- Descripción
del -
5.1kg Corona DS339HV metal Digital Gear Servo / 0.13sec / 32g
Modelo: DS339HV
Voltaje de funcionamiento: 6.0V / 7.4V
Corriente de funcionamiento: 320mA / 420mA
Velocidad de funcionamiento: 0.14sec.60º / 0.13sec.60º
Puesto par: 4.5kg.cm / 5.1kg.cm
Tamaño: 32.5X17X34.5mm
Peso: 32g
Banda muerta: ≤3uSec
Viaje de funcionamiento: 40º / un pulso lado 400US viajar
Potenciómetro: 5 deslizador / Direct Drive
Cojinete de bolas: MR106
Engranaje: Metal
Alambre de conector: 300mm
Temperatura de funcionamiento: -20C + 60C - Product
Specifications -
Información adicional
-
SKU (Número de Referencia):
014000004
-
Brand:
Corona
-
Peso ( g)
57.00
-
Longitud
76.00
-
Ancho:
32.00
-
Altura:
51.00
-
Velocidad ( Sec / 60 grados )
0.13
-
Par ( kg ) ( min . 0,01 kg )
5.10
-
Unit Weight (g):
No
-
A ( mm ):
40.00
-
B ( mm )
33.00
-
C ( mm )
34.00
-
D ( mm ):
19.00
-
E ( mm ):
44.00
-
F ( mm )
24.00
-
SKU (Número de Referencia):
- Community
Discussions -
- Rate&
Review -
kleiner als ein std. servo, ansonsten gutes ding.I have some of them already in use. Good, smooth running servo with good centering. Recommended product for all that need midsize due to low space.Purchased and received four of these servos with the intention of using them in an EF1 Pylon plane (similar to the Invictus sold here). Bench tested and found all four to function properly with ESC BEC set to output 7V. Servos seem fast, seem to have good resolution, have plenty of torque to work against opposing forces, seem to center well and don't buzz when at a neutral position and an opposing force is applied.
I've not installed or flown with them yet but will update the review once I have. For the moment these seem to offer good performance at a great price when compared to equivalent servos available elsewhere.Die Servos sind TOP.Leider haben die die Servohebel zu viel Spiel auf der Welle.Ich mute mit Hitec-Hebeln nachbessern um das Spiel zu entfernen.Good electrically but the plastic case is far too brittle. I've now had 5 of these shed their mounting lugs when installing or removing them. A great pity as they are otherwise very good.Very strong servo, however there have excessive play of the arm & the gears.
In addition the plastic that hold the bolts is very soft and broken easely
servo is great fast i use it for diy landing gear and it supports a 450 quad at 2800g with batteries and 2 axis gimbal and go pro.small strong reliable i had 2 hard landings and perfect funtionYes its ok but its smaller than the other std. Servos.... works goodbought 4 of these all work greatSuper, ein MgServo fr den preis 4 Stck im Betrieb spitze - Upload
Videos - Upload
Files
