Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

550mm Marco H550 V1 fibra de vidrio Hexcopter

Generating Links

550mm Marco H550 V1 fibra de vidrio Hexcopter

Precio:

Now save ahorra 0,00 € 0,00 €

20,38 €
Enviado desde:
  • USA
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
297000030-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

El H550 V1 es un marco de 550mm hexcopter bien pensado construido con materiales de calidad. El bastidor principal es de fibra de vidrio mientras que los brazos se construyen a partir de poliamida de nylon ultra resistente.

El montaje es muy sencillo con manguitos de latón pre-roscado para todos los pernos del marco, por lo que no se requieren cierres tuercas. Utiliza un tamaño de perno de todo el diseño, por lo que el hardware muy fácil de mantener en orden y sólo requieren un tamaño de llave hexagonal para montar.

La capacidad de elevación adicional de una configuración hexagonal que hace que este marco ideal para llevar las cargas útiles más grandes, como los sistemas de cámaras y otros componentes electrónicos. Esto lo convierte en una plataforma de la cámara excepcional o simplemente un marco multi-rotor muy ágil y potente para la acrobacia!

El H550 también cuenta con brazos de colores (3 blancos y 3 rojos) que son excelentes para la orientación. Ayuda a mantener volando la dirección correcta sin necesidad de apoyos de diferentes colores.

Ofrecemos una línea completa de productos electrónicos de multi-rotor como el control multi-rotor de planchar, ESC y motores. Nunca ha sido tan fácil y asequible para obtener un quad en el aire!

caracteristicas:
Construido a partir de fibra de vidrio de calidad y nylon poliamida.
Pre-roscado manguitos de latón para todos los pernos del marco.
brazos de colores para la orientación para mantener volando en la dirección correcta.
Grandes lengüetas de montaje en la placa principal inferior del marco para facilitar el montaje de la cámara.
Ideal para llevar las cargas útiles más grandes, como los sistemas de cámaras y otros componentes electrónicos.
Fácil montaje.

Especificaciones:
Ancho: 550 mm
Altura: 55 mm
Peso: 460g (w / salida de la electrónica)
Agujeros de montaje del motor de pernos: 16 / 19mm

Necesario:
6 x 28 mm ~ 1000 1200KV (o similar tamaño / kv)
6 x 15 ~ 25 Amp ESC
6 x 8x4 ~ 10x4.5 Prop (3CW y 3CCW)
1 x Multi-Rotor Junta de Control de HobbyKing
1 x 2200 ~ 3000mAh 3S 11.1v Lipo batería

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

PageDM | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

First thing I noticed out of the box is the arms are not bright red, they are maroon/purple and the white ones are more off-white, not that it really matters but definitely doesn't look as clean as the one pictured, this could be a one off run perhaps with bad colours. The arms seem a little flexible on the twist axis, would shouldn't be a show stopper if motors and props are balanced. Otherwise it fits together well, at first I thought the screw holes were not quite lined up but if you start all the screws before fully tightening it comes together really well. As with most HK hardware, if you have a good quality set of hex drivers and don't over tighten the screws are fine. The edges of plates are sharp and will cause problems with wires so best to sand those down a bit with a dremel or something and seal the edges with CA. After saying all of that we are talking about a mere $20 frame kit, which is amazing value when you think $20 bucks barely buys dinner these days. 4 stars instead of 5 only because the colours don't match :)

MrMarek | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2014

Nice Frame. The colours of the arms are not pretty, but for 20$ is that OK. Cheap and nice Frame for easy building of the Hexacopter.
I did and I'm happy with. Resistant plastic, low cost replacement ans compatibility to the 450 size quadframe. Some seconds Video of my copter here
<object width="300" height="169"><param name="movie" value="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3" type="application/x-shockwave-flash" width="300" height="169" allowscriptaccess="always" allowfullscreen="true"></embed></object>

Mario | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 03, 2013

In erster Linie ist es ein gutes Produkt.
Es erfllt Sinn und Zweck zu einem guten Preis.
ABER: In der Artikelbeschreibung sind die weien Arme wei und die roten Arme richtig ordentlich rot. Die Realitt sieht da leider anders aus. Die weien Arme sind traurig grulich und die roten Arme sind sehr dunkelbraun. Absolut hsslich kann man nur sagen!
Das sollte unbedigt gendert werden. Es kommt einem vor, als wrde alles aus willkrlich zusammengemischten Recyclingresten mit zu wenig Farbstoff bestehen.
Sehr enttuschend.

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 25, 2013

Very strong arms. I use it for spares in my dead cat.

Bakerman | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 13, 2013

good quality but the arms are brown and white!

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 20, 2013

Nice Frame, decent quality.

awsome1 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2013

Cheap cheap cheap and easy to build and fairly rigid can put all your stuff in it and place the lipo on top

Evil Pusher | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2013

Kit from the europan warehouse was delievered whit brown arms. Perhaps it is an joke for german buyers (if you understand, what i mean) 8-)))) lol. The quality itself is acceptable, but not great - okay for the price

__HaKK | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 03, 2013

nice and cheap kit that does nto have too much flex, also good for spare arms as arms are not sold separately

lolo59 | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 30, 2013

quality is ok for the price nice for spare part in case of crash for 3D fly ^^

  1. 1
  2. 2
  3. 3
Archivos de clientes
brown arms Download [62]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios