Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

1000kV hexTronik DT1000 sin escobillas Outrunner

1000kV hexTronik DT1000 sin escobillas Outrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
140 g
SKU:
413000003
Descripción
del

Las apariencias engañan. Este outrunner es de alrededor de dos veces el tamaño de un motor de campana towerpro, y se balancea un apoyo mucho mayor. Su motor utilizado en algunos de los Arte-técnicos nuevos kits de avión, que es testiment a su durabilidad, facilidad de uso y calidad.

Especulación.
Voltaje necesario: 11.1v
Max consumo de corriente: 35A
la potencia máxima: 500W
Sin corriente de carga: 1.2A
Eje: M4 (adapta perfectamente a Towerpor / SF GWS apoyos Fly lenta)
Peso: 115 g
Diámetro: 41 mm
Longitud total: 66 mm
KV: 1000 rpm / v
Viene con soporte, como se muestra en la imagen

Prueba prop
Prop Tamaño Tensión de empuje Ampere
11x9 tres palas 11.1V 20A 1200g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    413000003
  • Brand:
    hexTronik
  • Peso ( g)
    140.00
  • Longitud
    80.00
  • Ancho:
    60.00
  • Altura:
    65.00
  • Kv (rpm / v)
    1000.00
  • Corrientes max (A)
    35.00
  • Potencia ( W ):
    500.00
  • B Longitud ( mm ):
    33.00
  • Puede longitud D ( mm )
    13.00
  • Max Voltaje ( V )
    12.00
  • Un eje ( mm ):
    4.00
  • Unit Weight (g):
    115
  • C Diámetro ( mm )
    41.00
  • Longitud Total E ( mm )
    66.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
???? ??? ? ??? ??? ???

?? ?? ?????
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.