F-TEK MenuVideo superposición Módulo w / GPS

• Overall
• Quality
• Value

Customer Rated

Aug 06, 2013

Ok - I hooked up to my new fatshark 5.8 and everything works great except no Voltages - neither the battery voltage nor the transmitter voltage show up - they just read 0.00. I have read everything online and cannot find a solution. Can anyone help????
PS I'm using a 12 volt security camera 2000 and the picture is great. Also toggling the screen modes with my gear switch
Overall OK but it sure would be nice to see the battery voltage to know when to come home!!

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 25, 2012

A worthy competitor to the OSD on price and quality, GPS work out exactly telemetriynaya information understandable and readable, there is uncertainty about the battery.

• Overall
• Quality
• Value

Customer Rated

Oct 20, 2012

This is my first OSD, I choose it because of all the useful information it displays and its easy connections making setup a breeze, I really wanted the artificial horizon however upon connecting it all up I found out that its only displayed when used with f-tek 31ap(fy31ap) I do plan on buying that in the future so not a big issue

My only other problem was I'm using a 5v camera and this supplies 12v for camera, I overcome this by only running my video through the osd and kept positive and negative running from my transmitter

All in all I am happy with this product. If you are after an easy to install osd I recommend this one!

• Overall
• Quality
• Value

Customer Rated

Oct 11, 2012

Feiyu, are terrible at support. Mine will show speed in the full data view but shows zero in the reduced view. Which is what you need for a multicopter. I've emailed Support twice and they don't even read the emails let alone respond. It works OK although at one time it showed I was579KM from home Also altitude readout is also a bit dodgy. I tink there is better value to be had out there.

• Overall
• Quality
• Value

Customer Rated

Oct 05, 2012

Worked fine for about an hour now it wont start up properly light just stays on the gps module and wont display anything. Unit gets quite hot also. If there is a fix for this let me know i have tried to re flash the firmware did nothing.