New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

AXN flotador-Jet EPO (ARF)

AXN flotador-Jet EPO (ARF)

Now save guardar 0,00 € 0,00 €

37,07 €
Estado:
Sin existencias!
SKU:
AXN-C-KIT
WANT FREE SHIPPING? Click here to find out more!

El chorro AXN flotante es un modelo perfecto para los principiantes. Sus características de vuelo estable y un manejo que perdona lo convierten en la plataforma perfecta para aprender a volar. A diferencia de otros modelos de su clase, el AXN flotador de chorro viene con alerones nada más sacarlo de la caja. Se trata de una superficie de control crítico que todos los pilotos en ciernes deben dominar.

Construido a partir de una fuerte espuma EPO con un acabado de alto brillo el flotador AXN-Jet es capaz de alcanzar altas velocidades en una pequeña cantidad de espacio o deslizándose con gracia alrededor de la brisa que sólo necesitan acelerador para ganar altura.

La características de vuelo predecibles, baja carga alar y el puntal de empuje también hacen que el flotador AXN-Jet una plataforma ideal para FPV. El uso de una batería más pequeña, como un 1600mAh a 1800mAh 3S1P permitirá la carga adicional en la parte delantera de la aeronave y hacer la búsqueda de la CG correcta sin tener que añadir peso adicional cola fácil.

El motor y la hélice 5x5 sugerido ofrecen el rendimiento y el tiempo de vuelo en función de su estilo de vuelo. Va a requerir un 2100kv sin escobillas outrunner, 4 x 9gram servos, una batería de 1600mAh ~ 2200mAh 3S1P Lipo (dependiendo de los requisitos de carga útil) de una ESC 20Amp y su propio transmisor y el receptor (Tx / Rx) para completar este modelo.

el tiempo y la hora demostrado una vez más el flotador AXN-Jet cumple todos los requisitos adecuados para cualquiera que quiera entrar a la afición como un principiante o pilotos intermedios que buscan entrar en el apasionante mundo del vuelo FPV.

Presupuesto:
Envergadura: 1290mm
Fusible Longitud: 860mm
Motor: 2100Kv Outrunner (no incluido)
Hélice: x 5x5inch (2 piezas incluidas)
ESC: 20A (no incluido)
Servos: 4 x servo 9g (no incluidas) para Timón, Ascensor, 2x alerón

Necesario:
Su propia RX / TX
20A Brushless ESC
4 X 9g servo
1600 ~ 2200mAh 3S Lipo
motor 2100kv Outrunner

  • SKU (Número de Referencia) AXN-C-KIT
  • Brand H-King
  • Peso 2549.0000
  • Longitud 830.00
  • Ancho 240.00
  • Altura 250.00
  • IC / 2 : Elec -
  • Motorsize ( diam - o - cc ) -
  • Envergadura ( mm ) 1280.00
  • Length(mm) -
  • SaleWeight ( g ) -
  • Capacidad ( mAh ) -
  • AXN Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.
  • Low, Slow, and Inverted
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great plane for the novice and the more professional Pilot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane for the novice and the more professional Pilot

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

Had this plane 2 months now being a beginner i have already crashed alot but this plane is extremely durable and easily glues back together, i used the 11.1v 2200mAh x-thin zippy batteries(PRODUCT ID: Z22003S-25-X) which fit perfectly without having to remove any foam from the battery compartment, this battery gives extremely long run times in excess of 30mins and the motor has plenty of power with the 5x5 supplied prop, overall i would highly recommend this to any beginner and experienced RC pilot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Had this plane 2 months now being a beginner i have already crashed alot but this plane is extremely durable and easily glues back together, i used the 11.1v 2200mAh x-thin zippy batteries(PRODUCT ID: Z22003S-25-X) which fit perfectly without having to remove any foam from the battery compartment, this battery gives extremely long run times in excess of 30mins and the motor has plenty of power with the 5x5 supplied prop, overall i would highly recommend this to any beginner and experienced RC pilot

Brilliant model to fly. Great fun and has really good performance at both fast and slow speeds. Was half expecting the wings to snap at one point but it stood up really well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brilliant model to fly. Great fun and has really good performance at both fast and slow speeds. Was half expecting the wings to snap at one point but it stood up really well.

There's a version with the stock motor that's not this one. Great plank for FPV, and it glides oh so well! Very quick to put together... the spar for the wings actually works very well... if you want a slow FPV flyer with a decent amount of room, this is it!

The motor is a little weak, but it will get you well in the air, just don't expect blazing speeds :) I cut into the fuselage to mount a naze32 running baseflight since they added RTH code. Haven't tested it yet but did maiden it last weekend and for FPV this is a LOT of fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There's a version with the stock motor that's not this one. Great plank for FPV, and it glides oh so well! Very quick to put together... the spar for the wings actually works very well... if you want a slow FPV flyer with a decent amount of room, this is it!

The motor is a little weak, but it will get you well in the air, just don't expect blazing speeds :) I cut into the fuselage to mount a naze32 running baseflight since they added RTH code. Haven't tested it yet but did maiden it last weekend and for FPV this is a LOT of fun!

easy build
easy flying
easy landing
just under 500G with no aileron, 2S 2200 and a 2805, 6X5 slowfly, 400G thrust more than enough as i did not want speed
flies good in the wind
yes, very little room in the fuselage for FPV stuff for example, but with no canopy or an homemade one it will be ok.
and for 42 you can't go wrong as it is a very good and nice to see fly one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

easy build
easy flying
easy landing
just under 500G with no aileron, 2S 2200 and a 2805, 6X5 slowfly, 400G thrust more than enough as i did not want speed
flies good in the wind
yes, very little room in the fuselage for FPV stuff for example, but with no canopy or an homemade one it will be ok.
and for 42 you can't go wrong as it is a very good and nice to see fly one

My introduction to electric planes, and Im so happy about it.
Very very easy to fly and incredibly strand in a crash. I have crashed tis into the sean and even had a battery fire and its still going! Its easy to build, but you need something like a 2200mah battery otherwise its tail heavy. I fly a Gopro on top of mine all day

http://www.youtube.com/watch?v=l0zpJNZAwgI&list=UUJm_qIN3z_i78NOndi_W-wA&spfreload=10

Im running a 30a ESC, a 2200 motor it is incredible...buy it buy it buy it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My introduction to electric planes, and Im so happy about it.
Very very easy to fly and incredibly strand in a crash. I have crashed tis into the sean and even had a battery fire and its still going! Its easy to build, but you need something like a 2200mah battery otherwise its tail heavy. I fly a Gopro on top of mine all day

http://www.youtube.com/watch?v=l0zpJNZAwgI&list=UUJm_qIN3z_i78NOndi_W-wA&spfreload=10

Im running a 30a ESC, a 2200 motor it is incredible...buy it buy it buy it!

This plane is similar to the multiplex easystar, its a little bit smaller, but the behavior its almost the same.
Im using a turnigy 2826 with the original propeller and 3s 2200mah batteries, its not very fast but is good to learn. Its not easy to fit the motor, had to cut the plastic piece where the engine is fixed to. Also does not have many space inside with all the wires passing near the servos and the rods.
For a beginning is problably a good choice. (I didnt crash mine, so i dont know if its good on that aspect)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is similar to the multiplex easystar, its a little bit smaller, but the behavior its almost the same.
Im using a turnigy 2826 with the original propeller and 3s 2200mah batteries, its not very fast but is good to learn. Its not easy to fit the motor, had to cut the plastic piece where the engine is fixed to. Also does not have many space inside with all the wires passing near the servos and the rods.
For a beginning is problably a good choice. (I didnt crash mine, so i dont know if its good on that aspect)

Ok floater, space for electrics is tiny though, I had to cut the centre to get the wires in but flies well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok floater, space for electrics is tiny though, I had to cut the centre to get the wires in but flies well

Customer files
Manual Download [493]
my axn floater-jet Download [233]
my axn floater-jet Download [233]
Manual 01 Download [121]
Manual 02 Download [121]
Manual 03 Download [135]
motor_2 Download [139]
motor_1 Download [129]
cabin Download [224]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save