New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Dardo 450 FPV Quad-Helicóptero con la distribución de energía, limpio y sucio, iluminación LED de alarma y LV

Dardo 450 FPV Quad-Helicóptero con la distribución de energía, limpio y sucio, iluminación LED de alarma y LV

Shipped From:
  • Global
QTY:

Now save guardar 49,38 € 49,38 €

Special Price 14,95 € 14,95 €

You save guardar 49,38 € 49,38 €

Was  64,33 €

Estado:
En stock
SKU:
9107000359-0
WANT FREE SHIPPING? Click here to find out more!

HobbyKing introduce un nuevo dardo a la serie. El FPV H Quad dardo 450 está repleto de características aún más y sin embargo conserva una etiqueta de precio diversión.

El dardo 450 paquetes algunas funciones muy útiles, diseño, durabilidad, apariencia y todavía no rompa el banco. El marco viene con un sistema de aislamiento de vibraciones limpio y sucio, diseñado para dar al controlador de la cámara y el vuelo de un agradable paseo liso. El dardo 450 también tiene incorporado un sistema de distribución de energía que se monta el CES de, así como el montaje directo para XT60 / T-conectores. También cuenta con un sistema de iluminación de cabeza orientación LED integrado y la cola y una alarma de baja tensión acoplado a los LEDs con un zumbido, así como salidas de alimentación AUX de A / V y el FC! El marco tiene canales de corte CNC para encaminar el cableado a través del marco, haciendo de este uno de los más limpios instala que puede tener.

Los brazos de motor son agradables y rollizo en 5 mm de espesor para el daño de choque, y la luz todavía hecho en todos los lugares correctos. El dardo también tiene opciones de montaje de la cámara para FPV y HD, montado hacia delante y lejos de la vista prop. El nuevo 450 despejará apoyos de 10 pulgadas y aceptar las baterías tan ancho como 56 mm!

Si se compara el dardo a la competición la única cosa que es menor es el precio.

caracteristicas:
• El sistema de aislamiento de vibraciones limpio y sucio
• Distribución de energía con construido en el monte de conector de alimentación y LED luces del punto
• Alarma de baja tensión integrado ligado al LED y el zumbador
• 8 ~ 10 pulgadas prop adaptables
• Los canales de enrutamiento de cables para una instalación limpia
• gruesos brazos de motor de 5mm

Especificaciones:
Distancia entre ejes: 450 mm
Peso: 399g

Necesario:
Motors: 2212 ~ 2216 tamaño
Hélices: 8 ~ 10 pulgadas
controlador de vuelo: Distancia de montaje 30-45MM
De la batería: 3 ~ 4s 2100-5400mah
5 canales de radio

  • SKU (Número de Referencia) 9107000359-0
  • Brand Other
  • Capacidad ( mAh ) -
  • Peso 560.0000
  • Longitud 350.00
  • Packaging Width 30.00
  • Altura 95.00
  • Dart 450 PCB FPV Quad
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This frame is a lot of fun. With the anti vib mount she is great. It fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This frame is a lot of fun. With the anti vib mount she is great. It fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.

Soldering is not too great on the PDB. It's a bit heavy and a bit weak.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Soldering is not too great on the PDB. It's a bit heavy and a bit weak.

There are no spares for this item, I had been waiting 2 weeks before I got a reply saying that there are no spares as I needed some arms now I have to get a new frame, don't bother buying this frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There are no spares for this item, I had been waiting 2 weeks before I got a reply saying that there are no spares as I needed some arms now I have to get a new frame, don't bother buying this frame.

A well made frame. Nick thick arms with all the holes pre drilled. The fixings and accessories are well made with aluminium spacers and steel screws. The PDB is well equipped with pre-installed and wired LED, with two modes (Solid/Flash). Would recommend thread lock on all fixings!

The frame has plenty of room inside for all components. The PDB has plenty of pads to enable tidy wiring and easy access to power anywhere on the quad.

My spec below:

900KV ntm motors
10" props
Afro 30a ESC
5000mah 4S lipo
Hitec Rx/Tx

Couple of issues with the frame however.

1. No nylon stand offs for the FC
2. No Nylon screws for the Vibration Dampers
3. Black Dampers are far too soft. Change to Blues

The above 3 points are all standard on the Dart 400, not sure why this doesn't get the same treatment. Hence the 4 crowns.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A well made frame. Nick thick arms with all the holes pre drilled. The fixings and accessories are well made with aluminium spacers and steel screws. The PDB is well equipped with pre-installed and wired LED, with two modes (Solid/Flash). Would recommend thread lock on all fixings!

The frame has plenty of room inside for all components. The PDB has plenty of pads to enable tidy wiring and easy access to power anywhere on the quad.

My spec below:

900KV ntm motors
10" props
Afro 30a ESC
5000mah 4S lipo
Hitec Rx/Tx

Couple of issues with the frame however.

1. No nylon stand offs for the FC
2. No Nylon screws for the Vibration Dampers
3. Black Dampers are far too soft. Change to Blues

The above 3 points are all standard on the Dart 400, not sure why this doesn't get the same treatment. Hence the 4 crowns.

