New Items Noticias Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Hélice plegable W / 19mm Hub / 6x3 del eje 2 mm (1 unidad)

Hélice plegable W / 19mm Hub / 6x3 del eje 2 mm (1 unidad)

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

1,74 €
Estado:
En stock
SKU:
OR025-00206A
WANT FREE SHIPPING? Click here to find out more!

Bien acabado hélice 6x3 plegable hecho de plástico reforzado con carbono y con asas de acero

Adecuado para eje 2mm

  • SKU (Número de Referencia) OR025-00206A
  • Brand HobbyKing
  • Peso 19.0000
  • Longitud 100.00
  • Packaging Width 30.00
  • Altura 40.00
  • Diámetro X ( pulgadas ) 6.00
  • Y de paso ( pulgadas ) 3.00
  • Rotación CCW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Cheap propeller. I had to drill out the hole and tap 4-40. A few flights and the prop was unbalanced (likely due to my inferior flying prowess and ground contact).

Don't put the final, pointy nose-cone on, nearly impossible to remove. Fly without if you ever plan to take the prop off in the future, since one nose-in landing will drive the nose cone on very tight.

For 1.76, you can't complain too much... as long as you have the tap and set-screws available.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap propeller. I had to drill out the hole and tap 4-40. A few flights and the prop was unbalanced (likely due to my inferior flying prowess and ground contact).

Don't put the final, pointy nose-cone on, nearly impossible to remove. Fly without if you ever plan to take the prop off in the future, since one nose-in landing will drive the nose cone on very tight.

For 1.76, you can't complain too much... as long as you have the tap and set-screws available.

Fits strong and safe on 2.3mm shaft.
i am using it with speed 400 on 2s.
Recomended for planes (gliders) from 150 to 300 grams or up to 400g with stronger motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits strong and safe on 2.3mm shaft.
i am using it with speed 400 on 2s.
Recomended for planes (gliders) from 150 to 300 grams or up to 400g with stronger motor.

Nice propeller. However, it does not come with a grub screw needed to attach the propeller to a motor shaft. The nose hub is about 3cm in diameter. There is some slack between the propeller and the hub.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice propeller. However, it does not come with a grub screw needed to attach the propeller to a motor shaft. The nose hub is about 3cm in diameter. There is some slack between the propeller and the hub.

the center hole diameter is 2mm, so if u have 3 or more you should drill it little more

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the center hole diameter is 2mm, so if u have 3 or more you should drill it little more

6x3,5 steht darauf und hat 16cm Durchmesser, Spinner ca. 29mm Hoehe ca.27mm

Die Spitzenverkleidung laesst sich nach Montage nicht leich herunternehmen die Blaetter sind gut ausgeformt fuer mittlere Belastungen und Drehzahlen 10g leicht

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

6x3,5 steht darauf und hat 16cm Durchmesser, Spinner ca. 29mm Hoehe ca.27mm

Die Spitzenverkleidung laesst sich nach Montage nicht leich herunternehmen die Blaetter sind gut ausgeformt fuer mittlere Belastungen und Drehzahlen 10g leicht

dangerous product, two of them "exploded" in the first run. The blades flow away, the middle part was broken... I addition, the prop is very unbalanced, what a pity

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

dangerous product, two of them "exploded" in the first run. The blades flow away, the middle part was broken... I addition, the prop is very unbalanced, what a pity

Simply don't understand why they don't make the hole for the shaft retaining screws.
Propeller itself is very good indeed, but no everyone have a cnc for perfect holes.
My holes are not perfect and so my prop is useless because it spin very badly.
If they make the hole will buy again because of its quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Simply don't understand why they don't make the hole for the shaft retaining screws.
Propeller itself is very good indeed, but no everyone have a cnc for perfect holes.
My holes are not perfect and so my prop is useless because it spin very badly.
If they make the hole will buy again because of its quality.

Esta bien para el precio que tiene

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Esta bien para el precio que tiene

Nice prop for small gliders. Anyway it hasn't worked for me. I bought it to use it with the Bonsai, but It doesn't fold all the way in both sides, No good to use in Flying wings. For all pull-prop configs should do the trick.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice prop for small gliders. Anyway it hasn't worked for me. I bought it to use it with the Bonsai, but It doesn't fold all the way in both sides, No good to use in Flying wings. For all pull-prop configs should do the trick.

GRANDIOSA MINI ELICA MOLTO ADATTA AL MIO MINI SWIFT!! GRAZIEEE

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GRANDIOSA MINI ELICA MOLTO ADATTA AL MIO MINI SWIFT!! GRAZIEEE

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking