HK-282 Ultra-Micro Servo 2,2 g / 0,2 kg / 0.08sec

• Overall
• Quality
• Value

Customer Rated

May 21, 2013

I just finished my maiden flight on a scratch build 32 inch F3P airplane. AUW is 116 grams. I have one of these on the rudder, and one on the elevator. Both of these servos performed perfectly! I was very satisfied with the servos in these areas.

When I installed the servos, I broke one. I used Gorilla white glue, and because the glue expands, it got inside and locked up the gears. For the remaining servos, I gave them a protective covering of clear tape.

I had to use the new HKM-282A on the ailerons. so go there to read the review on that one.

• Overall
• Quality
• Value

Customer Rated

Oct 03, 2012

I've bought 4 for my little 3D plane.
These servo are really fast and precise and the weight is only 2.4g!

• Overall
• Quality
• Value

Customer Rated

Sep 27, 2012

To HobbyKing....I received these servos and they work well.There is only one thing you should change on your description of the product.
The plug at the end of the wire is called:Nano Jst and not Micro.I ordered 2 time extention wires for those servos and they where not the good one.After reserching more,i found that is was a Nano Jst Plug.

• Overall
• Quality
• Value

Customer Rated

Sep 19, 2012

I bought 4 of these with a HK Cuckoo as parts suggesetd in the "combo buying offer" as well as an Orange 4Ch Rx also in the combo. However, the plugs on this micro-servo do not fit either Orange or Spektrum Rx's

• Overall
• Quality
• Value

Customer Rated

Jan 05, 2012

Don't buy these expecting to plug them directly into a SuperMicro RX system as the plugs don't fit.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 09, 2011

Good, but use in very micro planes without a lot of trust to keep

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 30, 2011

buen servo muy chico y parece fuerte

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 20, 2011

holy crap, 2.2 from a conventional shaped servo

• Overall
• Quality
• Value

Customer Rated

Aug 14, 2011

I used 2 of these in my DIY ornithopter with 1S lipo. Holding torque is not good.movements are not very precise.The arms jitters with fine movements by the input but manageable. It must be a cheap analogue servo.

• Overall
• Quality
• Value

Certified Buyer Rated

May 06, 2011

SUPER MICRO SIZE 100 CLASS