Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Durafly ™ JU-87G Stuka w / aletas y luces de 1100mm (PNF)

Generating Links

Durafly ™ JU-87G Stuka w / aletas y luces de 1100mm (PNF)

Precio:

Now save ahorra 0,00 € 0,00 €

202,28 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9142000088
¿Envío gratis? ¡Haga clic aquí! aprender más!

Durafly® ™ establece una vez más la serie con esta alta calidad JU-87G Stuka que cuenta con suficiente detalle escala y características para mantener cualquier entusiasta de pájaro de guerra feliz. La gama 1100 mm ofrece el piloto de RC un modelo de tamaño práctico que puede ser transportado fácilmente y utiliza el popular paquete de 2200mAh 3S Lipo, sin embargo, al mismo tiempo, el modelo es lo suficientemente grande como para tener presencia y es capaz de hacer frente a la mayoría de los campos de aviación, no hablar un poco de viento, por lo que es muy práctico.

Así como de aspecto fantástico, esto es plug Stuka y volar, lo que significa que se necesita muy poco trabajo de montaje. El potente motor outrunner, ESC, luces de navegación y servos son pre-instalado que le deja a pegamento en las plumas de la cola y alguna escala de detalle, perno en el enchufe en las alas y volar ir!

Hemos volado este magnífico Stuka ampliamente durante la prueba y que no vamos a defraudar, hay un montón de energía para aquellas maniobras warbird realmente escala y la estructura del avión es viceless sin ninguna pista de un puesto de punta. Los servos de flaps preinstalados tienen un buen funcionamiento, lento para ayudar a prevenir el globo y las solapas mismos permiten la velocidad de aproximación para llegar a un arrastre sin una pizca de wingrock. No hay duda, este es uno warbird aspecto fantástico y vuela tan fácilmente como un entrenador de ala baja!

caracteristicas:
• Detalle Ultra Escala
• Construcción de la alta calidad y acabado
• Plug & Fly, sólo tiene que añadir RX y Lipo (no incluido) y volar!
• Opcional 37mm cañón de Pod, basta con deslizar el
• Tren de rodaje robusto que puede manejar casi cualquier tira
• Resistente construcción de espuma EPO
• Flaps equipado de serie con los servos operación lenta para el realismo y para prevenir que se levante
Luces de navegación • PREINSTALDO
• Fácil y rápida construcción

Especificaciones:
Envergadura: 1100mm
Longitud: 820 mm
Peso del vuelo: 1000g
Motor: 3536 850kv sin escobillas del motor Outrunner
ESC: 35A w / BEC
Área de ala: 18.6dm2
Carga alar: 53.8g / dm2

incluye:
Manual de fotos completa
Todo el hardware
Y-Leads, destornillador

Se requiere:
Su propio 5 Canal TX / RX
Batería 2200mAh 3S Lipo
pegamento de espuma de fallos

Recambios disponibles AQUÍ!

  • Durafly™ JU-87G Stuka w/flaps & lights 1100mm
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

philippe | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2015

Trs bon avion, rien modifier, juste quelques collages parfaire. Vol vraiment tendu, dcollage super simple: il se lve trs bien pour un long roulage la drive. L' atterrissage ce fait en douceur sans volets (ils ne servent qu'a faire plus vrai, c'est tout). Avion trs silencieux, gnial!!! A recommander aux pilotes confirms qui veulent un Warbird avec une gueule diffrente. Juste petit bmol... il est blanc et gris donc il ne se voit pas bien dans un ciel laiteux.... normal c'est sa tenue de camouflage... Accu 3s, 2200 ma/h, mettre au fond dans la cage, ainsi il est lgrement piqueur: Parfait pour moi. Que du bonheur.. Je possde aussi le corsair de Durafly, qui est trs bon, mais je prfre ce Stuka.....

vadim | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 29, 2015

I got your Ju87 ago. But the fly had yesterday. Plane class - I met all my expectations. Sustainable flight to the landing comes perfectly. Durafly keep it up. When released into production Ju88?

Widowmaker | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 25, 2015

My first Durafly model, and I am a little disappointed. The plane came with one of the ailerons bent, even tho the package was not dented in the area. The nice white parts of the plane have yellow over spray on it. Maybe I am being to picky.

