Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

Flycat EDF espuma Jet MUY RÁPIDO (sólo kit)

Flycat EDF espuma Jet MUY RÁPIDO (sólo kit)

QTY:

Now save guardar 0,00 € 0,00 €

28,16 €
Stock:
Peso:
1395 g
SKU:
OR028-070

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Este pequeño kit de toma alrededor de 4 horas para construir y satisfará el jocky del acelerador en todos nosotros!

El Flycat 56mm viene con EDF y se necesita un ESC 25A y 4800kv Inrunner.

Este plano es extremadamente rápido, (más de 100 mph!), Sin embargo sigue siendo estable en vuelo lento.

Especulación.
Envergadura: 640mm
Longitud: 800 mm
Peso: 290 g
BESC: 25A (no incluido)
Motor: 20-30 4800kv tamaño Inrunner (no incluido)
Lipo: 1300mAh 11.1v 20C (no incluido)

Necesario.
Motor & ESC
3 x Servo 9g
5 o 10 minutos epoxi (Araldite)
1 x Servo Y plomo
plomo 1 x Servo Extensión
12 AWG alambre de silicio (20cm por el motor para ESC)
la batería lipo 1300mah 11.1v 20C
Su propio receptor y el transmisor

Nuestro informe de vuelo.

Kit encaja bien, ligero lijado de bordes anterior y posterior requeridos para eliminar la espuma adicional. Elegimos para no reforzar el ala con tubos CF, que didnt llegar a ser un problema, incluso a plena velocidad alta G gira.

Nos decidimos a montar el BESC siendo el área de la batería, en caso de que la batería necesaria para mover hacia adelante para ajustar CofG, sin embargo, esto no era necesario.

EDF se montó en el palo monte. montaje palo se acorta, con la pieza extra que se usa para elevar el FED de la palanca para desactivar el FED mortaja. 2 pernos a cabo la unidad de ventilación al palo, una antes y otra después de las aspas del ventilador.

Primer vuelo.

Hemos mantenido CofG 9,5 cm desde el ápice de las alas de borde de ataque. El Flycat se puso en marcha mano a 3/4 de gas, acelere rápidamente. Para nuestra sorpresa, no era necesario recorte.

El Flycat es un kit muy rápido para volar, y requiere una gran cantidad de ascensor en los giros. Se aconseja poner el ascensor en lanza máximo. Se necesita una inmensa cantidad de ascensor durante los giros!

En general un excelente plano que vuela sin problemas, incluso en días de viento.

Sugerimos un buen paquete de lipo, como este hotty masticar a través de un 1500mAh en sólo 5 minutos. Se utilizó el paquete de 3S1P ZIPPY-R 1800mAh 22C por alrededor de 8 vuelos minuto. En comparación con el paquete ZIPPY-Q que nos trajo corta en unos 7 minutos.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    OR028-070
  • Brand:
    No
  • Peso ( g)
    1395.00
  • Longitud
    670.00
  • Ancho:
    95.00
  • Altura:
    375.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A bit disappointed, I found out it's eps after I bought it! If it's half as tough as the skyfun I'll be happy with it :-)) great options with it edf or prop, WHY do they make these edfs where you have to buy SPECIAL long narrow motors to fit in them? I have a box full of spare motors none of which will fit the edf

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little plane and great little price. I fitted a Dr mad 50mm 4800 EDF and squeezed a zippy 2200 3cell in the nose. Worth buying good control horns and a couple of earth magnets for the canopy. fly's very stable for a little plane, you can also fly as if you stole it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the money this is a great little model, fly's really well. Invest in better quality control horns and earth magnets for the canopy, I also fitted a Dr mad 50mm fan. a careful bit of thumbing the inside of the battery area allows a zippy 2200 3cell to fit nicely.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used Turnigy 2610 4000KV, Turnigy Plush 40 Amp ESC, 1800Mah 20C and supplied EDF.
Speed a bit dissapointiung but it did fly and handle very nicely, sure needs a bit of power on when landing.
7mm throw on aileron, 12mm throw on elevator, 30pcntexpo. CoG at 110mm.
Will try 2610 5000KV next.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am building my second Fly cat . ( the first one being still in fly condition ) .. I want to put a tri-axis gyro box (orange RX-3S which is the smallest ) on the 3 rudders .( which needs to carve some place inside the fuse )
But , despite the engine I choosed for N 1 was great ,(TGY 2815 , ID: T28151A4800 . 73 g ) I look for an other engine that should be less heavy : an INRUNNER , Out shaft diam : < 24mm . Kv 4800 . Power # 400W
Who can help me to find an other engine than the TGY 2815 EDF ?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The fan adapter in this kit has a 3mm diameter hole in it. Nearly all the inrunner motors have a 2mm shaft diameter. Can someone who is using the EDF post a source for an appropriate motor to fit the fan housing. Thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 for this palne,this plane a very good quality and handling, i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv propeller 6x4.Very stable once

Thanks hobby,i give 6 thumb
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane a very good quality and handling,i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv.Very stable once
Thanks hobby
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3S 1000mah nano tech, 3 HXT servo, 30A birdie and Turnigy 2632 Brushless Motor 3400kv 350W with 5x5 pusher prop. CG 9 cm from the crossing of the leading edge. Average max speed : 120 km/h Perfect flight, easy to launch and less than 50 $ all together. A lot of fun.
For more speed find another motor high kv, 500W, 3S.
I definitely would get it again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very cheap, simple good kit that flies well and very fast long your setup and COG is correct. Very fast build as its so simple, great jet especially people who have spare electronics laying around from dead planes. I added tiny bit lead weight to the front to correct C.o.G running 1300mah 3S 25C lipo, 4000kv outrunner and 30amp esc
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • flycat pusher

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.