Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Cielo Favorito 3 Quattro 4 x 12A Brushless ESC Quadcopter 2-4S 1A BEC BLHeli

Generating Links

Cielo Favorito 3 Quattro 4 x 12A Brushless ESC Quadcopter 2-4S 1A BEC BLHeli

Precio:

Now save ahorra 0,00 € 0,00 €

30,58 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
586000002-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El cielo 3 Quattro 12Ax4 ofrece la solución perfecta para su potencia quadcopter mediante la incorporación de 4 x 12A ESC con el software BLHeli y un BEC en una sola unidad.

Esto mantiene el cableado al mínimo y permite montar esta unidad en el centro del marco en lugar de tener que montar un CES en cada brazo, lo que permite una instalación limpia que necesitan sólo 1 juego de cables de la batería.

El cielo 3 Quattro 12Ax4 se carga con el último software BLHeli y está repleto de características definidas por el usuario. La herramienta USB opcional le permite conectar el esc para el software favorito BLHeli interfaz gráfica de usuario para el ajuste de parámetros críticos como la sincronización y la compensación de De-Mag para los motores de alta KV.

Junto con su capacidad para operar en 2 ~ 4S LiPoly o 5 ~ 12 células de Ni-XX, el cielo 3 Quattro 12Ax4 es un ESC muy versátil para su multirotor o incluso un avión multimotor!

El cielo 3 Quattro 12Ax4 mantiene las cosas simples por tener todos los cables del motor pre-instalado y terminado con conectores de 2 mm de bala.
4 cables de señal (uno con el poder) se conectan directamente a los puertos de salida ESC de su controlador de vuelo para mantener las cosas más ordenado todavía.

caracteristicas:
• Software BLHeli (multirotor)
• Diseño compacto todo-en-uno ESC
• 4 x salida 12A (20A ráfaga)
• Opción de conexión de seguridad
• soportes antivibratorios integrados
• Función de calibración del acelerador
• La protección de baja tensión ajustable
• 3 modos de puesta en marcha
• 5 ajustes de temporización
• aceleración de la puesta en marcha ajustable
• 6 Brake settings
• Protección contra el sobrecalentamiento
• Totalmente programable a través del transmisor o adaptador USB Link
• posibilidad de montaje de 30,5 mm

Especificaciones:
Voltaje de entrada: 7,4 ~ 14,8 V (2 ~ 4S LiPoly)
Cont. Corriente: 12A x 4
Burst actual (10 seg): 20A x 4
BEC salida: 5V @ 1A
Tipo BEC: Lineal
Motor Longitud del alambre: 85mm
Cable de señal Longitud: 100 mm
Dimensiones: 50 x 45 x 10 mm
Peso: 58g (Inc. conduce y conectores) 35g sin las placas de cubierta superior / inferior

* Nota: El software favorito BLheli interfaz gráfica de usuario está disponible en la ficha archivos.

** Nota: El 4-en-1 puede funcionar sin el peso superior e inferior ahorro de placa de cubierta

  • Favourite Sky 3 Quattro
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Mel | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 24, 2016

I was very excited to test out the new Quattro 12a x 4 ESC. It made for a very clean installation with very professional-looking wiring. Unfortunately when I energize the unit it caught fire and damaged my flight control board. HobbyKing was really awesome about crediting my account or the board but I'm still out one flight controller I would not recommend this particular product but I've had great results with most of everything else I've bought from HobbyKing. I'll try posting some pictures of the board under the files tab.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 24, 2016

This is a great ESC but it will not fit 1 200 size quad. other than that it works well

jesus | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 04, 2015

After getting this product and installing it into my quadcopter it was flying find at first. But after a couple a flight it just falls from the sky. After taking off the props to inspect it better i found out that one of the motors was not spinning. I also bought the programming USB dongle, so i thought it was just something in the setting. But after messing around with it i couldn't find out what the problem was. Then i decided to see if i could find out a solution on the internet, and i found out that it was because of a wrong capacitor that was . Anyways i ended shorting out the board somehow. I would not recommend this ESC. Sadly because of how clean my quadcopter looked. Hopefully they fix this problem and stop selling faulty boards.

Albert | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2015

Don't forget you have to pay a price for cheep products. Brought one of these they were cheep and a good idea, took a week to make my 4th. quad copter only to find it was as dead as a door nail when I put the battery in the finished article. I think to cut the cost of cheep things they don't pay anybody to check that the finished article works. No good claiming from HK takes to long and its not easy, do what I have done 4 times before just throw them in the dustpan. This is the price you have to pay for cheep things.

foster | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 09, 2015

works great on smaller multi-rotors 2mm female connectors already attached. goes good with the dys be1806-13 2300kv brushless motor that comes with male 2mm connectors already attached

kr4mt@suddenlink | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 24, 2015

I bought this to use in a color 250 frame but had to remove the bottom case to fit into the copter. It is small but still a tight fit in 250 sized frames. I would suggest using individual ESC's if building anything 250 or smaller. Operationally this unit has performed as expected, no heat issues and hookup was a breeze.

Blick-Flytiger | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 15, 2015

Ich habe den ESC mit den empfohlenen Multistar Motoren gekauft und einen 250er Race Copter gebaut. Leider erzeugt der ESC Motorabsteller im Flug wodurch der Copter vom Himmel fllt, weil die Motoren erst nach neuer Initialisierung wieder ablaufen. Vermutlich wird dies durch ein zu niedriges Timing verursacht. Mein Copter wurde dabei zerstrt! :-( Das ESC wird ber USB Adapter nicht erlaubt erkannt, weshalb ich die Einstellungen nicht ndern kann. Warum gibt es keinen BEEP Code zum ndern ber Sender? Das ESC ist so nur Mll!

ZK-DWF | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2015

Installed one in my Spidex 220. Fitted perfectly into the floor mount. Performs well. No problems so far. Good value for money versus buying 4 ESCs. Saves on weight too.

Michael | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 21, 2015

This ESC reboots in flight. Expect your quad to randomly fall out of the sky. Don't take my word for it, here is a direct quote included in the favourite firmware "Jenny Fix Esc
Hi Everyone, I am Jenny from Favorite Electronics, who is the manufacturer for this ESC. Sorry to cause the reboot issue and late reply. It's hardware problem and the solution is easy, just need to replace a bigger capacitor from current 0.1uF to 1uf. Please refer to my below picture from the link to point us what the cap is. Any questions, please contact with me for jennyxcy2008@gmail.com."

Because its so easy to replace a surface mount capacitor! Thanks Jenny.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 17, 2015

Its ok, won't support 4S. Also causes a TON of noise on the power circuit which sucks if you plan to use FPV gear on the same feed. The ESC function on 3S works well. The setup GUI is easy to use. If you plan to use FPV gear on the same circuit, best to use a LC power filter behind your radio/camera.

  1. 1
  2. 2
Archivos de clientes
replace the capacitor I pointed (all 4pc Download [40]
replace the capacitor I pointed (all 4pc Download [40]
FixforrebootingESCproblem Download [464]
manual Download [233]
info for updating ESC Download [1202]
How to update firmware info Download [1202]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!