Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global
  • USA

750KV hexTronik DT750 sin escobillas Outrunner

750KV hexTronik DT750 sin escobillas Outrunner

QTY:

Now save guardar 0,00 € 0,00 €

11,66 €
Stock:
Peso:
79 g
SKU:
DT750

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Las apariencias engañan. Este outrunner es de alrededor de dos veces el tamaño de un motor de campana towerpro, y se balancea un apoyo mucho mayor. Su motor utilizado en algunos de los Arte-técnicos nuevos kits de avión, que es testiment a su durabilidad, facilidad de uso y calidad.
El DT700 se moverá un 11x4.7 SF puntal muy bien, para producir más de 900 g de empuje.
Su grande para foamies GWS más grandes o planos parkfly.

Especulación.
Voltaje necesario: 11.1v
Sugerido Capacidad de la batería: 1300mAh +
Prop sugerido: 11x3.8 o 11x4.7
Max consumo de corriente: 18A (con prop 11x4.7)
Empuje máx: 1000 g +
Sin corriente de carga: 1.4A
Eje: 4M (adapta perfectamente a Towerpor / SF GWS apoyos Fly lenta)
Peso: 78g
Diámetro: 41 mm
Longitud total: 77 mm
Kv: 750rpm / v
Viene con soporte, como se muestra en la imagen

Informe de prueba.
Se utilizó el outrunner DAT700 para alimentar el arte de una tecnología Pitts. Corre con un paquete de 1300mAh 3S1P 20C, 18A y BESC 1147 GWS / de Towerpro apoyo, de lo peor Art-Tech mostró muy bien. Excelente tasa de subida, aunque no hoverable, y con tiempos de vuelo 13minute o más, nos quedamos muy impresionados.
Un outrunner muy eficiente para los modelos de vuelo más lentas de hasta 0,15 tamaño.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    DT750
  • Brand:
    No
  • Peso ( g)
    79.00
  • Longitud
    88.00
  • Ancho:
    45.00
  • Altura:
    51.00
  • Kv (rpm / v)
    No
  • Corrientes max (A)
    No
  • Potencia ( W ):
    No
  • B Longitud ( mm ):
    No
  • Puede longitud D ( mm )
    No
  • Max Voltaje ( V )
    No
  • Un eje ( mm ):
    No
  • Unit Weight (g):
    78
  • C Diámetro ( mm )
    No
  • Longitud Total E ( mm )
    No
  • Resistencia ( MH ):
    No
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Lots of power to pull my home made foam board projects.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.