New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Flycolor 30 amperios del Multi-rotor ESC 2 ~ 6S Opto

Flycolor 30 amperios del Multi-rotor ESC 2 ~ 6S Opto

Discontinued Product

Please continue searching for a similar product.
SKU:
261000024-0
WANT FREE SHIPPING? Click here to find out more!

Estos controladores de velocidad electrónico Flycolor han sido desarrollados específicamente para el uso multi-rotor. Ellos usan un procesador MCU de alto rendimiento que da una respuesta lineal suave que es perfecto para los multi-rotores.

Los controladores de velocidad electrónico Flycolor de prestaciones sobre la protección térmica, se apagará si se pierde la señal, tener una protección de bajo voltaje, la protección anormal de la tensión de entrada y mucho más.

caracteristicas:
• Desarrollado específicamente para uso multi-rotor
• la respuesta del acelerador suave y lineal
• Utiliza potente y de alto rendimiento MCU
• Soporta velocidad constante
• Funciones de autoprotección múltiples: entrada de tensión anormal, protección de batería baja, sobre la protección térmica, la pérdida de señal del acelerador
• Crecer con seguridad, el motor no se extenderá hasta el CES está armado correctamente
• Programable vía palanca de gas (ver instrucciones de la sección "Archivos" ficha)

Especificaciones:
Corriente constante: 30A
Max Burst actual: 40A
Voltaje de entrada: 7.4V ~ 22.2V (25.5V máx)
BEC: Ninguno
Dimensiones: 50x23x9mm
Peso: 24g
Servo de ejecución: Tipo JR

Tenga en cuenta: Este es un controlador de velocidad Opto por lo que requiere una fuente de alimentación independiente para el receptor también hay conectores de la batería o el motor se suministran.

  • SKU (Número de Referencia) 261000024-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 31.0000
  • Longitud 100.00
  • Packaging Width 10.00
  • Altura 85.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Using these on a quad-copter using Quanum MT Series 3510 360KV motors on 6s. the setup i have could be a bit big for these but they are performing very well so far after 5 flights. I did install small vga heat sinks on them as i was a bit worry about the heat but that is now solved, placed them in the prop wash, running cool now.. the esc seem responsive, no need to flash them..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using these on a quad-copter using Quanum MT Series 3510 360KV motors on 6s. the setup i have could be a bit big for these but they are performing very well so far after 5 flights. I did install small vga heat sinks on them as i was a bit worry about the heat but that is now solved, placed them in the prop wash, running cool now.. the esc seem responsive, no need to flash them..

Purchased three of these for a HV 6S tricopter. They are tiny compared to other lower voltage ESC's. Soldering quality is excellent and they do the job. They get warm very quickly on 6S. I am not sure if i want to run 6S for to long on these sec's. Have been using 3S most of the time. They are very smooth to fly, and perform well for my application. Found that the heat sink will fall off the chip sets when you remove the head shrink, make sure to put it back on before sealing them up again after soldering motor and power wires to them. So far so good. Have not changed any settings just yet so can not comment on the correctness of the manual in the files tab. Just soldered them in and went flying. Good no fuss SC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased three of these for a HV 6S tricopter. They are tiny compared to other lower voltage ESC's. Soldering quality is excellent and they do the job. They get warm very quickly on 6S. I am not sure if i want to run 6S for to long on these sec's. Have been using 3S most of the time. They are very smooth to fly, and perform well for my application. Found that the heat sink will fall off the chip sets when you remove the head shrink, make sure to put it back on before sealing them up again after soldering motor and power wires to them. So far so good. Have not changed any settings just yet so can not comment on the correctness of the manual in the files tab. Just soldered them in and went flying. Good no fuss SC.

Customer files
Flycolor Manual Download [505]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save