Rob666 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 16, 2015

This is my fourth Durafly model, up until this point I have been very pleased with the products. In the case of the Stuka, the quality has gone way down hill. The unit is not white, the top of the main wing and the fuselage are a dirty yellow color, while other parts are white. A total mismatch.
I am VERY disappointed in the appearance.

Tamas | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2014

I'm currently in the assembly process.

Right after opening I see the static flaps are fallen off. No problem I can fix it with some glue.

First step in assembly to glue the elevators to the tail. During this I noticed the whole fusalage and tail are slightly twisted. I tried to make it straight but no succes. Hopefully triming will be enough to balance it.

Then next step would be to mount the landing gear on the wings.
This supposed to be mounted with 4 screws. Problem is you can not screw in the screws vertically beause there is no room for your hand and screw driver from the landing gear. But the main problem is that the screw holes do not have screw threads and the material is so hard that it is not possible to screw in the srews.

I stopped building the plane here.
I might have to just glue the landing gears on, which means less strenght.

Richard | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2014

Finally got around to flying the Stuka today. I have had it built for several months, and was kind of intimidated by it. It just looked like it would be difficult to fly. Anyway, I shouldn't have waited. It required very little trimming, a bit of up elevator, and a couple of clicks of right rudder, and she was flying fantastic! Actually very stable in the air. It will do rolls, but they are slow and require some down elevator while inverted to keep from loosing altitude. Loops are big and open. I actually switched from low rates to high on this one to get a bit more response. It handled a light wind with no issues, and had no problems taking off from a grass field. It does have a tendency to flip on landings in grass though. I thought I had it down since it was rolling along nicely after touching down, but hit some thicker grass and flipped. No damage, except for the antenna on top of the canopy. I flew it twice, the second time with all the trims set, it was a joy to fly, and really looks good in the air. The flaps work well for slowing the plane down, and mine didn't pitch up when I deployed them initially at altitude to see how the plane would respond. Overall, I give this one 5 stars. Durafly has a winner with this one, and again, those low passes really look great with this plane!

Sebastian | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 20, 2014

Great plane for the money. Minor defect in mine? Tail was off by a small angle, did not really affect flight too much. Loves to torque roll so watch out.

Martin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

Ich bin berrascht wie gut das Teil eigentlich fliegt. Nach dem ich es ausgepackt hatte hatte ich so meine Zweifel. Aber mit ca 50g Blei vor dem Heckspron fliegt die Stuka. Es gibt so wenig Sterne wegen den Anlenkungen. Die mssen selber angebracht werden. Wenn man die Teile sieht und probiert die Ruderhrner anzubringen weis man auch warum. Das ist eine Fummelei und es passt nichts. Ich empfehle die Schrauben in die Ruderhrner einzudrehen und dann das Horn mit 5 min Epoxy anleimen. Der Schwerpunkt ist ok so wie angegeben, aber eben es braucht Blei am Ende. Das ist fr mich ein so nicht ok. Wer denkt er bekommt das hin ohne die MGs der irrt. die haben keinen Einfluss auf den SP nur aufs Gewicht. Aber alles in allem ist die Schaumwaffel so ok.

Wayne | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2013

Really happy with this plane. It was the first durafly model I bought, and through inexperience, it took me some time (months) to complete the build. Started the build a couple months ago, left it aside for a long time, and only completed the build last week. I was a bit woried about flying it. Looking at that wing, i was worried it wouldn't come off the ground without a long run-up, and I don't fly off a long runway :). All for nothing. The plane just about leaps into the air, and flies very well, if not awefully aerobatic. Flies a lot faster than I thought it would, and absolutely looks the part in fast fly-bys and dives. All in all - really pleased with it. Now all I got to do is find me some "Jericho trumpets" to attach to the wings :)

GaraKan | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 14, 2013

Love love love this plane! It flew nice and smooth, very little trim needed. It can do loops, rolls, etc. My maiden ended with a minor crash due to my hindsight with the elevator. It's tiny, so you need to up the throws for the ele. Mine couldn't yank up hard enough as I was so used to... such... hard yankings. But other than that, it held up well, no breakages, tough, tough, cg is dead on, love the design, love the feel of the flight, very highly recommended!

  1. 1
  2. 2
  3. 3
  4. 4
Archivos de clientes
manual Download [5955]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!