Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

FF GeeBee R2 EP .25 ARF

Generating Links

FF GeeBee R2 EP .25 ARF

Precio:

Now save ahorra 0,00 € 0,00 €

87,01 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
FF_geebee
¿Envío gratis? ¡Haga clic aquí! aprender más!

No es para los débiles de corazón. El Granville Hermanos todas las carreras avión estadounidense el GeeBee es una máquina voladora icónico!

Construido con un fuselaje de fibra de vidrio del GeeBee R2 EP está bien acabado y pintado y se completa con pantalones de la rueda.
Este plano le llevará alrededor de 4 horas en completarse. Si usted tiene miedo de taladros o trabajo de fabricación pequeño, entonces este no es el plano para usted.
ADVERTENCIA: Este plano sólo debe ser volado por pilotos con experiencia!

Especulación.
Material: Fibra de vidrio alas del fuselaje / Balsa
Envergadura: 1036mm
Longitud: 623mm
Área de ala: 21dm cuadrados.
Altura: 250 mm
Perfil aerodinámico: NACA2416
Peso del vuelo: 1200g (dependiendo de la batería / motor utilizado)

Sistema de potencia requerida (Se vende por separado).
Objeto: 7060 Diámetro mínimo
Motor: 35-30 o mayor 1700kv outrunner +
ESC: 30A +
Batería: 1600mAh 3S +
Servos: 9 g ~ 20g

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

ravdigo | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 07, 2011

This is the worst model for fly, if you bougth or will buy, please put a really strong motor (similar 46 or more).

mannigs | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 18, 2011

Ein Tipp zum Fahrwerk

Beide Gestaenge,durch LEICHTES biegen,angleichen und von dem Ende auf das das Rad kommt ca 5mm abschneiden(nur einen Stellring nutzen).

Jetzt kommts! Die zwei Felgenhaelften eines Rades kann man,mit SANFTER Gewalt trennen. Man hat dann pro Rad zwei Felgen und einen Reifen.

Die Teile knnen im Radhaus einzeln und der Reihe nach wieder auf der Radnabe zusammen gefgt werden. Ich hoffe ich konnte

helfen.

pejay | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 31, 2011

Beautiful plane and with a fantasrtic finish. It is truly amazing how it can be sold at a mere 80 bucks. Imagine making only a fibre glass body for that price. It's a great deal and I will buy one more just to keep for spare. Or use with a glow engine. The plane is actually not made for electrics. There is no space for battery but have plywood cut out for a tank. Wood motor mount is not very good and I think I see on the picture here that HK use a HXT mount. With a Turnigy C35-36 motor the mount HXT-C28-26 (height 48 mm) should fit nicely so that the prop will stay close to the cowling.You have 85 mm distance inside from fire wall to cowling opening. I regretfully did not use this mount but the supplied one but will do this on the next plane. And I think you need to angle motor mount a few degree down and to the right. The fire wall is straight in 90 degrees. I used the dummy motor and cut out ventilation holes around the periphery - looks much better than the large gaping hole up front.

ravdigo | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 18, 2011

A lot of work,more than 5 hour for finish, manual incomplete. But looks nice.

FERNIMANN | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 22, 2011

Esta precioso pero Sencillamente no lo compres, sigue mi consejo...

Big Steve | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2010

Plane looks GREAT out of the box, unfortunatly a few problems with decals. It's 7-11 decal sheet all 7's no 1'or 11's... Second ditch the crap they give you and run goldenrod for controls, stock to heavy and flimsy. Second running a 1000kv motor 3s 2500 and a 9x6 apc WILL NOT lift off the ground. Buried the nose after 25 feet or so, didn't even think of lifting off. suggest go to 4 cell OR switch to a 10x6 maybe a 11x4.5. Defienatly move wheels as far forward as will allow in wheel pants, and rule of thumb 1/3 wing chord. CG perfect but as I said with my set up would NOT take off in a 50mph headwind!.... :( Bigger battery or larger prop!...

creature_ceo | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2010

&#12385&#12423&#12387&#12392&#37325&#12356&#12391&#12377&#12364&#12289&#36074&#24863&#12399&#12356&#12356&#12391&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12399&#12363&#12431&#12356&#12356&#12391&#12377&#12364&#39131&#12400&#12377&#12398&#12399&#12385&#12423&#12387&#12392&#38627&#12375&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12399&#36890&#24120&#12398&#21322&#20998&#12367&#12425&#12356&#12398&#21205&#12365&#12395&#12375&#12383&#12411&#12358&#12364&#12356&#12356&#12391&#12377&#12290

&#12414&#12392&#12418&#12395&#39131&#12400&#12379&#12427&#12475&#12483&#12486&#12451&#12531&#12464&#12364&#20986&#12427&#12414&#12391&#20309&#24230&#12418&#33853&#12392&#12375&#12390&#12375&#12414&#12356&#12414&#12375&#12383&#12289&#12289&#12289&#12290

Cliente | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2010

&#37325&#12356&#12391&#12377&#12364&#36074&#24863&#31561&#12424&#12367&#12391&#12365&#12390&#12356&#12414&#12377&#12290

&#39131&#12435&#12391&#12427&#23039&#12364&#12363&#12431&#12356&#12356&#12391&#12377&#12290

&#12456&#12524&#12505&#12540&#12479&#12364&#12363&#12394&#12426&#21177&#12367&#12398&#12391&#24369&#12417&#12395&#12290

Cliente | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 03, 2010

muito bonito o geebee e uma vergonha que no podemos comprar pois no vem para o brasil

Cliente | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 31, 2010

Regarding the landing gear :

Forget the delivered and wheel pants : make a new one, 40mm higher and 40mm fronter with whell pants made of 6mm depron. This makes it "land-able" and give a more scale aspect !! It is also needed to reinforce the attachement in the wing.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Archivos de clientes
Gee Bee front Download [490]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios