The Tomcat X-Tail glider has been designed for the intermediate to experienced model flyer. It is very fast, agile and very maneuverable and has been designed with F3F sustained slope soaring in mind. It will fly in virtually all conditions which makes it an all-round contender in light or strong wind conditions. Clean and with the flaps set for speed the Tomcat will fly like a rocket, set the camber or crow braking then the Tomcat will fly slowly or make precise landings. The wing has an elliptical planform which gives the Tomcat a very wide speed envelope with no nasty habits a slow speeds. A very versatile and fantastic glider that you will never want to stop flying.
This new generation of electric glider is manufactured to a very high standard using fiber glass and carbon materials. The wings are a hollow molded fiberglass construction which is reinforced with carbon in the stress areas and they come in 2 parts for easy transportation with a square carbon wing joiner, the tail is also removable. The finish is outstanding, it is a smooth high gloss gel-coat finish with pre-painted graphics, it looks stunning. The E-Tomcat has ailerons, elevator, rudder and flaps which will require a minimum of a 6ch radio with mixing so that you can program in camber for different flight modes and crow braking for pinpoint landings. Hardware includes pushrods and clevises, control horns, wing and tail joiner, servo plates and covers.
Features:
• Smooth high gloss gel-coat finish with pre-painted graphics
• Built in ballast tube
• Fiberglass and carbon construction
• Hollow molded 2 part fiberglass/carbon wing for lightness
• Very high torsional strength and stiffness
• Flaps for camber modes and crow braking
• Very wide speed range
Specs:
Type: Composite F3F Slope Glider w/Flaps
Wingspan: 2.48 metres
Length: 1280mm
Wing Area: 44dm²
Construction: Fiberglass and carbon
Empty Weight: 1310g
Color: Red and white
Required:
Radio: 6 channels or more with mixing
Servos: 4 x MG slim wing servo, 2 x MG mini or micro servo
Battery: 4.8~6V Nimh with switch harness or 7.4V lipoly with BEC unit













































































































































































