Este es el nuevo motor sin escobillas Inrunner GWS. Perfecto para los Sistemas de GWS del FED.
Por completo de especificaciones y la compatibilidad con los sistemas de GWS del FED, por favor haga clic más abajo;
Diámetro: 20 mm
Diámetro del eje: 2 mm
Longitud del eje: 10mm
42.65mm Longitud del motor
Diámetro del motor: 20mm
SKU (Número de Referencia):
Peso ( g)
- SKU (Número de Referencia):
I purchased two of these to re-engine my GWS A10. The A10 originally came with two brushed motors which were very underpowered. Now with these new motors coupled to the original fans I am able to hand launch this plane very easily. I am very pleased with their performance.Good engine,
tested this week end on a little parkjet with a 2s LiPo and a 4.7*4.7 propeller. Result : 13Amps and good fun !Just got my BL, I will try this configuration for my SU 27. Cheers!Ottimo motore abbinato alle ventole gws 55-64 al banco con ventola gws55 spinge 390 gr. con 11amp. di assorbimento (Notevole)On 3s it runs the SU 27 from HC very well fast and strong.Purchase 2 for my GWS A-10. Good motor - 12.5A. With 1800mah 21c to 32c battery ,the motors with EDF-55 6 blades the A-10 can fly at half throttle for almost 10 minutes. And the battery is slightly warm. Motors were warm after flying.its an ok motor. Used in a GWS F15 twin EDF jet. However, for its cost, there are other option available that are cheaper.I put it in edf55 and i get more power in my small jet from this small motor.These are among the best value budget inrunner motors for GWS EDF55 and 64 ducted fans you will purchase. Powerful and reliable they will power you GWS-262 with either a 3S 2200 lipo at 36amps for both to give your model stable performance or increase the battery size to 4S 2200 for stella performance, AND THEY HARDLY GET WARM.