Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

EDF Unidad de ventilador tubular 7 de la lámina de 3 pulgadas

EDF Unidad de ventilador tubular 7 de la lámina de 3 pulgadas

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
80 g
SKU:
OR003-00109-7B
Descripción
del

EDF Unidad de ventilador tubular 7 de la lámina de 3 pulgadas
Diámetro de la hoja: 3 pulgadas / 77 mm
Diámetro exterior de la caja: 83 mm
Espesor de la pared: 1.9mm
EDF Longitud: 86 mm
Tipo de hoja: 7
Tamaño del eje: 3,175 mm
Este EDF tendrá un motor con un diámetro máximo de 31 mm

Hecho de alta resistencia de plástico reforzado.
hélices de repuesto disponibles.

Motor recomendado: 28-35 8 Encienda (11,1 ~ 18.5V)
ESC: 35A
Rpm: 3,900kv
Potencia: 500 ~ 2000 g de empuje


Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    OR003-00109-7B
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    80.00
  • Longitud:
    95.00
  • Ancho:
    90.00
  • Altura
    90.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Used this with the Turnigy 2836 3200kv motor and 3S.
The sound is really nice actually, more "jet" than "woosh". It didn't need balancing though the motor mount seems a little weak and probably need reinforcement.
About the motor-edf combination: It pulls about 65 amps and give about 6-700 g of thrust in bench, slightly lower mounted in my machine due to the smaller outlet. The motor tends to overheat, so a lower kv motor with 4S might be a good idea.
I said "used" because I crashed my plane at 150 km/h which made the probably very hot motor to push itself through the mounting holes (again, the motor mount is a bit fragile).
All and all, I really enjoyed this EDF, but I should have choosed a lower kv motor with 4S instead of 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put value only two crowns , just because it comes with 3,17mm shaft .And the fact that the mini motor for this fan they all have 4mm shaft ,Which means you got buy extra shaft for cost of $5.99 .doesnt add up . Other wise great fan . PS i dont want to open the hole to 4mm not advise able .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this fan,1500kv outrunner,6 cell,40a mystery speedy,tested gives 1050grams thrust at 24.5amps..550watts....850g thrust in my kyosho f16 with restricted ducting for high speed, No cheat holes.very fast.. plane weighs 900g
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This EDF motor setup is solid.. I recommend getting this to upgrade all you Jets that require more thrust for your amps..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
it is great edf very high quality and low price....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
To get most out of fan you most close down the shroud rotor gap using duct tape or balsa wood. The gap allows to much air to pass buy making too much turbulence and you must put some foam lip or something in the inlet especially at high kv speeds.

55oz of thrust on 3s\2200\40c\88amps, 4100kv cyclone motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This EDF is awesome! I put this baby on a Hobbico Diablo and replaced the stock 55mm EDF. I made a custom underbelly mounting and tube using a 2 Liter pop bottle,so the odd size of this fan didn't matter much.I used a 2845 HXT 2200 kv motor on 4s 40c 2200 mAh Turnigy.It gives good thrust with the aggressive blades.I'm trying a 55 batt,but not sure if the motor will get too hot.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
comprei para o motor Wild Beast FED Outrunner 4880kv de 70 milmetros com variador 90 / 100 hobbyking ss
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great fan unit super strong, it just doesn't fit any regular Jets, this brand and size fit well for 90mm and not an upgrade for 70mm too much foam removeal
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Could be a bit more harder the plastic, when it reach critical rpm the blade touched inside walls(
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.