Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

D591-v3 Digi-Micro Servo 1,3 kg / .09sec /8.5g

D591-v3 Digi-Micro Servo 1,3 kg / .09sec /8.5g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
29 g
SKU:
D591
Descripción
del

Servo Digital Micro arqueada

Arqueado hacen los servos digitales más claras y las más pequeñas en el mundo!

Con una alta fidelidad de MCU y un excelente algoritmo, usted está seguro de un funcionamiento suave y menos interrupciones de ruido.
Frecuencia de conversión de tecnología servo que se caliente demasiado bajo exigentes 3D y vuelo en helicóptero, a la vez que mantiene un bajo consumo de energía.

características:
Arqueada Digital Servo adopta la tecnología de conversión de frecuencia que lo hace mantener la calma bajo vuelo salvaje y extendida 3D y mantiene el consumo de energía bastante bajo.
banda muerta extremadamente estrecho (¡Ü 4|Ìs) da cuenta de la sensibilidad de la industria líder.
Fallan medida de seguridad (protección de señal perdida) --- formó un arco Digital Servo mantiene su posición y par motor durante la señal de vez en cuando pierde.
Modo completo AVCS Gyro DS compatible
El peso ligero pero resistente estructura no interferirán la maniobrabilidad en 3D de su avión.

Spec @ 4.8V
Par: 1,3 kg / cm (de par dinámico)
Velocidad: 0.09sec / 60 grados
dimensiones 22.3x21.9x11.4mm
Peso: 8,5 g
posición neutra exacta
banda muerta muy estrecha (<4us)
Incorporada a prueba de fallos (si mantiene la posición de la señal perdida)
conpliant Futaba AVCS Gyro modo DS.

** Notas
Viene con cuernos!
Este es un servo v3. Tiene las siguientes mejoras;
-Mucho Más amplio rango de tensión 3 ~ 6v
-Funciona Con todos los sistemas de energía ESC / BEC, UBEC, NiMH / NiCd

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    D591
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    29.00
  • Longitud:
    0.00
  • Ancho:
    0.00
  • Altura
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good digital servo for the price. Quick, strong, centers well, holds position, no glitches, much better than Corona. Less resolution than top digital servos, but hey, they cost four times more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 3 of the D591 servo and so far very happy with the performance and the value. It replaced my HS-81 on the tail of my Trex paired with a GY401. The D591 did work in digital mode but the tail seemed to hunt. Will try again on a different heli setup. The D591 did very well on my small aircraft setups...just do NOT over drive them (as stated in other reviews)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Quick, strong and low max current(200mA)- really frequency conversion digital servo.

But max pulse width is 2ms, after this the servo steps to end. Like potentiometer center and servo 1.5ms positions are not same. Maybe it's occasional defect. I have only one servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good digital servo for the price. Being just 9grams they are Perfect for Park flyer's. They are Quick, strong, centers well and holds position. I had no glitches. I replaced a couple of full size servos in a large balsa plane and they did the job just fine. I will buy more of these are great little servos.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great servo for that price, but doesn't work at 6V (4 AA batteries) and the servo way is limited to 135%.



Gutes Servo zu dem Preis, leider funktioniert das Servo berhaupt nicht an 6V - also 4 Mignon Batterien. Bei 5V (was die meisten BECs haben) gibt es jedoch keine Probleme. Die Wege sind auf 135% (sicher 125%) (Graupner/JR Wege) limitiert, daher nicht geeignet fr Delta-Modell (FunJet z.B.) Stellgenauigkeit ist digital-like super, die Anschlusskabel sind etwas kurz. Verarbeitung ist noch gut. Leider noch keine Langzeiterfahrungen vorhanden.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked for a day or two and then quit. I was using on my HBK2 with a HH gyro.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great item.

The digital servo works fine.

Good cheap.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bon servos,je suis trs content
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bon servos,je suis trs content.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this in my trex 450, the tail is even more rock solid with this servo than the old HS-50 I used to have in it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.