El Dr. Mad empuje del motor Serie B3682 - 1700kv de 90mm EDF / 6S

• Overall
• Quality
• Value

Does the job.

Jan 06, 2020

Running this on only 3cells but at around 80 amps max and with a water cooling jacket for a custom designed jet unit. Not pushing it's capabilities as it's rated for around 3KW!

• Overall
• Quality
• Value

Excellent motor...

Dec 24, 2019

I tested this with a freewing metal housing, a change sun 12 blade 90mm edf impeller and a 6S 60C 5000mah Turnigy battery fully charged. I used a hobbyking 200 amp esc for this test. I got 129A, 2900W and 4.04 KG of thrust. That is in line with several 4072 1700kv motors I have tested. If that scares you pushing it that hard I got 97A, 2200W and 3.5 kilograms of thrust using the freewing 90mm12 blade impeller. I had to slightly modify the impeller to use a standard motor like this one. Hard to beat this unless you are going to step up to an 8S setup. Happy Flying!

• Overall
• Quality
• Value

Very Good for the money

Sep 05, 2019

very good product, strong

• Overall
• Quality
• Value

Good EDF inrunner

May 12, 2019

Using with Changesun 90mm 12 blades EDF. Pulls 125A on 6S.

• Overall
• Quality
• Value

brutal beast

Dec 06, 2018

I'm running this motor in combination with a YEP 150A and a 7x7 prop. Pulling about ~110A. It's working in a reinforced aircombat model which i build last winter. Well, it's quite heavy now to fly aircombat with this thing because it's a bit heavy with this setup, but that's my fault :D. It does what i wanted it to. It's faaaast. And it's more than 7 times the power that my model was usually construted for.
All in all a great motor for a great price.

• Overall
• Quality
• Value

restock!

Nov 07, 2016

Please restock in europe!!!!!!!!!!!!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 05, 2015

Awesome motor, just put an aditional Aluminium to sink the temperature

• Overall
• Quality
• Value

Customer Rated

Aug 23, 2015

Didn't give 5 stars for all just because of the similar find to previous review. The motor kv rating might be quite off. When running with flyfly 7-blade fan in flyfly 90mm EDF housing, Castle ICE 120hv timing at 1 (the lowest), it gave 100 Amp at 7-cell setup (~4400mah >30C fully charged). Running full throttle for most of the time, after landing the motor measures only ~125 F, pretty cool for ~2500W motor. And my 7lb Flyfly F-4 phantom moves pretty quick. It is a very good motor for 7s (flyfly 7-blade or CS 10blade) or 8s (5-6 blade).

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 14, 2015

kann nicht viel ber den motor sagen, war schlecht verpackt,die motorwelle hat den versandkarton durchschlagen,und hat nach meinem empfinden relativ viel spiel,da sie auch minimale kratzspuren hat,jetzt bin ich gespannt ob hobbyking eine schnell und unkomplizierte reklamation durchfhrt,werde das dann in einer spteren bewertung mitteilen

• Overall
• Quality
• Value

Customer Rated

Jan 04, 2014

I have this crazy Inrunner in my 2,17m F5D CFK-Hotliner with 1996g

RFM Prop 9x6 at 38mm Spinner are about 75 Amp at 4S on Ground, at another Hotliner with 45mm Spinner and same setup about 100 Amps. After flight recalculating results in lower Amp-Consume, so next time I try a little bit bigger Props from RFM (ONLY RFM because lot of RPM!!!)

These Motors are just born to drive a good Carbon-Prop!!!
The Sound is so amazing and the Power is just wow

The best choice of Speed Controller is the Hobbyking YEP 150A!
LiPo with high Current are absolutely recommended (> 100A: 4S, 3300mAh = >35C-40C).
Warm up your LiPo to 40C are good to have the full Power at the winter. ;-))

Now I have 7 different Dr. Mad Trust and I want nothing else for my Prop-Planes.
The next I just build with is the 2200KV for my 4S Pylon Racer (Shoestring, perhaps 8x8 APC).
This will give an extra kick in Sound and Speed ;-))