GWS sin escobillas Outrunner 003 1030kv 49g (2212-13T)

• Overall
• Quality
• Value

Great Price

Nov 14, 2007

Great Price for a great motor! Note the sizes of the connectors or you will have to replace them like I did. The motor performs great, easy to switch the side of the output shaft.

• Overall
• Quality
• Value

GWS Brushless Outrunner (2212-

Nov 14, 2007

Ein super Motor fr den Preis, ich fliege ihn bei meiner 350g Viper und LM Loong Max 800 20C 3S1P. Damit geht der Flieger senkrecht und hovert bei ca. 3/4 Gas. Ich verwende normalerweise eine GWS RD 9043 damit hat der FLieger ca. 630g Schub bei 9.7 A. Bei windigem Wetter ist die GWS RD 8060 bei 9.1A perfekt, hat zwar nur ca. 500g Schub, allerdings mehr speed. :) Mit einer GWS RD 8040 entwickelt er ca. 480g Schub bei nur 6.4A.



Wickelt mann den Motor mit 0.5 mm Draht um, erreicht mann nachmal 10-20% hhere Schubwerte und einen besseren Wirkungsgrad!

• Overall
• Quality
• Value

motor

Nov 14, 2007

c'est le meme que l'yperion mais moins cher

• Overall
• Quality
• Value

GWS Brushless Outrunner 003 10

Nov 14, 2007

This motor is great, I used 3s lipo..



ESC : Mystery FM 30A

BAT : 3S 2200mAh EC POWER



TESTS

-

Propeller : 7x3,5 GWS EP

Amps : 3,68A (max. 4,17A)

RPM : 10570

Watts : max 50W



Propeller : 10x4,7 GWS EP

Amps : 15,5A (max. 17,3A)

RPM : 6600

Watts : max 197W !!!

• Overall
• Quality
• Value

Italian OT modeler

Nov 14, 2007

I like this little gem very much!

It is a real powerhouse and I ordered 2 to put it in the nose of my new Playboy Jr. replica old timer.It will match perfectly with 1700mAh lipo pack

• Overall
• Quality
• Value

smooth ride

Nov 14, 2007

this motor gives enough thrust to my (78" - 2 meter wing) motor glider which weighs 1200 gr. i am using graupner 9" folding prop. You can climb up to %30 angle. sufficient power to fly with a motorglider. it runs cool and make little noise. Fligth duration is around 20 minutes with 1300 ma 3s lipo.



http://www.youtube.com/watch?v=dBn395PjLgs

• Overall
• Quality
• Value

GWS Brushless Outrunner 003 10

Nov 14, 2007

I would not reccomend these motors to anyone. I bought 2 & they were fitted to a GWS FW190 & a GWS slow stick. The shaft bent on the first belly landing of the FW190 & inexplicably refused to work any more after 2 flights on the slow stick. This motor was recommended in the instructions of the FW 190. I am now much happier with a turnigy TR 35-30C 1100kv Brushless Outrunner in the FW190 & a TowerPro BM2408-21T / 18A BEC / 1047 Prop Combo in the slow stick. Both provide unbeleivable performance & value!