New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

H550 V2 fibra de vidrio Hexcopter marco 550mm - Integrado Versión PCB

H550 V2 fibra de vidrio Hexcopter marco 550mm - Integrado Versión PCB

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
297000031-0
WANT FREE SHIPPING? Click here to find out more!

El H550 V2 es un marco de 550mm hexcopter bien pensado construido con materiales de calidad. El bastidor principal es de fibra de vidrio mientras que los brazos se construyen a partir de poliamida de nylon ultra resistente.

Esta versión de la H550 ofrece funciones integradas conexiones de PCB para la soldadura directa de los CES. Esto elimina la necesidad de un cuadro de distribución de energía o desordenados múltiples conectores de mantenimiento de sus equipos electrónicos diseño muy ordenado.

El montaje es muy sencillo con manguitos de latón pre-roscado para todos los pernos del marco, por lo que no se requieren cierres tuercas. Utiliza un tamaño de perno de todo el diseño, por lo que el hardware muy fácil de mantener en orden y sólo requieren un tamaño de llave hexagonal para montar.

La capacidad de elevación adicional de una configuración hexagonal que hace que este marco ideal para llevar las cargas útiles más grandes, como los sistemas de cámaras y otros componentes electrónicos. Esto lo convierte en una plataforma de la cámara excepcional o simplemente un marco multi-rotor muy ágil y potente para la acrobacia!

El H550 también cuenta con brazos de colores (3 blancos y 3 rojos) que son excelentes para la orientación. Ayuda a mantener volando la dirección correcta sin necesidad de apoyos de diferentes colores.

Ofrecemos una línea completa de productos electrónicos de multi-rotor como el control multi-rotor de planchar, ESC y motores. Nunca ha sido tan fácil y asequible para obtener un quad en el aire!

caracteristicas:
• Construido a partir de fibra de vidrio de calidad y nylon poliamida.
• Las conexiones de PCB integrados para la soldadura directa de los CES
• Pre-roscado manguitos de latón para todos los pernos del marco.
• Los brazos de colores para la orientación para mantenerlo volando en la dirección correcta.
• Grandes pestañas de montaje en la placa principal inferior del marco para facilitar el montaje de la cámara.
• Ideal para llevar cargas útiles más grandes, tales como sistemas de cámaras y otros componentes electrónicos.
• Fácil montaje.

Especificaciones:
Ancho: 550 mm
Altura: 55 mm
Peso: 478g (w / salida de la electrónica)
Agujeros de montaje del motor de pernos: 16 / 19mm

Necesario:
6 x 28 mm ~ 1000 1200KV (o similar tamaño / kv)
6 x 15 ~ 25 Amp ESC
6 x 8x4 ~ 10x4.5 Prop (3CW y 3CCW)
1 x Multi-Rotor Junta de Control de HobbyKing
1 x 2200 ~ 3000mAh 3S 11.1v Lipo batería

  • SKU (Número de Referencia) 297000031-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 652.0000
  • Longitud 256.00
  • Ancho 56.00
  • Altura 218.00
  • H550 V2 Hexcopter Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

H550 Hexacopter with Plush 40A ESC and 1400kv Turnigy outrunners and KK2. Flys like a dream.


www.youtube.com/watch?v=VwtWNcHNRpA

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

H550 Hexacopter with Plush 40A ESC and 1400kv Turnigy outrunners and KK2. Flys like a dream.


www.youtube.com/watch?v=VwtWNcHNRpA

Ordered on Sept 20th, got it on October 10th. I was worried to get the HJ type that most comments said its not good and very fragile but got the DJI copy one witch is stronger.
Excelent construction, i will be using 20Amp multistars with 1300 kv 28/26 ntm motors and 8.5 props.

has plenty of space for the ardupilot controller, GPS and telemetry kits! recomended!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered on Sept 20th, got it on October 10th. I was worried to get the HJ type that most comments said its not good and very fragile but got the DJI copy one witch is stronger.
Excelent construction, i will be using 20Amp multistars with 1300 kv 28/26 ntm motors and 8.5 props.

has plenty of space for the ardupilot controller, GPS and telemetry kits! recomended!!

Great product, Works as expected

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product, Works as expected

There is only 1 thing I can say about this...

AWESOME!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There is only 1 thing I can say about this...

AWESOME!

This is just such a damn weak frame. Don't even have to crash it to break an arm. Landing it hard from about 50cm is enough to get it broken. It is definitely to weak where the motorhold meets the arm. No spare parts available!! If you consider to buy one of these, definitely buy 2, you will need them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is just such a damn weak frame. Don't even have to crash it to break an arm. Landing it hard from about 50cm is enough to get it broken. It is definitely to weak where the motorhold meets the arm. No spare parts available!! If you consider to buy one of these, definitely buy 2, you will need them.

noticeably better quality arm compared to the prior version for almost a year, changed the size of the screws on the 2.5mm holes continue to 3mm, 100pcnt compatible with the DJI

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

noticeably better quality arm compared to the prior version for almost a year, changed the size of the screws on the 2.5mm holes continue to 3mm, 100pcnt compatible with the DJI

Really nice frame that gives the same quality as the dji frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really nice frame that gives the same quality as the dji frame.

Quite rigid frames. A lot better than the aluminium frames out here.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite rigid frames. A lot better than the aluminium frames out here.

I broke an arm on my dji frame and replaced it with an arm from this frame. It broke from 5' I replaced that one and the next one broke from about 2'. Not up to my experience with other HK products.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I broke an arm on my dji frame and replaced it with an arm from this frame. It broke from 5' I replaced that one and the next one broke from about 2'. Not up to my experience with other HK products.

these frames are built very strong an durable,all went together well, thanks HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these frames are built very strong an durable,all went together well, thanks HK

  1. 1
  2. 2
  3. 3
Customer files
DRONCAT-550 Download [1195]
DRONCAT-550 Download [1195]
DRONCAT-550 Download [392]
DRONCAT-550 Download [800]
KK2.0 Board and DX8 Download [2207]
KK2.0 Board and DX8 with leds Download [1388]
Hexa Build1 Download [3773]
Hexa2-Cover Download [2496]
Hexa3-Brains Download [2832]
Hexa4-Bottom Download [3623]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save