H101 Salto Escala 2.45m Planeador Kit w / UltraDetail piloto y la cabina

• Overall
• Quality
• Value

Customer Rated

Apr 05, 2013

I have just finished my model & flown it over Easter weekend 2013, the model was well finished & presented well I was happy with the finished product and value for money.

The only issues in the build were working a neat way of installing the canopy I ran my own wire lume for the servos.

Flying the model proved to be a huge disappointment, I launched the model into the blue yonder trimmed it out and had it flying very nicely after about 3 minutes in level flight the wing joiner snapped with the right wing leaving the model, the resulting pile of bits not leaving a smile on my face.

I tried talking to Hobby King before posting my review; unfortunately the reply was we dont warranty crashed models.

Not much respect for someone who has built & flown hundreds of models over 37 years for myself & hobby shops.

Do not fly this model without replacing the wing joiner as it is not up to the job use solid carbon fibre or spring steel.

Thanks Hobby King for treating me like a dummy after spending thousands of dollars with you.

Mick Gunn

• Overall
• Quality
• Value

Customer Rated

Mar 01, 2013

Lieferung inerhalb von 2 Tagen !!!
Der Salto ist fr den Preis ein ein Hammer.
Sauber gefertigt , Flchenstab mitlerweile Edelstahl, Anlenkungen werde ich ndern ( Ruderhrner ), Folie ist gut, Runpf sehr edel, Pilot ist O.K, Leitwerk gut, Flchenprofiel fr Speet und Kunstflug.
Leider keine Anleitung ( EWD , Schwerpunkt ) Im Netz wird auch nicht sooo klar wie er eingestellt werden mu ?? Denke mal werde EWD zurcknehmen und Schwerpunkt bei 47-50 mm einstellen. Rest mu wohl erflogen werden. Fr unter hundert Euronen ein toller Flieger.

• Overall
• Quality
• Value

Customer Rated

Nov 24, 2012

H guys
Mine arrived today with broken canopy.
What shall I do ? Can HK send me an other canopy?
Overall the glider is fantastic with very good quality

• Overall
• Quality
• Value

Customer Rated

Sep 27, 2012

Habe meine heute bekommen und kann alle positive Angaben besttigen. BTW: Ich denke 2mm tiefe bei der EWD heist schlicht die EWD muss verringert werden. Ist typisch fr alle Serienbaukastenflieger, die gehen eben auf Nummer sicher. Langsam herantasten ist die beste Strategie denke ich.
Die Querruder sind leider 'luftdurchlssig' anscharniert und ich werde das so nicht fliegen. Gute alte Silikonscharniere lsen das kleine Problem schnell.
Alle kleinen Mngel sind im Bereich des 'Behebbaren' fr einen Modellbauer unerheblich.
Ich kann besttigen, das dieser Bausatz fr den Preis sehr gut ist und ich wrde ihn wieder kaufen.

• Overall
• Quality
• Value

Customer Rated

Jul 17, 2012

Build the Salto so I can have a glider to tow with my Pilatus PC6. It arrived quickly and it was packaged very well. Changed the way the wing was mounted to the fuse. (two bolts to hold the wing on) Moved the servo tray to the front of the fuse, added a tow release. Changed the incidence on the tail to more positive, permanently glued the tail on. Changed the control horns. Had to add weight to the nose to balance.
Have flown the Salto, it flies well. Very well behaved under tow, sensitive to control inputs, lands fast. It does thermal well, almost out of site twice. Used digital servos on wing, Mini on rudder-elevator, standard for tow release. Did not use the scale cockpit. Canopy is tapped on, works well.
Made lots of changes, including reinforcing the wing mount, and fuse.
Great Value for the money.
Enjoy flying it( under tow) Will try the slope next.
Happy Landings!!

• Overall
• Quality
• Value

Customer Rated

May 24, 2012

fliegt gut mit /- 8mm hoehenruderauschlag, drueber bekommt sie sofort einen abriss. schwerpunkt auf flaechestahl, damit baeumt sie nur minimal bei speedflug auf, luft aber super auf strecke. kraehenstellung bremst gut, bremsruder voll runter, quer 50pcnt rauf, hoehenruder 8pcnt rauf, damit ist sie nahezu neutral bei jeder geschwindigkeit. ewd passt leider nicht, 2mm tief und alles im lot. thermik kurbeln geht bis 20m durchmesser sauber. super durchzug, somit muss man auch vor keinem versauten schlepp angst haben, aus 10m hoehe macht man locker noch 300m mit landekurve. hohe g-belastungen sollte man sich kneifen, da biegt der fluegel gewaltig.

• Overall
• Quality
• Value

Customer Rated

May 04, 2012

Mine arrived with a broken V tail. Wing joiner is made of low quality steel (diameter 7 mm),and aside from being heavy, it bends easily and caused my plane to crash on maiden flight.
The tail incidence was out of alignment and severely twisted on the left side for 2,5 mm. Need to add balsa and do a lot of sanding work.

Not a Winner!

• Overall
• Quality
• Value

Customer Rated

Apr 20, 2012

Received mine in good condition. At first I changed several aspects such as the with of the V-tail horizontal part. More details can be found here:

http://www.modelbouwforum.nl/forums/zweefvliegen/127871-salto-de-warehouse.html

Due to these changes the all up weight will become around 1,48 kg. This includes a 7mm full carbon wing joiner.

For now the CG will be between 55 to 60 mm. (roughly 1/3 of the wing cord) I hope to make some test flights soon.

• Overall
• Quality
• Value

Customer Rated

Apr 18, 2012

Hi all, I purchased the Salto and had it shipped to New Zealand without problems.
The box was in excellent condition when it arrived however the RH V tail showed some small crushing which obviously had been done before packing at HK.
Build quality is OK.
The fuselage is pretty thin fibreglass but adequate. The hardware supplied was all there and mostly quite useful. Included is a tiny plywood tow hook which I would not use. In fact this model won't be seeing any bungy or winch lines as I bought it for the slope.

The model went together ok although running the aileron extension cables was trickier than first thought.
The steel rod wing joiner is long and heavy, I thought about buying a carbon tube but was unable to source the dia locally so I ended up using the supplied steel one.
The V tail pushrods are also heavy but these got used as well.

All this went into producing an AUW not too excessive but in my opinion, the WL ends up a bit too high, this model does not have a lot of wing area.
In flight the model tip stalls about the worst of any model I've flown and I would recommend at least 12 knots of breeze on the slope and preferrably around 15 to 18 kts.
Keep the wings as level as possible in turns until you get used to her and keep the speed up in those turns too and you should be all right.

Overall, good value to the US $ 98 I paid plus shipping but the wing could have

• Overall
• Quality
• Value

Customer Rated

Apr 05, 2012

hi,

got my delivery today 4days from order everything was A ok was very good boxed ;will place some pics from my bilding the glider and video from first flyght , top for hobbyking.