Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Harrier 70mm Jet EDF - 780 mm (ARF)

Harrier 70mm Jet EDF - 780 mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3460 g
SKU:
H803-KIT

Combine

essential items and
battery
servo
motor
acc
Descripción
del

El Hawker Harrier fue durante muchos años, los mundos solamente de aviones de combate de aviones VTOL / huelga y fue diseñado para operar desde pistas de aterrizaje de turno que no eran vulnerables contra los ataques aéreos. La variante Sea Harrier encontró la fama mundial durante el conflicto de las Malvinas donde se silenció a los críticos con su impresionante rendimiento de combate. Recientemente se retiró después de 40 años de servicio, ahora es tu oportunidad de volar esta leyenda de la aviación militar.

Este es un gran modelo que se ve tan impresionante en el aire, se trata con la opción fijada de acuerdo al carro, pero es tan fácil de lanzamiento de la mano debido a su peso ligero y la carga alar luz, que puede ser volado en casi cualquier lugar.

Este Sea Harrier vuela muy bien y es muy fácil de vivir, estamos hablando de la experiencia de haber tenido muchos, muchos vuelos con éste, un tema inusual y un tamaño impresionante que hará girar las cabezas en cualquier campo de vuelo.

Especulación.
Envergadura: 780mm
Longitud: 1250mm
Peso: 650 g
Motor: 2826-2800 kv sin escobillas Outrunner (Obligatorio)
Unidad de EDF: 70 mm (incluido)
ESC: 40A (Obligatorio)
Servos: 3x9g (Obligatorio)

Necesario:
40A ESC
3 x 9gram
2826-2800kv motor sin escobillas
TX y RX
4S1P 14.8v 2200 ~ 2650 Lipoly

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    H803-KIT
  • Brand:
    N/A
  • Peso ( g)
    3460.00
  • Longitud
    940.00
  • Ancho:
    240.00
  • Altura:
    440.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Buy one of these if you love to build. This is a builders dream. I have cut out and made my exhaust shoot straight out. Added a retracts nose gear and a glider retract in the rear. Tons of room. Still working on the model and will post photos of it when I'm done. I don't expect to go fast with this plane. But just nice speeds with a cool look. No VTOL at all. I'll wait until someone comes up with that fly able plane. If you are in the USA! I got mine in 12 days!!!! Get one. You won't be disappointed unless you just want to plug and fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received the model with some damage to leading edge of the wing which required some filling and there were a few minor dings and dents on the top of the fuselage. The model is not EPO foam so dents easily. I installed a Dr Mad 70mm fan and turnigy 60amp ESC. With a Turnigy Nano 2200mah (35C) installed in nose compartment as far back as it will go, the model balances within CofG limits. I have been flying the jet off grass with the wheels on and it does takes a fair bit of runway to get airborne. Due to the location of the exhaust outlets (slightly angled), it does take lots of power to keep it flying which results in short flights of 2.5 min on my current pack. I also had to add a small hole in the bottom of the fuselage, just forward of the nose gear to get some cooling air into the batter compartment and a small stringer in the horizontal tail wings as they were very flimsy. Once you get it in the air it is relatively stable for an aircraft with an anhedral wing. Although it is not a very fast flyer, it definitely does have the cool factor when you bring it to the flying field. For the price it is worth it to add one to your RC fleet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This aircraft flies really well on the HK reccomended motor and battery combo, however, needs a few mods.
The hinges on the ailerons and elevators are terrible, I wouldn't trust them to hold up to even 1 flight. I replaced mine with proper pinned hinges. The elevator pushrods were kinked inside and also needed replacing. I also relocated the LiPo to the centre compartment and used 2x 2S wired in series either side of the fan unit to help get the CG in limits.
It flies well with no nasty surprises despite the swept anhedral wing and slows down nicely for landing without tip stalling
https://www.youtube.com/watch?v=1S1zg-slvfA
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
servo
motor
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.