New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Easy 3D Balsa Glow / 1280mm EP (ARF)

Easy 3D Balsa Glow / 1280mm EP (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
437000007
WANT FREE SHIPPING? Click here to find out more!

El Easy 3D es un gran club modelo de tamaño acrobático del estilo tradicional que está diseñado para ser muy divertido, así como barato y fácil de construir.

El Easy 3D es ligero, pero diseñado para manejar un poco de abuso! Por ejemplo, la aleación de bajo-carro es únicamente de goma montado, la rueda de cola orientable utiliza un timón sustancial y fuselaje de montaje, las tres ruedas utilizan neumáticos de goma adecuadas, los cuernos de control son el tipo de servicio pesado y la cubierta es de una construcción GF duro . También se incluyen con el Easy 3D es para los montajes tanto resplandor y EP, tanque de combustible, el montaje y el cono del motor, por lo que es una gran relación calidad-precio!

Este gran rendimiento "club" modelo de acrobacia aérea también es barato de construir, servo de norma será más que hasta el trabajo para todos, pero los pilotos 3D más graves y no hay duda de la capacidad de este modelo un buen precio, es brillante rendimiento a baja velocidad combinado con él es fácil de volar la naturaleza hacen que el Easy 3D de un gran primer modelo en 3D o en tarifas bajas, un modelo acrobático muy divertido!

caracteristicas:
• Construcción ligera Balsa / Ply
• De colores brillantes y Tradicional Opacidad recubrimiento, grande para la Orientación
• Construir rápido y fácil
• goma montado T / C
• Hardware riesgo incluido
• Plano gran primera 3D
• Los soportes para cualquier resplandor o EP
• Resistente neumáticos de caucho All Round
• Televisión en las alas para un fácil transporte
• Gran rápida del pabellón de lanzamiento

Especificaciones:
Envergadura: 1280mm
Área de ala: 45dm2
Longitud: 1190mm
Peso: 1900g 1950g ~

Se requiere:
Su propia 6 Canal TX / RX
0.46 Motor del resplandor / 42mm sin escobillas del motor Outrunner alrededor de 800w (3D)
5 x Servo Normalizado (4 x para la versión EP)
60A ESC (EP Version)
RX Batería (Lipo o NiMH)
UBEC (por EP o Lipo batería RX)
4s 2700mAh Lipo ~ 3300mAh (EP Version)

  • SKU (Número de Referencia) 437000007
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 3910.0000
  • Longitud 940.00
  • Packaging Width 210.00
  • Altura 430.00
  • Easy 3D Balsa Glow/EP
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

Customer files
No File Name Download [2152]
No File Name Download [1903]
failed elevator Download [2646]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save