Un chorro de tamaño EDF excelente parkflyer (EPO).
El chorro viene 95% pre-construido y viene con un potente sistema de escobillas 25A EDF y la rueda de nariz orientable.Debido a que el chorro está hecho de EPO, es muy resistente a la rotura y literalmente rebotar en choques ligeros. El material también es fácil de reparar y bastante flexible.
Volar Peso: 650 g
Motor: 2839 outrunner sin escobillas (3200KV)
ESC: 6 0A
Servo: 9g * 3pcs
Batería: 1600mAh 3S1P 20C Lipo Pack (no incluido)
EDF Diámetro: 64 mm
Necesario:Su propia TX y RX (con V-tipo de mezcla)11.1V 1600mAh 3S 20C
SKU (Número de Referencia):
Capacidad ( mAh )
Peso ( g)
- SKU (Número de Referencia):
Um avio razoavel, pois economizaram nos servos, usa um servo para profundoe e aileron, o meu veio com um problema na turbina, veio raspando e desbalanceada, em baixa, fica vibrando e oscilando, s funciona bem em alta.
Ainda no fiz nenhum voo, estou programando para em breve, por enquanto estou voando com o meu alpha, um excelente modelo.This jet flies very well, is stable and fast.
But the stickers are poor and are easily ruined.
The impeller sucks, is to be changed immediately because it uses aluminum cross shafts that are shameful. Place a Lander or Wemotec.
The trolleys are very fragile. In my opinion is worth less than the price offered. I've bought at 37.00 with shipping on ebay. c o m Hobbyking Council to lower the price even of the Bae Hawk T-45 and F-15 of the same manufacturer, because planes are low class. ...video link....
I changed stock ESC and put 60A ESC. I used 1800mah 4s 35-70C Turnigy nano lipo. I measured 44A at the begining so it dropped 40A and 600 W with full 4S battery. I flied with this equipment and no problem at all. It is more speed than 3S 2200 mah battery. Flying time is around 4 min. I will use next time 2200 4S nano battery.
For your informationHej.
I fly my F 16 yesterday....what a great flying...I am 100% happy and satisfay.its a great pasrk flyr..in this price...what a clip..this not fly like turbin...so you dont nead to have some expect from this model..but I recomended highlly for bigners..its fly so eassy..I fly with orignal setup and 3 cells 2250,11volt batarie...everry thing is working still fantastic after 4 flaying...I put batry lomg back in batrie place..have nice flight.F-16 lt opravdu hezky a maketov, nicmn je to lenoch a to celkov dojem kaz. Podruh u bych ji nekoupil....I removed the landing gear, and added 2 extra servos for separate aileron control. I have also mixed the elevator with recomended V-tail / delta mix. Flies nice with a 1800 3s pack, and also 2200 3s pack, but it can be a bit nose heavy.
CG is located at the point where you can see 2 small squares (10mm) on top of the wing.Good little flier. My son loves this plane! its had a beating and is still goingthe edf came balance!!
i'm so happy grear planeI have put mine together, and hooked up a receiver. I have no idea how to connect which server to which channel on the receiver. I tried it several different ways, and it is not right. The motor and fan are doing great, but I can't get the elevator/ailerons working right. I'm new at this and would appreciate a little help!this jet looks like the global hobby f-16 phase 3
the phase 3 flies great i have one and it has the motor, esc. just add 2 servos and radio system , flies on 1600 or 2100 3c lipo. get this one if you like the f-16.