Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Durafly ™ Spitfire Mk1a 1100mm (PNF)

Durafly ™ Spitfire Mk1a 1100mm (PNF)

QTY:

Now save guardar 0,00 € 0,00 €

160,32 €
Stock:
Peso:
2784 g
SKU:
9499000079-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

El Spitfire es el avión de la definición de la 2 ª Guerra Mundial, y la Mk1a es sin duda la más conmovedora de todas las marcas. Durante los días más oscuros de la guerra, el Spitfire Mk1a y los pilotos que volaron él, llegaron a simbolizar la lucha y el triunfo de una nación sobre la adversidad. La lucha fue la Batalla de Inglaterra, los pilotos los pocos 'y el triunfo era el Spitfire!

Spitfire de Durafly Mk1a es en sí misma un homenaje conmovedor y apropiado para este legendario avión y los hombres que lo volaron.

Fuera de la caja del Spitfire está pintada en colores auténticos 1940 de combate día RAF y está provisto de una elección hoja de calcomanía de dos notables Batalla de Gran Bretaña aviones para elegir. 'DA-Z' como volado por Ace Flt Lt Bob Doe y 'EB-G', el avión de compañero de Ace, Flt Lt Eric bloqueo. De hecho, el Durafly Mk1a se proporciona intencionalmente como un lienzo en blanco pre-pintado, dejando la decisión final sobre sus marcas totalmente suya. El acabado maravillosa escala de la Mk1a se ve reforzada por una gran cantidad de características típicas de los altos estándares de Durafly incluyendo solapas fielmente reproducidas por partes, un esquema de escala, detalles de la superficie fina, accesorios excelentes escala y un sistema de luces de navegación LED de funcionamiento.

Usted encontrará que la atención al detalle que Durafly ha incluido en este modelo sólo es igualada por su excelente rendimiento y la gracia en el aire. Con la geometría revisada de retracción y una rueda de cola escala dirigible, la asistencia en tierra y los despegues se mejoran pero está en el aire, donde el Mk1a realmente entra en su cuenta, donde se presentan las características de pura raza que siempre distinguen al Spitfire, aparte de todas las demás aeronaves de combate del período .

El Durafly Spitfire Mk1a ha sido diseñado tanto para 3S 4S o set-ups (2200-2600 65C 3S / 2200mah 40C 4S) y gracias a su excelente manejo y características de vuelo bien balanceadas que proporcionarán confianza a los que vuela la misma. Al igual que el avión real este modelo es una alegría para volar y por supuesto va a llevar a cabo toda la gama de maniobras aéreas que se esperan de un pájaro de guerra WW2 incluyendo por supuesto el icónico Spitfire "rollo de la victoria".

Inspirado por el éxito de su fantástica P-40, Durafly han elevado el listón una vez más en la producción de un modelo que es, sencillamente, la mejor interpretación de cualquier Spitfire en esta escala.

¿Entonces, Qué esperas? Obtener uno!

caracteristicas:
• Plug and Fly, simplemente añada una batería Rx y Lipoly
• Construcción resistente EPO
• envolvente de vuelo ancha con un rendimiento estable y vuelo de escala
• Montaje rápido
• Acabado altamente detallado escala
• Auténtico "caza diurno" esquema de color de la RAF
• Elección de marcas Decal
• retrae eléctricas escala pre-instalado
• solapas escala de Funcionamiento
• Escala de contorno y accesorios
• La iluminación LED de navegación operativo pre-instalado
• rueda de cola orientable
• se puede volar en 3 o 4S

Especificaciones:
Envergadura: 1100mm (43.3 ")
Peso del vuelo: 1200 / 1300g (42/45 oz) 3/4 celular
Longitud: 1.000 mm (39,3 ")
Servos: 6 x 9 g Tipo (2 alerón, aleta 2, elevador, timón)
Motor: Aerostar 3636 770Kv outrunner sin escobillas
Objeto: 11.25x7 3 pala
50amp Aerostar: ESC
Batería: 2200-2600mah 3S 60-65C o 40C 2200mAh 4S (no incluido)
Canales: 5-6 canal requerido.

incluye:
Todo el hardware
Manual de instrucciones

Necesario:
Batería - 2200-2600mah 3S 60-65C o 2200mAh 40C 4S
Su propio canal 5-6 Tx / Rx

Piezas de repuesto se pueden encontrar aquí

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9499000079-0
  • Brand:
    Durafly
  • Peso ( g)
    2784.00
  • Longitud
    1150.00
  • Ancho:
    180.00
  • Altura:
    300.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a beauty, and as a relatively new flyer (2 years, one year BMFA club member) I can actually fly it, low rates advised. I've had six flights (five of which I've enjoyed, the first one I was just a bag of nerves) and it's still in one piece, bar the engine radiator/cowl under the wing which dropped off somewhere in our club field. Don't rely on the double sided tape but, glue it on.

Take off and landing is a challenge on grass, but switching from high rates to low rates on take off with full up elevator does the trick. I've not perfected landings yet but with the soft ground at our field it's aerial is still attached too, despite the repeated nose-overs.

My only issue is that the decals are not really sticky enough, even with ironing mine are losing their adhesion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well packed. Good instructions. Flew it on a 4S 2250 Rhino pack, 47pcnt after 6mins. Only needed about 3 clicks of up elevator trim. Love the ball links. Good finish. There were some minor niggles. Very limited space for the radio installation. Need to really think about the receiver placement. Maintenance stickers need some care to fit. Even rubbing the sticker did not stop it coming off with the top sheet. I found the best way was to use a sealing iron on low temp (80-90C) just on the letters. The cover sheet could then be removed without lifting the letters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing scale detail, amazing quality of airframe,very nice retracts and split flaps and to top it all off , one of the most easy and enjoyable warbirds to fly i have ever flown. Well done Durafly
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered this from the UK, the rudder horn was missing but hobbyking wished me to return the plane at my cost or wait 2 - 4 weeks for the missing part. not good customer care Hobbyking
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awesome! went together well with the decals being the most time consuming part, first flight once trimmed was excellent, plenty of power for BIG loops and lands easily for a spitfire. worth every penny. well done durafly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The best warbird Durafly make and probably the best foamy on the HK site. Everyone who loves warbirds should get one. Simply outstanding.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice looking model out of the box. Assembly is fairly straight forward. Radio compartment is a bit tight for fat fingers. Check servo operation many times before your first flight. I had a flap servo lock up and fail, not easily replaced if assembly is complete. Hobby King has many options, be sure and get one with the correct dimensions i.e. height, width and length. I replaced both so they matched. Good Luck and Good Flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome just started putting it together JUST A WARNING when putting the decals stickers on be very very careful the peal back strip sometimes sticks to the model which takes the paint work of so have a marker pen handy you may need it i did a few times. However the MK 1a Spitfire is very well made and looks Amazing. Can't wait to get her in the sky.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK now for a flight review. Where the MK24 flys like its on rails, surprisingly, the new Mk1a is not quite as good. It is harder to fly than the 24 so take care. It seems twitchier in the air. It is by no means bad, its just not quite as relaxing. The MK 24 is exceptionally stable in the air so it is a hard act to follow. I just can't work out if they are built to the same scale? For example the tail fin is quite a bit smaller on the MK 1. It is still a great rendition of an early spitfire and I'm sure a few more flights and a little tweaking will have me enjoying it just as much. Happy flying.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received mine, well packed and undamaged, phew! Not sure how it can be 1100mm same as the MK 24 as this plane is noticeably smaller in every way. Was the MK 24 much bigger? I didn't think so. This means the two are not to the same scale.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Durafly™ Spitfire Mk1a 1100mm

  • Spitfire Formation

  • Spitfire Formation

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.