm disappointed that I should need to. I'm running an OS 1.6FX, which has very little vibration when compared to ANY gasser, so I'm shocked with the event. Other than that, the model flew very well and I'd have been well pleased if it had not fluttered.

I wouldn't recommend this model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I maidened my Sbach today. First impressions with the build were very good. I liked the quality of the hardware, and the model was light and seemed to be well thought out. HOWEVER, I very nearly lost it on the first flight with full flutter of the tailplane! I was not flying it fast or hard, and it was during a power off, split S that the flutter occured. By the time I got it back on the ground, total flight time would have been less than four minutes, and inspection revealed all the fuselage formers shattered aft of the wing..... I'm going to repair and beef it up, but I'm disappointed that I should need to. I'm running an OS 1.6FX, which has very little vibration when compared to ANY gasser, so I'm shocked with the event. Other than that, the model flew very well and I'd have been well pleased if it had not fluttered.

I wouldn't recommend this model.

WE HAVE BUILT AND HAD THREE FLIGHTS WITH OURS AND ARE VERY IMPRESSED .WE TOO RUN A DLE 30 AND MY SON 3D IT WITH NO WORRIES.WE USED THE SUPPLIED HARDWARE AND HAVE NOT HAD A PROBLEM.TOP VALUE FOR MONEY AND AM LOOKING AT THE YAK 55 NOW AS WELL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WE HAVE BUILT AND HAD THREE FLIGHTS WITH OURS AND ARE VERY IMPRESSED .WE TOO RUN A DLE 30 AND MY SON 3D IT WITH NO WORRIES.WE USED THE SUPPLIED HARDWARE AND HAVE NOT HAD A PROBLEM.TOP VALUE FOR MONEY AND AM LOOKING AT THE YAK 55 NOW AS WELL

Well I finally finished this plane and i am very impressed with the quality.

I used all hardware except the hinges and pull pull cable for the rudder that came with the plane. I replaced the hinges with Pivot & Round Hinges 4.5x67mm. I replaced the cable with 27kg cable and cremps from BCF. I used a DLE 30cc engine with a 20x8 prop and had to make a plan for the standoff as the room between the firewall and cowling was very short. 30cc is more than enough for this plane to 3D.

See files for pictures and I will add a movi later.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well I finally finished this plane and i am very impressed with the quality.

I used all hardware except the hinges and pull pull cable for the rudder that came with the plane. I replaced the hinges with Pivot & Round Hinges 4.5x67mm. I replaced the cable with 27kg cable and cremps from BCF. I used a DLE 30cc engine with a 20x8 prop and had to make a plan for the standoff as the room between the firewall and cowling was very short. 30cc is more than enough for this plane to 3D.

See files for pictures and I will add a movi later.

Customer files
Sbach Manual Download [1452]
Dry fitted Download [3015]
CDI Ignition Download [2229]
sbach342 35 cc Download [189]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!