Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Bailando 850mm Pitts Deporte biplano PPE (ARF)

Generating Links

Bailando 850mm Pitts Deporte biplano PPE (ARF)

Precio:

Now save ahorra 48,98 € 48,98 €

Special Price 28,76 € 28,76 €

You save ahorra 48,98 € 48,98 €

Was  77,74 €

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
546000004-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Tomar la tensión de deporte de vuelo con la diversión y la durabilidad del baile Pitts Deporte biplano.

La construcción de una sola pieza de espuma EPP madera contrachapada y hace que para una rápida de construir, fuerte modelo que funciona tan bien como se ve!

Con su enorme superficie de las alas y el peso ligero, este pequeño Pitts tiene una carga alar de alrededor de 7 oz / pie cuadrado, lo que para un rendimiento vivo en un pequeño espacio aéreo!

mástiles de fibra de carbono incorporados en las alas y la cola del fuselaje dan rigidez añadida para más nítida respuesta de control de las enormes superficies

El Pitts baile se suministra como una rápida para construir, auto-jigging kit con unas partes bajas para un montaje rápido (1 calculamos tarde relajada debería ser suficiente.)

Un paquete de hardware a la medida se incluye con varillas, tapones de servo de control, los cuernos y las ruedas, etc (incluso la hélice 10x5 recomendada), dejando que proporcione su propia elección de los servos 9g, receptor, 25A ESC, y de la batería 3S 11.1V 1500 ~ 2200 mAh LiPoly a obtener el modelo en el aire con el mínimo gasto extra.

Experimentar las emociones únicas que sólo un biplano puede aportar y vuelta a las cabezas al mismo tiempo con el baile biplano Pitts. No te arrepentirás!

caracteristicas:
• Auto-construcción jigging
• Todo el fuselaje de espuma EPP con los gráficos de colores brillantes preimpresos
• Baja carga alar para un rendimiento
• paquete de hardware completo incluido
• Fácil de construir, las instrucciones a todo color incluidas

Especificaciones:
Envergadura: 850mm
Longitud: 680 mm
Peso: 700 g
Motor: 2830 1150kv (no incluido)

Necesario:
Transmisor de 4 canales y receptor
4 x servos 9g
motor outrunner 2830 1150kv
Batería 3S 11.1V 1500 ~ 2200 mAh LiPoly
Controlador de velocidad sin escobillas 25A

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Nic | Comprador verificado

  • Overall
  • Quality
  • Value

NOT an ARF

Apr 25, 2017

Unfortunately even the assembly instructions for building the thing (see files) omit important steps. Gluing the bottom wing in will result in problems if you need to get to the Rx, servos etc. I fitted some bits to screw it onto the fuselage. Faye is right that the CofG needs to be about 40mm back from lower wing which requires a 3S 2200mah battery almost hitting the back of the prop. To stop the top wing moving sideways I fitted some fine pull-pull wire from the top of the struts to the mid plywood and screwed the struts to the wing with fine screws and pop sticks. After a maiden crash where my CofG was too aft (I think), I'm planning on trimming some down elevator in to stop it climbing suddenly on takeoff. See photo.

Faye | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2016

I found the best CG starting place to be 40 mm back of the foremost point on the leading edge of the lower wing. This will require added weight in the nose. Flies well but the landing gear needs reinforcement.

fatman | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 09, 2015

Be aware that this is NOT an ARF model and the recieved kit is NOT like the photograph above. The kit contains 3 sheets of lazer cut plywood and pre-printed EPP parts. The instruction manual does not give any indication on how to assemble the plywood parts or how to attach the EPP parts. If you have never built a kit, stay well away from this model. The kit is overpriced.

Archivos de clientes
Assembly Instructions omitted from kit Download [3607]
DW Pitts Download [1161]
I have now built 3 Download [2235]
DW Pitts fuselage build Download [1723]
DW Pitts fuselage build Download [1723]
IMG_0140.JPG Download [1]
image.jpg Download [0]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios