Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

3.5 pulgadas EDF conductos ventilador de la unidad 5 de la lámina

3.5 pulgadas EDF conductos ventilador de la unidad 5 de la lámina

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
120 g
SKU:
OR003-00106-5B
Descripción
del

EDF conductos del ventilador de 3,5 pulgadas Unidad 5 de la lámina
Diámetro de la hoja: 89 mm / 3,5 pulgadas
Diámetro exterior de la caja: 92 mm
Espesor de la pared: 1.9mm
EDF Longitud: 73mm / 54mm sin collar
Frente Sábana Diámetro: 106 mm
Tipo de hoja: 5
Tamaño del eje: 3,175 mm
Hecho de alta resistencia de plástico reforzado.
hélices de repuesto disponibles.
La mortaja sobre este tema es extraíble, para que pueda ser colocado dentro de un avión o mantenerse en el ala o en la parte delantera y mantener el protector en la.
Se muestra el modelo de 6 palas, anuncio es para 5 modelo de hoja.
Este ventilador tendrá un máximo de un motor de diámetro 29 mm.

Motor recomendado: 390 / 28-47 9 Encienda (11,1 ~ 14,8 V)
ESC: 50A
Rpm: 4,000kv
Potencia: 650 ~ 1000 g de empuje


Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    OR003-00106-5B
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    120.00
  • Longitud:
    0.00
  • Ancho:
    0.00
  • Altura
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This fan is not very solid. I dont recomend it. The changesun is worth every cent. I suggest you buy that from Hobbyking instead of this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have tried on HXT 2835 (380S) 3900kv Brushless Inrunner. It is just not made for this motor. Quiton M may like to clarify this please. Marco Ripa - Are you happy with HXT 2435 (370S) ? thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great fan for use with the KD KA450H 3200kv brushles Heli Motor. I have several jets GWS f-15 and Art Tech SU-27 with these on 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The price is low and very satisfactory.

Making can be improved, and it is pleasant.

I want you to increase the lineup of the motor more.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good fan for the price but had to balance it, expected though considering it was so cheap, put turnigy 2836 3700kv heli motor in it and it has great thrust
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice fit for an A-10
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
C parfait fonctionne toujours jusqu'a maintenant
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cannot fly with this EDF coz it's to big for my F18. But it is a good material.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These 3.5" EDF's are built light - everybody spends time balancing them as the rotor is moulded off-centre about 1/4mm. Luckily blade clearance 1mm (inefficient) - Big FSA with little 28mm motor in centre.



I tested a 2835-3900Kva , 3s2200 for 52,2Ap 530Wp ! and 2835-2700Kva , 3S2200 for 27.5Ap 294Wp both with finned heat sinks - Generally this fan suits a large fuselage slower Jet like - HC Haoye J10 - slow VNE but good thrust & vertical 1:1
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fan is not bad but not great also. The rotor was very unbalanced so that needed a lot of work. The fan housing looks ok and strong.



I used a 2200kv 100g motor and 60A esc to test this fan on 4s Zippy H 5000 mAH. This resulted in 400W and about 800g thrust.



I needed a rotor for a 75mm fan and i cut and balanced this 89mm rotor. Works great! Down to 360W but only 650 g thrust.



Great fan but needs a lot of work to balance. I will buy 4 more
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.