New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

HKPilot 500mW transmisor-receptor de radio telemetría Set V2 (433Mhz)

HKPilot 500mW transmisor-receptor de radio telemetría Set V2 (433Mhz)

Shipped From:
  • USA
QTY:

Now save guardar 0,00 € 0,00 €

45,08 €
Estado:
En stock
Peso:
125 g
SKU:
387000077-0
WANT FREE SHIPPING? Click here to find out more!

Embalaje 500mW de potencia de salida de este V2 433Mhz Radiotelemetría Conjunto te permite enlazar a un controlador de vuelo, tales como nuestro Mega HKPilot o MultiWii AIO a un dispositivo USB o UART equipado, como un ordenador, portátil o tableta que soporta una conexión USB (OTG). Las nuevas radios V2, ya no tienen un módulo de aire / tierra separado, ya que ambos transceptores pueden utilizar Uart o conexiones USB y soporta ambos modos. Parte de las radios no sólo le permite ver datos en tiempo real, como la posición GPS en vivo en un mapa superpuesto, voltaje del sistema, la partida, punto de referencia de navegación, incluso horizonte artificial y mucho más. El uso de software de código abierto MAVlink estación terrestre basada, incluso se puede volar su avión con una palanca de mando a través de la configuración del equipo y la actualización en vivo! O sólo lo utilizan para sus proyectos de bricolaje que necesita una interfaz serial inalámbrica. Este kit ofrece un precio muy bajo, mayor alcance y un rendimiento superior. El sistema utiliza la banda de 433 MHz y proporciona un enlace dúplex completo mediante módulos HM-TRP de HopeRF ejecutan personalizados, de código abierto, de firmware.

caracteristicas:
• Módulos de 433 MHz de aire intercambiable y terrestres
• Puerto Micro-USB
• conector Molex de 6 posiciones
• potencia de salida máxima de 500 mW (ajustable)
• -117 dBm sensibilidad de recepción
• conector SMA
• 2 vías de comunicación full-duplex a través TDM adaptativo
• Interfaz UART
• enlace serie transparente
• MAVLink encuadre protocolo
• Frecuencia Hopping Spread Spectrum (FHSS)
• ciclo de trabajo configurable
• La corrección de errores corrige hasta un 25% de errores de bit
• Código abierto SIK firmware
• Configurable a través del planificador * * Misión y Planificador de APM

Especificaciones:
Tensión de alimentación: 3,7 a 6 VDC (desde USB o un conector Molex)
Transmitir corriente: 500 mA a 27 dBm
Recibe corriente: 25 mA
Interfaz en serie: 3,3 V UART

Incluido
Dos módulos de radio con antenas
cable micro-USB
Android cable adaptador OTG
Cable conector de 6 hilos Pixhawk
6-a-5-posición del cable conector de APM y PX4
parche autoadhesivo

reglamentos de frecuencia varían según el país, así que consulte a su autoridad local del espacio aéreo para averiguar qué frecuencia es legal en su área.

Nota: La referencia a la APM se refiere al proyecto ArduPilot, una familia de pilotos automáticos de código abierto basado en la plataforma informática de código abierto Arduino, desarrollado por 3DR y la comunidad de código abierto. Se compone de una selección de ArduPilot Mega electrónica (APM) y una serie de versiones de software libre para diferentes vehículos y se rige por una licencia Creative Commons de código abierto.

Nota: Esto no es un producto original de marca Arduino.

  • SKU (Número de Referencia) 387000077-0
  • Brand HKPilot
  • Capacidad ( mAh ) -
  • Peso ( g) 125.00
  • Longitud 110.00
  • Ancho 45.00
  • Altura 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This item is very badly designed, it will make a lot of perturbations especially on the video transmitter and the OSD. This happens even if you put ferrites and use a separate power supply for this module.
Also it drains too much current to be used as is on a Smartphone.

It is possible to decrease the input power in the settings but even at a power lower than 100mW it will still perturbates the OSD and the video emitter.

Avoid this device, with the 433MHz antenna from immersion RC and a dipole antenna on the ground you will reach >7km range with the 100mW version from 3DR without perturbating your other transmissions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This item is very badly designed, it will make a lot of perturbations especially on the video transmitter and the OSD. This happens even if you put ferrites and use a separate power supply for this module.
Also it drains too much current to be used as is on a Smartphone.

It is possible to decrease the input power in the settings but even at a power lower than 100mW it will still perturbates the OSD and the video emitter.

Avoid this device, with the 433MHz antenna from immersion RC and a dipole antenna on the ground you will reach >7km range with the 100mW version from 3DR without perturbating your other transmissions.

I'm getting 3km range with these radios with stock antenna on air radio and dipole on ground station! really great radios at a fantastic price!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm getting 3km range with these radios with stock antenna on air radio and dipole on ground station! really great radios at a fantastic price!!

First set worked for 2 days (ground testing), then one unit stopped working. HK replaced it swiftly. Second unit is working so far, but I suspect they draw too much power for all my android devices, and as a result, dont work on android. Ive had it working once for a short while, but more typically they dont even power up on the OTG cable and if they do, sometimes my phone/tablet will instantly shut off. Tried many OTG cables, 3 different android tablets/phones. I worked around it by connecting a bluetooth module to the radio, and powering those separately, then connect via bluetooth. Setting the tx power in Mission Planner doesnt seem to work. Build quality is mediocre, the case isnt even held together with screws and comes apart too easily. Cutouts for the connectors are a bit small, and connectors can fall out. Nothing you cant solve with some hot glue and tape though. Range not tested so far, but probably excellent based on ground testing results. Oh, and beware, servo's dont like these radio's, you have to keep this unit well clear from servo wires or they will go beserk.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First set worked for 2 days (ground testing), then one unit stopped working. HK replaced it swiftly. Second unit is working so far, but I suspect they draw too much power for all my android devices, and as a result, dont work on android. Ive had it working once for a short while, but more typically they dont even power up on the OTG cable and if they do, sometimes my phone/tablet will instantly shut off. Tried many OTG cables, 3 different android tablets/phones. I worked around it by connecting a bluetooth module to the radio, and powering those separately, then connect via bluetooth. Setting the tx power in Mission Planner doesnt seem to work. Build quality is mediocre, the case isnt even held together with screws and comes apart too easily. Cutouts for the connectors are a bit small, and connectors can fall out. Nothing you cant solve with some hot glue and tape though. Range not tested so far, but probably excellent based on ground testing results. Oh, and beware, servo's dont like these radio's, you have to keep this unit well clear from servo wires or they will go beserk.

Customer files
Telemetry Radio Setup Download [2]
Setup Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!