Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse

Goteck HC2125T HV Digital MG metal Entubado Mini Servo 20g / 6,5 kg / 0.12sec

Goteck HC2125T HV Digital MG metal Entubado Mini Servo 20g / 6,5 kg / 0.12sec

Now save guardar 0,00 € 0,00 €

16,15 €
Sin existencias!
Stock:
OUT OF STOCK
Peso:
50 g
SKU:
573000012-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

La gama de Goteck de metal revestido de mini servos digitales son hasta allí entre algunos de los mejores por su calidad y fiabilidad a un precio que ofrece una excelente relación calidad-precio. Los casos son mecanizados por CNC en aluminio sólido 6061, esto proporciona resistencia a la caja para el montaje y el tren de engranajes, sino que también actúa como un muy buen disipador de calor para el motor y el amplificador.

El HC2125T ofrece un metal de alta tensión orientada, de metal revestido de mini servo digital que tiene el par excepcional sin sacrificar demasiada velocidad. Se trata de un servo ideal para aviones o helicópteros 3D 450 de tamaño, sería particularmente buena en los sistemas de CCPM y flybarless. Este servo es muy feliz para operar el 6 ~ 7.4v lo que es ideal para ejecutar directamente desde una batería LiPoly 2s.

caracteristicas:
• mecanizado CNC 6061 caja de aluminio
• tren de engranajes de metal
• Motor sin núcleo
• rodamientos de bolas gemelas
• cuernos servo y tornillos de montaje

Especificaciones:
Tipo: HC2125T
Amplificador: Digital
Tensión de funcionamiento: 7.4v 6v ~
Par: 5,5 kg 6,5 kg @ 6v ~ @ 7.4v
Velocidad: 0.13sec @ ~ 6v 0.12sec @ 7.4v
Corriente de reposo: 240 mA @ ~ 6v 7.4v 280mA @
Corriente corriente: 1900mA @ ~ 6v 7.4v 2200mA @
Dimensiones: 23x12x27.5mm
Peso: 20 g
Banda muerta: 1 us
Motor: sin núcleo
Engranajes: Metal
Caso: 6061 aluminio
Servo enchufe: Tipo de JR
Servo plomo Longitud: 180 mm

Incluido:
servo 1 x Goteck HC2125T Digital
1 x cuerno doble servo
1 x cuerno servo único
2 x tornillos de montaje

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    573000012-0
  • Brand:
    No
  • Peso ( g)
    50.00
  • Longitud
    100.00
  • Ancho:
    20.00
  • Altura:
    70.00
  • Velocidad ( Sec / 60 grados )
    0.12
  • Par ( kg ) ( min . 0,01 kg )
    6.50
  • Unit Weight (g):
    20
  • A ( mm ):
    31.00
  • B ( mm )
    23.00
  • C ( mm )
    28.00
  • D ( mm ):
    12.00
  • E ( mm ):
    32.00
  • F ( mm )
    20.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought a couple of these servos for their very high torque for one of my robots.
They really are powerful but when I unfortunately stalled one the output shaft broke.
On closer examination the shaft is 2.36 mm diameter but is bored out to 1.9 mm leaving a wall thickness of only 0.23 mm. Because I had removed the connector it is modified so I can't claim on the warranty. Worse still I can't find another servo of the same size with as good a torque so I am going to either have to buy another and hope that doesn't break or redesign my robot.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 4 of these for my Viggen and two of them are fluttering widely on 6v (at random). I set the voltage back to 5.5v and the flutter has stopped however they should run up to 7.4v! The bec im using says its 20a and as far as i know shouldn't be a problem. Any idea? If i need to replace these two my hard work on the wing will be ruined! I should also mention i plugged them directly into the receiver and the problem is still there (I was thinking it was the extension lead).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
damn good servo would recommend these to others looking for good preforming servos, no slop in gears
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I installed 4 of these servos in a 3D plane. 2 of 4 have a huge shift of the central position, more than 5 mm on a flap and more than 10 mm on the elevon. So the plane is impossible to pilot. I regret thisinvestment which makes me waste my time and my money. I give 1 star because I cannot give 0.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased only one Goteck HC2125T as a test to see what my money buys. Except for the deadband being 5X wider (that's a bad thing) than advertized, I'm highly impressed with this servo. It's only been on the bench and run at 5.5V but what I see makes me feel good about the purchase. It's a metal gear (steel for last two gears) servo but as new there's no discernible backlash at all. Should hold up very well. The output shaft spline is 100pcnt compatible with arms made for Hitec micro servos such as the HS56 and HS65. This gives great flexibility with regards to arm shape choices and stiffness, something this Goteck HC2125T really needs when the full voltage is being applied. It's a brute for its size!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.