New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

HKPilot Mega 2.7 regulador de vuelo del USB / GYRO / ACC / MAG / baro

HKPilot Mega 2.7 regulador de vuelo del USB / GYRO / ACC / MAG / baro

Discontinued Product

Please continue searching for a similar product.
Peso:
85 g
SKU:
387000051-0
WANT FREE SHIPPING? Click here to find out more!

Todo el nuevo HK PilotMega 2.7 es una mirada fresca y una renovación del controlador de vuelo basado APM popular. En el transcurso del proyecto y el desarrollo de la plataforma Open Source 2.5 ArduPilot, se han observado algunos problemas conocidos y problemas ergonómicos. El objetivo de la HK PilotMega 2.7 era fijar y mejorar en esta gran plataforma, dando la espalda a la comunidad un diseño que se ha mejorado y estable y sin embargo, a un precio razonable, por lo que esta super potente controlador de vuelo una gran opción fiscal para las variantes de 32 bits. Hay 5 mejora importante en el 2.7, y todos necesitan archivos de construcción están disponibles bajo la etiqueta de los archivos de la comunidad para su uso.

HK PilotMega 2.7 Mejoras:

1) cap 100uF en Vcc y condensador de 10uF tantalio añadió para detener 3.3v malas problemas de salud giroscópicos

2) La sustitución del puerto GPS 1.0mm 6p (no se utiliza / redundante) con el puerto de la brújula externa df13-4P I2C, poniendo los puertos GPS y brújula externa junto a la otra, lo que hace más fácil para las conexiones.

3) Puerto multifunción MUX añadió en la antigua ubicación del puerto I2C, esto permite al usuario seleccionar una salida del bloque de unión (UART0, UART2, I2C, OSD "por defecto es de OSD". Este nuevo diseño hace que la transmisión de datos más estable con una resistencia de aislamiento.

4) 3.3V y 5V Dataflash / Flashrom intercambiado problema traza corregido a la AT45DB161.

5) Brújula externa habilitar / deshabilitar puente añadió, versos tener que cortar un alambre rastro.

El Mega HKPilot 2.7 se basa en la rápida evolución de mega ArduPilot y refinado o un proyecto de código abierto de la robótica 3DR "APM",. Este controlador de vuelo increíble permite al usuario activar cualquier ala fija, ala giratoria, o vehículo multi-rotor (incluso barcos y automóviles) en un vehículo completamente autónomo, capaz de realizar una amplia gama de tareas, incluso programadas misiones GPS con puntos de referencia (con la módulo GPS opcional).

Varias interfaces de usuario están disponibles para la programación, la revisión de los registros, incluso algunas aplicaciones para teléfonos inteligentes y tabletas. La radio telemetría opcional permite la comunicación de radio de dos vías que le da el control total y proporciona datos en tiempo real a su ordenador o tableta. La lista de lo que este controlador de vuelo es capaz de rápidamente ha sido superada por lo que no se puede, con las características, modos de vuelo y las plataformas soportadas. El proyecto de APM es apoyado por miles de usuarios que empujan este controlador de vuelo de código abierto para ser uno de los mejores sistemas disponibles.

caracteristicas:
• 3.3v tema de la "mala Heath Gyro" resuelto en el 2,7
• Conectores reubicados para un mejor diseño de alambre
• Puerto Mux añadido para OSD u otras salidas seleccionables
• DATAFLASH intercambiado líneas de tensión fija en el 2,7
• Puente brújula externa añadió
• Compatible Arduino
• Pre-soldado y probado
• giroscopio de 3 ejes, acelerómetro, magnetómetro y de alto rendimiento barómetro
• Construido en el chip de 4 MP Dataflash para el registro automático de datos
• brújula Honeywell HMC5883L-TR Digital
• 6 GDL Acelerómetro / Gyro MPU-6000 de Invensense
• Sensor de presión barométrica MS5611-01BA03 Measurement Specialties.
• Atmel Atmega2560 y ATMEGA32U-2 (procesamiento y la función USB).
• Micro USB
• Compás de la ayuda externa
• La entrada de GPS, I2C, la entrada del módulo de alimentación
• puertos de sensores de radio telemetría, OSD y la velocidad del aire

Especificaciones:
Dimensiones: 44x70x15mm (con el caso)
Peso: 32g (con el caso)

incluye:
HKPilot Mega 2.7
Líneas de alimentación x 5
Caso y 3M cinta de doble cara

* Nota: La referencia a la APM se refiere a la ArduPilot proyecto, una familia de pilotos automáticos de código abierto basado en la plataforma informática de código abierto Arduino, desarrollado por 3DR y la comunidad de código abierto. Se compone de una selección de ArduPilot Mega electrónica (APM) y una serie de versiones de software libre para diferentes vehículos y se rige por una licencia Creative Commons de código abierto. Este producto se basa en el proyecto de código abierto de APM Robótica 3D, los archivos CAD por la licencia de Creative Commons está disponible bajo la etiqueta de archivos.

* Nota: Este no es un producto original de marca Arduino.

  • SKU (Número de Referencia) 387000051-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso ( g) 85.00
  • Longitud 110.00
  • Ancho 45.00
  • Altura 80.00
  • HK PilotMega 2.7
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

Awesome flight controller! You can do anything with this!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome flight controller! You can do anything with this!

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

  1. 1
  2. 2
  3. 3
Customer files
Link to optical flow guide Download [10]
Optical Flow Pinout Download [126]
Powet Rails Download [253]
No File Name Download [20]
No File Name Download [99]
high res PDF of board schematic Download [49]
11x17 PDF of 2.7 schematic Download [47]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save