Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Extra de 300 Balsa 944mm (ARF)

Generating Links

Extra de 300 Balsa 944mm (ARF)

Precio:

Now save ahorra 0,00 € 0,00 €

64,69 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
Extra300A038S
¿Envío gratis? ¡Haga clic aquí! aprender más!

Este es un modelo acrobático muy bien construido, de peso ligero, que compró con el tren de potencia y el servo derecho de no sólo va a volar bien, no va a alterar el gerente del banco.

Una rápida y fácil de construir ARF, hay algunas características destacables como el motor laminado de vidrio / capa de montar y larguero principal, polainas de fibra de vidrio y la apariencia escala. Es muy ligero con superficies de control de tamaño decente y es pre-cubierto de película de calidad, el esquema no sólo ser bueno para la orientación, lo que hace que este extra 300 realmente un pequeño tío guapo!

Especificaciones:
Envergadura: 944mm
Longitud: 765mm
Peso seco: 328g
Área de ala: 15.2cm dm2

incluye:
Todo Hardware
Libro de instrucciones
Hoja de la etiqueta

Se requiere:
Su propio canal 4 de TX / RX
22mm ~ 28mm Outrunner motor sin escobillas
20A ESC
9g servo x 4
Batería de 1000 mAh ~ 1600mAh 3S Lipo
Spinner 30mm

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Tibor | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2015

Quality plane with beautiful appearance and easy build. Fly as expected, fast and agile for beginners, but a lovely and compact all rounder for intermediate pilots. Can take easily 2200mAh 3s lipo ;)

eu-cust | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 24, 2015

Seems to be strong ! maiden flight i went too far and surely lowered throttle too much. It tip stall to the ground from 20m high. only a little plywood inside the fuse to CA glue, LG to bolt again and propeller to change ! Seems very nose heavy. Receiver behind the servos, Bec under the wing fixation and the 3S1000 as far aft as possible on her tray an the CG is 50-55mm and not 60mm as stated. And i have added a tail wheel ! Second error from me is that the surface throws were too much. Elevon and aileron needs less. I have not tried the rudder... All in all not a first nor a second plane ! Good for adrenalin

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 06, 2015

Very beautiful plane. Arrived very well packed and has an excellent build quality.

Can't wait to put it in the air. I'll post my specs later

Karsten | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2014

Great little airplane. I had the maiden flight today and this thing flies beautifully, better than expected! Equipment is a SK3-2830-1130KV motor with 9x6 APC-E clone prop, 20A BlueSeries ESC, 4x TG9e 9g servos, Zippy 3s 1300 20C battery and a FASST-compatible FrSky receiver. I did not mount the (heavy!) landing gear at all, just landing on grass, very easy. Total flying weight without landing gear is a light 550g. To get CG at 60mm I mounted receiver behind rudder/elevator servos and it is perfect (again, without landing gear). Despite a bit of wind the plane was still good to control, the yellow/blue scheme is very visible, and the plane is very responsive with unlimited vertical and great maneuverability. I love it and can recommend this plane. Just build it light with a battery no bigger than say 1500 mAh and you will enjoy it!

kristoffer | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 20, 2014

Lovely Aircraft, nicely built and flies really great!
I flew it wit a Turnigy 2213 20turn 1050kv Engine and 1500 mAh 3S lipo and I just need 1/3 throttel. You have to be careful with the rudders since it is very agile. And you can't glide with it, then it stalls.
It is easy and Quick to build, nice looking and very nice finish. It is a bargain!
I replaced the tiny Wheels with bigger ones to get off from grass. The rubber band used to attach the wings really works great.
Get one fast!

t100au | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 15, 2014

I would recommend it, I started on the bixler 1.1 then upgraded to the bixler 2 and now I'm throwing this thing around the sky and loving it.
I put a ntm 28-26 1350KV / 302W in it witch is over powering it a little, HK 9g servos in it but had to cut out the ailons a little and a 30A esc.
Staring out witha 1500mah 3S battery but going to try a 2200mAh 4S, just to see how it gos.

John | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 20, 2013

Great kit. Highly recommended. Good value. Only issue with building was that the control rods did not have threads at the control surface ends. It's my first experience building a balsa kit and it looks beatiful. Maiden flight was excellent with no need to trim anything! I used an old Turnigy Aerodrive, 40A ESC and have a 1600mAh 3s setup. CG per the instructions is spot on. I added a steerable tailwheel becasue the kit only came with a curved piece of wire to act as a skid. Overall a great performer too and floats in nicely for landings. Another tip - don't assume ailerons hinges are glued in ... I almost lost the plane on the thirds flight as the ailerons almost fell off.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 25, 2013

Voll Geil!!! Hatte mir um den Preis nicht all zu viel erwartet, aber das ist von der Qualitt und Verarbeitung der Beste Flieger den ich je hatte.......

Alles aus GFK und kein Billigplastik......

teddy2355 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 08, 2013

jai recu mon extra300 et quand jai ouvert la boite et jai examiner les pieces jai fais... wowww .vraiment surprenant la qualit ses d'une qualit qui ma vraiment surpris ,trs plaisant a construire et vraiment le fuselage est impeccable .alors prsentement il est prt a voler mais la temprature ne le permet pas.mais jai trs hte de l'essay.je lui donne un 5 toiles .

Cyberwill | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 06, 2013

Ive bought this plane and I can say that its good construction. Lets see if will flight good as well.

  1. 1
  2. 2
  3. 3
  4. 4
Archivos de clientes
HK Extra 300 944mm BALSA Download [1567]
No File Name Download [144]
No File Name Download [144]
With carbon prop Download [1099]
1st Balsa Download [1827]
AS3x mounted Download [1423]
Extra 300 1 Download [2811]
Extra 300 1 Download [2811]
Extra 300 1 Download [2811]
Extra 300 Download [1954]
  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios