Looking for the perfect trainer? Or an in-expensive FPV platform? Maybe you are a club pilot looking for something you can just pull out of the car and fly on one of those lazy Sunday afternoons? The Hobbyking® ™ Bixler® ™ 2 ticks all of these boxes and more! The Bixler® ™ 2 has had some improvements to make it even better such as a bigger air inlet for better motor cooling of the uprated motor.
This version of the Bixler® ™ 2 comes as a "Plug and Play" which means that you will need a 6CH 2.4GHz radio system, a 3S 2200mAh lipoly battery and a battery charger. Just finish the assembly of the plane, setup your radio system and add your battery, power up the model and fly. It's that easy!
The Bixler® ™ 2 has all the right ingredients, made from super tough EPO foam, everything is pre-installed so minimal assembly time is required, in fact, by the time you have charged a battery, it should be ready to fly! The combination of size, low wing loading and a sleek fuselage makes for an excellent model with capable yet forgiving flight characteristics. The plug in wing makes the Bixler® ™ a practical model that is easy to transport to your favorite flying field and can be ready to fly in just minutes. Another practical feature of the Bixler® ™ 2 is its ability to accept a wide range of Lipoly sizes and/or FPV equipment courtesy of the enlarged canopy area. The Bixler® ™ 2 also comes with optional flaps which are pre-hinged (servos not included). The flaps are particularly ideal for FPV pilots carrying a heavier payload. The final improvement was to re-design the boom area to allow the Bixler® ™ 2 use a low KV motor and larger prop combo, which is more efficient and offers a more linear throttle response.
The larger wing, flaps & much larger canopy area mean that the Bixler® ™ 2 is now so much more versatile in terms of FPV use and for new pilots and experienced pilots alike who are simply flying for fun, these new design features, combined with the larger, more efficient prop mean that the Bixler® ™ 2 offers longer flight times. However you decide to fly the Bixler® ™ 2, you can be assured that it is still just as easy and fun to fly as ever!
• Easy and Fun to Fly
• Easy, Fast and Simple Assembly
• New Larger Canopy area to accommodate FPV equipment and/or larger flight battery
• Pre-Installed Servo's & Brushless Motor
• Larger Wing Span for greater glide & Payload Carrying Capability
• Bigger air inlet to keep the motor cool.
• Plastic Landing Skid
• New, lower KV Brushless Motor/larger Prop Combo for Greater Efficiency
• Pre-Installed Optional Flaps Mounted on Plastic Hinges (require Servos for operation - not included)
• Plug In Wings for Easy Transportation
• Pre-Installed Round Pin Hinges on Rudder & Elevator
Material: EPO Foam
Flying Weight: 760g
Motor: 2620-1300KV Brushless Outrunner
Servo: 4 x 9g
2 x Y Leads
2 x 150mm extension servo leads
Hook & Loop
2 x Spare Clevis
Horns & control Rods for Optional Flaps
1 x 2.4GHz 6CH transmitter and receiver
1 x 2200mAh 3S 20C lipoly battery
1 x battery charger
2 x 9g servo for flaps (optional)
1 x Servo Reverser if using optional flaps
SKU (Número de Referencia):
Peso ( g)
Motorsize ( diam - o - cc )
Envergadura ( mm ):
SaleWeight ( g )
Marco / PNF / RTF ( mm )
IC / 2 : Elec:
Capacidad ( mAh ):
- SKU (Número de Referencia):