HobbyKing 3D Filamento Impresora 1,75 mm 0,8 kg flexible del carrete (Negro)

• Overall
• Quality
• Value

Perfect

Dec 26, 2019

Prints perfect at 210 degrees C in my Ender 3-Pro. flexible with do not stretch..
Nice color and finish.

• Overall
• Quality
• Value

Great results on ender 3

Jun 10, 2019

Printing with ender 3 220/40. Sticks no problem prints great. layers stick perfect. I use this for RC truck parts and tires strong and flexible. Parts take a beating. Probably my favorite filiment. I still use retraction and support with no issues.

• Overall
• Quality
• Value

3D Filament

Jun 06, 2019

All of the 3D printer Filament I have bought from Hobby King has given very good to excellent results. I have not been disappointed yet! Be sure that you follow the general guidelines for printing with Flex Filament it sticks supremely well to the build plate and can damage the coating if you don’t use a glue stick or blue tape to act as an easy release barrier... so learn from my experience and read the Blogs!

• Overall
• Quality
• Value

works well if you need only lilte flex

Apr 28, 2019

Well not the most flexiple filament for sure maybe 95a-98a not sure but not ninjaflex anyway..

• Overall
• Quality
• Value

Strong, flexible, not stretchy, prints easy but needed dehydrating

Aug 06, 2018

Quite a good filament. Not very elastic (stretchy) but is quite flexible - great for gopro mounts for drones which is what I bought it for. My roll had a lot of moisture in it even though it was vacuum sealed with a bag of silica gel, so my prints came out quite rough. I dried it in a food dehydrator at 60c for 12 hours and it now prints nice and glossy.

• Overall
• Quality
• Value

Easy to print, super strong

Mar 19, 2018

This is a relatively easy to print flexible filament. It's not all that elastic, but the prints are very strong. Excellent for making cell phone cases, for instance. Printed thin, it is quite flexible, so for instance a single wall print is very squishy. At 2-3 walls, I woudn't call it soft anymore, but it has a good amount of give. I'm getting true black high gloss prints.
Just this weekend, I was making cosplay armors props. I was amazed that I could print durable armors with a single outside wall and 5% infill. I didn't want the glossy finish, so I used a rubber spray paint. I'm very pleased with the results. A complete shoulder armor for one side used just 56 grams of filament, including some support structures that I had to use!
Highly recommended as an affordable semi-flex print material.

• Overall
• Quality
• Value

Good flexible filament for low price

Mar 04, 2018

Great value.
I have one complaint about quality: color of the filament is more like dark grey after printing. So if you happen to use two brands, be aware that their colors are not the same even when sold as same color.
Printed part seems to be both flexible and strong (tested as RC car tyres, used on snow and ice).
I approve this filament, if you don't really want that black color for your print.