When I purchased this I was skeptical about it's performance, After equipping it with Naza M flight computer some nice motors and FPV set-up. I was impressed. It flew wonderfully and stable. Then due to my error i dropped it out of the sky about 100ft. Hit the grass hard... To my surprise just the camera popped off NO DAMAGE to the frame or anything else. Put the camera back on and to this day it has over fifty flights and still flies great. I'm going to buy another soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When I purchased this I was skeptical about it's performance, After equipping it with Naza M flight computer some nice motors and FPV set-up. I was impressed. It flew wonderfully and stable. Then due to my error i dropped it out of the sky about 100ft. Hit the grass hard... To my surprise just the camera popped off NO DAMAGE to the frame or anything else. Put the camera back on and to this day it has over fifty flights and still flies great. I'm going to buy another soon.

Good frame with a few desing flaws. I bought 2 frames, both had the light mode switch ripped off and missing parts. One of the post had no threads. I find the rubber absorber a little weak. You need to order nylon screws to hold the dirty frame and clean frame together so they do not seperate when you try to install the battery. The little post used as landing gear are very weak. you should replace them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good frame with a few desing flaws. I bought 2 frames, both had the light mode switch ripped off and missing parts. One of the post had no threads. I find the rubber absorber a little weak. You need to order nylon screws to hold the dirty frame and clean frame together so they do not seperate when you try to install the battery. The little post used as landing gear are very weak. you should replace them.

Besides some initial problems with the delivery of this item (like others, the button for the battery alarm had broken off in shipping) - it has so far been a decent and fun frame to fly. The arms seem pretty durable, and its fairly light weight. With no assembly instructions, I would say its a moderate-level build - but is very clean looking when finished thanks to the integrated PDB, mounting area for ESC's and ample room for electronics.

The vibration dampening balls that come with it are very soft, and will not hold much weight in the clean section before bottoming out. You will probably want to get blue 65g dampeners (http://www.hobbyking.com/hobbyking/store/__55649__Vibration_Damping_Ball_65g_Bag_of_8_US_Warehouse_.html). Even with those, this still isn't meant to hold much weight. I have a gimbal and controller mounted on the front of mine and still get some vibration from the clean section of the frame - luckily I mostly shoot photos, my video is usable but not amazing.

I paird this frame with 30A Simonk ESC's and NTM Prop Drive Series 2830-1100KV Motors, and it fly very smooth and nice.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Besides some initial problems with the delivery of this item (like others, the button for the battery alarm had broken off in shipping) - it has so far been a decent and fun frame to fly. The arms seem pretty durable, and its fairly light weight. With no assembly instructions, I would say its a moderate-level build - but is very clean looking when finished thanks to the integrated PDB, mounting area for ESC's and ample room for electronics.

The vibration dampening balls that come with it are very soft, and will not hold much weight in the clean section before bottoming out. You will probably want to get blue 65g dampeners (http://www.hobbyking.com/hobbyking/store/__55649__Vibration_Damping_Ball_65g_Bag_of_8_US_Warehouse_.html). Even with those, this still isn't meant to hold much weight. I have a gimbal and controller mounted on the front of mine and still get some vibration from the clean section of the frame - luckily I mostly shoot photos, my video is usable but not amazing.

I paird this frame with 30A Simonk ESC's and NTM Prop Drive Series 2830-1100KV Motors, and it fly very smooth and nice.

Just finished mine no problem with screws at all. Pictures in files section. Oh my switch for the LEDs was missing the button but the switch still works, you just need a cap screw to press inside the hole.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just finished mine no problem with screws at all. Pictures in files section. Oh my switch for the LEDs was missing the button but the switch still works, you just need a cap screw to press inside the hole.

Very good frame with very thick and durable arms. Only minus is the cheap quality of screws. Be careful when tightening so you won't round them. Also, one spacer on the top or "clean" part of the frame didn't have threads on other end. Why there is no spare screws included?

I like the power distribution and the very bright LEDs very much too and the presoldered XT-60 is a nice little extra.

My setup has a Multistar 4S Li-Po, 2216-11 900KV Sunnysky motors and 10x4.7 props and seems to be flying smooth. Haven't tested with video gear yet, but I think it will be smooth too and there should be room for a FPV camera AND a GoPro or Mobius. :)

I recommend this frame for everyone who are looking for this sized quad frame for FPV or aerial video. Unbeatable in this price point! Just add some extra screws...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good frame with very thick and durable arms. Only minus is the cheap quality of screws. Be careful when tightening so you won't round them. Also, one spacer on the top or "clean" part of the frame didn't have threads on other end. Why there is no spare screws included?

I like the power distribution and the very bright LEDs very much too and the presoldered XT-60 is a nice little extra.

My setup has a Multistar 4S Li-Po, 2216-11 900KV Sunnysky motors and 10x4.7 props and seems to be flying smooth. Haven't tested with video gear yet, but I think it will be smooth too and there should be room for a FPV camera AND a GoPro or Mobius. :)

I recommend this frame for everyone who are looking for this sized quad frame for FPV or aerial video. Unbeatable in this price point! Just add some extra screws...

Customer files
Dart-450-Light Download [245]
Total weight RTF Download [27]
No File Name Download [3469]
Dart 450 Download [135]
Lights on Download [147]
No File Name Download [121]
Front Mounted Gimbal Download [2303]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save