New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

4,6 kg Corona CS238MG Metal Gear Servo / 0.14sec / 22g

4,6 kg Corona CS238MG Metal Gear Servo / 0.14sec / 22g

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

6,38 €
Estado:
En stock
SKU:
CS238MG
WANT FREE SHIPPING? Click here to find out more!

4,6 kg Corona CS238MG Metal Gear Servo / 0.14sec / 22g

Modelo: CS238MG
Voltaje de funcionamiento: 4.8V / 6.0V
Corriente de funcionamiento: 300mA / 400mA
Velocidad de funcionamiento: 0.15sec.60º / 0.14sec.60º
Puesto par: 4kg.cm / 4.6kg.cm
Tamaño: 29X13X30mm
Peso: 22g
Banda muerta: ≤5uSec
Viaje de funcionamiento: 40º / un pulso lado 400US viajar
Potenciómetro: 3 deslizador / Direct Drive
Cojinete de bolas: MR106
Engranaje: Metal
Alambre de conector: 215mm
Temperatura de funcionamiento: -20C + 60C

  • SKU (Número de Referencia) CS238MG
  • Brand Corona
  • Peso 45.0000
  • Longitud 76.00
  • Ancho 32.00
  • Altura 51.00
  • Par ( kg ) ( min . 0,01 kg ) 22.00
  • Velocidad ( Sec / 60 grados ) 0.14
  • A ( mm ) 35.00
  • B ( mm ) 30.00
  • C ( mm ) 31.00
  • D ( mm ) 13.00
  • E ( mm ) 41.00
  • F ( mm ) 19.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have old serwo SC238MG with the red inscription Corona. It has well-fitting T-bar lift well. New with the orange inscription are loose. This is not the problem, some tape and it is well. New serwa work so as old, well. ( I always unscrew the casing and check the solder).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have old serwo SC238MG with the red inscription Corona. It has well-fitting T-bar lift well. New with the orange inscription are loose. This is not the problem, some tape and it is well. New serwa work so as old, well. ( I always unscrew the casing and check the solder).

Smooth, not too noisy, centre OK. The horns, while not being a tight fit on the output shaft are OK once the screw is installed and tightened.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth, not too noisy, centre OK. The horns, while not being a tight fit on the output shaft are OK once the screw is installed and tightened.

Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.
Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.Upon testing, the Y2 output transistors are burning out. Why is this? This is very bad.

Bought some to replace the stock (plastic geared) rudder servo in the Dynam Pitts Python. It is a direct fit into the slot for the Pitts.
I am really happy with the quality of these Corona servo. Smooth and quiet. Really nice set of mounting accessories come included that allow you to mount vertically or horizontally.
I'll be getting more for any of the bigger jobs.
Cheers Michael

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought some to replace the stock (plastic geared) rudder servo in the Dynam Pitts Python. It is a direct fit into the slot for the Pitts.
I am really happy with the quality of these Corona servo. Smooth and quiet. Really nice set of mounting accessories come included that allow you to mount vertically or horizontally.
I'll be getting more for any of the bigger jobs.
Cheers Michael

Gute stellgenaue servos und fr den Preis absolut zu empfehlen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gute stellgenaue servos und fr den Preis absolut zu empfehlen.

Bought 8 of these servos. On all the horns fits very poorly on the splined shaft and even after screwing them on tightly, there is a big play. I fixed mine by using teflon tape. See the attached file how to do this and now the horns fits vey nicely. It is otherwise a great servo with very high torque for it small size. The gear train has a lot of gears. See the attached file so how can Corona equip them with such poor horns. Its a mystery. I give only 2 crowns because of this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 8 of these servos. On all the horns fits very poorly on the splined shaft and even after screwing them on tightly, there is a big play. I fixed mine by using teflon tape. See the attached file how to do this and now the horns fits vey nicely. It is otherwise a great servo with very high torque for it small size. The gear train has a lot of gears. See the attached file so how can Corona equip them with such poor horns. Its a mystery. I give only 2 crowns because of this.

Got 4 of these. I only need 2!! Not soak tested as yet, but I agree that the horns are not a fantastic fit on the gear. I will update once fully tested.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got 4 of these. I only need 2!! Not soak tested as yet, but I agree that the horns are not a fantastic fit on the gear. I will update once fully tested.

I used it for a sweep wing mech on a f-14 shumate depron and it works great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used it for a sweep wing mech on a f-14 shumate depron and it works great!

Very nice mini servo and good torque and speed for the size. Build quality is fine for the price and so far its been great. Overall very nice servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice mini servo and good torque and speed for the size. Build quality is fine for the price and so far its been great. Overall very nice servo.

exelent for the price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

exelent for the price!

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
How to fix the poor fit of the horns Download [596]
Servo_corona_fix.pdf Download [630]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!