F-TEK 31AP Controlador de estabilización de vuelo del ala fija (w / autonivelante)

• Overall
• Quality
• Value

Customer Rated

Mar 20, 2014

MInes is useless, was able to use GCS in windows xp but cant make it work in W8, now idont have xp anymore so cmplete sistem is useless without GCS.
GCS is not able to work with google earth as did in xp, Spent many many many hourds studying forums and no solution emerges, I wouldnt labell this system as " easy" as many do.So warning no way to use GCS in W8 tho this day, after too much time spent in studying the whole thing.

• Overall
• Quality
• Value

Customer Rated

Jan 07, 2013

Good product, do what it's designed for, good upgrade for every FPV plateform but you MUST install it away from your Vtx and antenna especially if you use strong vtx like 1500mW

If it's to close the unit will ask for a Gyro init ( red LED continous flash) due to the interference

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 29, 2012

I purchased this for a future fpv project, i flashed it with version 2.1, tested this on my sky surfer 1400mm, with full gain and still is, not even one wiggle on stability mode, aside from my un neutraled pitch and needs no dualrates whatso ever. gps locks on pretty fast due to huge size, tested auto circle and rth flight modes. really cool product and hk sell it cheap. im still trying to get the neutral pitch of my plane and hope to do some video of its flights!

• Overall
• Quality
• Value

Customer Rated

Sep 22, 2012

Same as Feiyu FY-31ap, but this with firmware V. 2.0 ? Most actual firmware for FY31ap at FeiyuTech webpage is V. 1.20.

The plastic case lacks of manual and logos like the "original" has.

Pending flight tests.

• Overall
• Quality
• Value

Customer Rated

Sep 19, 2012

F-TEK 31AP Fixed Wing Flight Stabilization Controller the super stable all very !!!!!!!!!!!!!!!!!!!!!

• Overall
• Quality
• Value

Customer Rated

Sep 11, 2012

My review is based on the premise that this is identical to the FY-31AP (just rebadged/rebranded).

Based on personal experience, a RTH (Return to home) function is by far one of the safest elements to FPV flying. This unit is extremely easy to use and configure, and even easier to install.

effortless coupling with the HornetOSD provides a visual cue as to what mode you're in.

stability works perfectly, but be sure to straighten all your surfaces as best you can without trims as this unit will fight your tx inputs. in other words, if you feel you need some left roll trim, this unit will constantly counter that input and your craft will roll right.